Skip to contentSkip to conversation

Simtec BAST (EB2410ITX) / Thorcom VR1000 driver

PATCH In review Ben Dooks 2 participants 3 messages Sep 28, 2004 – Oct 1, 2004 libata

lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

PATCH 1/1 Simtec BAST (EB2410ITX) / Thorcom VR1000 driver

Patch to provide support for the following two boards:

- Simtec BAST (EB2410ITX)
- Thorcom VR1000

---
 drivers/ide/Kconfig        |    7 +++
 drivers/ide/arm/Makefile   |    1 
 drivers/ide/arm/bast-ide.c |   80 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 88 insertions(+)
drivers/ide/Kconfig +7 -0
diff -urN -X ../dontdiff linux-2.6.9-rc2-bk11/drivers/ide/Kconfig linux-2.6.9-rc2-bk11-ide1/drivers/ide/Kconfig
@@ -830,6 +830,13 @@
 	  Say Y here if you want to support the Yellowstone RapIDE controller
 	  manufactured for use with Acorn computers.
 
+config BLK_DEV_IDE_BAST
+	tristate "Simtec BAST / Thorcom VR1000 IDE support"
+	depends on ARM && (ARCH_BAST || MACH_VR100)
+	help
+	  Say Y here if you want to support the onboard IDE channels on the
+	  Simtec BAST or the Thorcom VR1000
+
 config BLK_DEV_GAYLE
 	bool "Amiga Gayle IDE interface support"
 	depends on AMIGA
drivers/ide/arm/Makefile +1 -0
diff -urN -X ../dontdiff linux-2.6.9-rc2-bk11/drivers/ide/arm/Makefile linux-2.6.9-rc2-bk11-ide1/drivers/ide/arm/Makefile
@@ -1,5 +1,6 @@
 
 obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
 obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
+obj-$(CONFIG_BLK_DEV_IDE_BAST)		+= bast-ide.o
 
 EXTRA_CFLAGS	:= -Idrivers/ide
drivers/ide/arm/bast-ide.c +80 -0

80 lines not on this page · raw message

author
#1 lore raw
Quoted 6 lines · Ben Dooks

Patch to provide support for the following two boards:

- Simtec BAST (EB2410ITX)
- Thorcom VR1000

Is the correct way to get an ide driver patch submitted to mail [email protected], or do I need to copy in other lists/people as well?

thanks,

Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'
#2 lore raw
Quoted 11 lines · Ben Dooks
Quoted 6 lines · Ben Dooks

Patch to provide support for the following two boards:

- Simtec BAST (EB2410ITX)
- Thorcom VR1000

Is the correct way to get an ide driver patch submitted to mail [email protected], or do I need to copy in other lists/people as well?

Correct way, please also cc: me.
(I see you did it a while ago).

It is all my fault, I will push it today to Linus. Sorry for delay.

PS I need to remove bastide_exit() for now until IDE core
is fixed to support removal of interfaces

Thanks,
Bartlomiej