Skip to contentSkip to conversation

Reading ati_remote keypresses in userland

DISCUSSION Tony Howat 2 participants 2 messages Oct 2, 2004

lore
Share & tools
lore

Tony Howat

author
#0 lore raw

I have an ati_ remote, and the ati_remote module loaded, the 2.2.0 version with kernel version 2.6.5-1. It works in that I can see data
on /dev/input/mice when I use the mouse type controls on the remote. However I need to use the keyboardish buttons to control my application.

Having read round it seemed the /dev/input/event devices would be the key. I put together some code to find the right event device and dump the output from a linux journal article :

The device on /dev/input/event0 says its name is PS/2 Generic Mouse The device on /dev/input/event1 says its name is AT Translated Set 2 keyboard
The device on /dev/input/event2 says its name is X10 Wireless Technology Inc USB Receiver
evdev driver version is 1.0.0

...but there's no output turning up when I read from the file descriptor. However, running the module in debug mode does give meaningful output to /var/log/messages :

Sep 28 18:27:44 marmot last message repeated 10 times 
Sep 28 18:27:50 marmot kernel: ati_remote 1-2:1.0: channel 0x0f; data d4,0f; 
index 16; keycode 4 
Sep 28 18:27:51 marmot last message repeated 10 times 
Sep 28 18:27:52 marmot kernel: ati_remote 1-2:1.0: channel 0x0f; data dc,17; 
index 23; keycode 11 
Sep 28 18:27:54 marmot last message repeated 14 times 
Sep 28 18:28:19 marmot kernel: ati_remote 1-2:1.0: channel 0x0f; data c8,03; 

index 33; keycode 148

I'm a bit confused. Which device should I be looking at for these keypresses? Am I missing something?

My test code is at http://www.i-r-genius.com/remoteend.c

Could anyone confirm exactly which device these keypresses should turn up on and the method for reading them?

Thanks for any help.

The aim of this project is to provide a simple control for music player daemon (http://www.musicpd.org/) without the need for X. I will, of course, release the code when done.

--
Tony

#1 lore raw

Hi!

Quoted 16 lines

I have an ati_ remote, and the ati_remote module loaded, the 2.2.0 version with kernel version 2.6.5-1. It works in that I can see data
on /dev/input/mice when I use the mouse type controls on the remote. However I need to use the keyboardish buttons to control my application.

Having read round it seemed the /dev/input/event devices would be the key. I put together some code to find the right event device and dump the output from a linux journal article :

The device on /dev/input/event0 says its name is PS/2 Generic Mouse The device on /dev/input/event1 says its name is AT Translated Set 2 keyboard
The device on /dev/input/event2 says its name is X10 Wireless Technology Inc USB Receiver
evdev driver version is 1.0.0

Quoted 3 lines

...but there's no output turning up when I read from the file descriptor. However, running the module in debug mode does give meaningful output to /var/log/messages :

You need to read in slightly special way, see for example evtest.

Pavel

Signature · 2 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!