smc91111
Hi all,
I've got a hacked version of the smc91111 driver from an old arm tree that I'm happily using on my board at work - I'll post patches for it in due course as we use a custom 16bit bus that physically looks and acts like ISA (but really is cunningly slightly different in timing and spec as it's a soft core implemented bridge bodged together to work on a dev board. mmmmmm.).
Today I had to add some ethtool support to the driver to support using howl (anybody else use that to do Zero Conf?) and was debating fixing up http://criticalmass.sourceforge.net/kernel/smc91x/ to work with odd bus types like ours (it's a lot of work and testing compared with a quick hack to get this done on time so this question is more hyperthetical when I'm done with the immediate problem).
Who is using the SMC91111 family of MACs and if so which driver do you use?
Jon.
Quoted 2 lines · Jon Masters
Who is using the SMC91111 family of MACs and if so which driver do you use?
On the redwood5 and redwood6 boards I use the smc91x driver from bk://linux.bkbits.net/linux-2.6/drivers/net/smc91x.[ch]. I had to add redwood-specific in/out macros to smc91x.h, and use the platform_device interface rather than OCP, but it's nice to have a single smc91x driver.
-Dale