Skip to contentSkip to conversation

Heavy load of graphics

DISCUSSION Ankit Jain 10 participants 21 messages Oct 5, 2004 – Oct 8, 2004

lore
Share & tools
lore

Ankit Jain

author
#0 lore raw

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

thanks

Ankit

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 3 lines · Ankit Jain

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

What makes you think you need to reduce memory usage? There is no penalty for using all of memory (but there is when you try to use more than is available). Modern operating systems use physical RAM for all kinds of things (e.g., disc cache) that are released only when something else needs RAM. Ignore the "RAM in use" indicators; instead pay attention to disc I/O (both I/Os per second and MBs per second) and perhaps CPU utilization. Real memory pressure is best monitored by watching for disc I/Os related to swapping and perhaps page faults.

--
Jeff Woods <[email protected]>

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw
In reply to Ankit Jain
Quoted 4 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

Quoted 8 lines

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

When you say "the most of the memory is lost", what exactly do you mean by "lost"?

Any Linux system will gradually "use" 100% of available (real, not swap) memory, by the common measures of "use", such as the diaplay in "top" or on the first line of "free". But most of this memory (on a typical system, anyway) is used for "cache and buffer", a jargony phrase that means, in plain English, that Linux keeps in memory copies of recently run executables and recently accessed data files.

You see one effect of this bit of optimizing when you run a command and it takes a couple of seconds to run, then run it again and it runs close to instantly. The difference, often, is that the first time, the command had to be loaded from disk, but the second time it was cached.

But the kernel knows to make this memory available to any new processes that need it, so it is available to users.

To see how much of your RAM is being used for cache and buffer, run "free" and look at the entries on the second line.

OF course, all of this response is a guess. A 128 MB system running a rich GUI like KDE might well use most of its RAM for real; here, for example, the system I have that runs KDE really is using about 200 MB of its 768 MB of RAM. But to be using most of 512 MB of RAM, you would have to be running a lot of apps.

If you really are using memory with active applications, then your only solution is to run fewer, or smaller, apps. To help at that level, we'd need to know more of the details of how your system is set up.

PS - I'd appreciate your using standard English spellings, capitalization, punctuation, and syntax in future postings. The shortcuts you used made it hard for me to read your message, anough so that I almost did not take the time to reply to it.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw
In reply to Ankit Jain
Quoted 10 lines · Ankit Jain

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

How much memory does your video cards have? This amount is included in the reported size of the X server, so just subtract it, and see whether the result looks saner.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#4 lore raw
In reply to Ankit Jain
Quoted 13 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

Quoted 5 lines

thanks

Ankit

Could you please post your ps -Al, /proc/meminfo, and lspci output? I know Red Hat has a lot of standard daemons (PCMCIA, ISDN, etc) that are started by default - have you used chkconfig or redhat-config-services to shut off unneded services?

The kernel also uses a lot of free memory for I/O caching - even my P4 w/ 1GB RAMBUS shows 90% memory consumption in /proc/meminfo. Caching is a low-priority memory allocation - when the system needs memory for active processes, it should give the memory to the process.

BTW, unless you are using a framebuffer kernel-level driver, X is handled almost exclusively in userland. On SPARC32 (for example) framebuffers are pretty much the only way to get X working, but mostly, XFree86 and the X.org server that comes with FC2 use mostly user-space drivers. -
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#5 lore raw

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons (PCMCIA, ISDN, etc) that are started by default - have you used chkconfig or redhat-config-services to shut off unneded services?" as u said...how to do this. i am intrested in closing these services

thanks again

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:
cached:
Mem: 120741888 118902784 1839104 0 1695744
74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB

[ankit@Ankit ankit]$ ps -al
F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY
TIME CMD
0 R 501 4306 4279 0 75 0 - 778 -
pts/0 00:00:00 ps
[ankit@Ankit ankit]$

Quoted 53 lines · --- Jim Nelson
Quoted 3 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb

RAM

Quoted 2 lines

i have seen not only on this sytem but the other

one

Quoted 2 lines

having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around

90%

Quoted 1 line

is occupied by the xsever and on the sys with 512

Mb

Quoted 1 line

RAM around 70% is occupied. how to reduce this

load. i

Quoted 1 line

oculd not get any article or stuff relate to this .

if

Quoted 8 lines

we can do something in kernel or in some way reduce this load while working in GUI envt

thanks

Ankit

Could you please post your ps -Al, /proc/meminfo, and lspci output? I
know Red Hat has a lot of standard daemons (PCMCIA, ISDN, etc) that are
started by default - have you used chkconfig or redhat-config-services
to shut off unneded services?

The kernel also uses a lot of free memory for I/O caching - even my P4
w/ 1GB RAMBUS shows 90% memory consumption in /proc/meminfo. Caching is
a low-priority memory allocation - when the system needs memory for
active processes, it should give the memory to the process.

BTW, unless you are using a framebuffer kernel-level driver, X is
handled almost exclusively in userland. On SPARC32 (for example)
framebuffers are pretty much the only way to get X working, but mostly,
XFree86 and the X.org server that comes with FC2 use mostly user-space
drivers.

Quoted 9 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.linux-learn.org/faqs

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#6 lore raw
Quoted 6 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

Quoted 10 lines

"I know Red Hat has a lot of standard daemons (PCMCIA, ISDN, etc) that are started by default - have you used chkconfig or redhat-config-services to shut off unneded services?" as u said...how to do this. i am intrested in closing these services

thanks again

Easiest way to do this is to start an xterm, su to root, and type "redhat-config-services &". That will give you a GUI to select the services you wish to run. Depending on how much you selected when installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting into command-line mode, and runlevel 5 is the standard graphical login level.

The only critical services controlled by this are network, syslog, xinetd, and nfslock (if you are using NFS). Do not disable those unless you know what you're doing it for. iptables is the firewall control (only disable if you are in a very well protected network).

Most everything else can be turned off.

Quoted 17 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:
cached:
Mem: 120741888 118902784 1839104 0 1695744
74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 10 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB

128 MB RAM is marginal for using KDE or Gnome on RH9. You can do it (that's all I had on my first Linux box) but it's a pig.

You've got almost 70 MB in swap - over 30% of your total process memory. BTW - what kind of computer is it? If it's not some oddball hardware, your best solution is some RAM. 256 MB is enough to make X happy.

Quoted 6 lines

[ankit@Ankit ankit]$ ps -al
F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY
TIME CMD
0 R 501 4306 4279 0 75 0 - 778 - pts/0 00:00:00 ps

The difference between 'ps -al' and 'ps -Al' (note the uppercase A) is that ps -Al shows all of the processes running on the computer - whereas ps -al only shows the processes running on the terminal that ran the command.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#7 lore raw

thanks a lot for help

but at this moment i am trying to find out what services i should stop with this redhat-config service

and also i am confused in 1 more topic. top shows a col on priority under PRI and also ps -Al shows a col of priority i.e PRI what is the difference b/w both becaz both shows different values

rest inline

Quoted 33 lines · --- Jim Nelson
Quoted 7 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons

(PCMCIA,

Quoted 1 line

ISDN, etc) that are started by default - have you

used

Quoted 8 lines

chkconfig or redhat-config-services to shut off unneded services?" as u said...how to do this. i am intrested in closing these services

thanks again

Easiest way to do this is to start an xterm, su to root, and type
"redhat-config-services &". That will give you a GUI to select the
services you wish to run. Depending on how much you selected when
installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting into command-line mode,
and runlevel 5 is the standard graphical login level.

Quoted 8 lines

The only critical services controlled by this are network, syslog,
xinetd, and nfslock (if you are using NFS). Do not disable those unless
you know what you're doing it for. iptables is the firewall control
(only disable if you are in a very well protected network).

do u know any document to know all this?

Quoted 37 lines

Most everything else can be turned off.

Quoted 4 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:
cached:
Mem: 120741888 118902784 1839104 0

1695744

Quoted 13 lines

74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 10 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB

128 MB RAM is marginal for using KDE or Gnome on RH9. You can do it
(that's all I had on my first Linux box) but it's a pig.

Quoted 7 lines

You've got almost 70 MB in swap - over 30% of your total process
memory. BTW - what kind of computer is it? If it's not some oddball
hardware, your best solution is some RAM. 256 MB is enough to make X happy.

no X takes more than 70 % of memory with a system with 512 Mb of RAM i had seen that

and also as calculated it shows tyhat system uses around 99Mb of RAM but it says only 2Mb is free? what else is using that memory?

thanks

ankit

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#8 lore raw
Quoted 7 lines · Ankit Jain

thanks a lot for help

but at this moment i am trying to find out what services i should stop with this redhat-config service

Pretty much anything you aren't going to use - if it's a desktop machine, for example, you don't need sendmail running, for example. As I mentioned before,

The only critical services controlled by this are network, syslog, xinetd, and nfslock (if you are using NFS). Do not disable those unless you know what you're doing it for. iptables is the firewall control (only disable if you are in a very well protected network).

Quoted 7 lines

and also i am confused in 1 more topic. top shows a col on priority under PRI and also ps -Al shows a col of priority i.e PRI what is the difference b/w both becaz both shows different values

I'm not sure what the PRI column in "ps -Al" is bringing up - it's definitely not System V or BSD priority - I think it might be the actual kernel scheduler priority, whereas top and "ps al" show standard BSD-style priorities.

Someone else have more info?

Quoted 54 lines

rest inline

Quoted 41 lines · --- Jim Nelson
Quoted 9 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons

(PCMCIA,

Quoted 3 lines

ISDN, etc) that are started by default - have you

used

Quoted 10 lines

chkconfig or redhat-config-services to shut off unneded services?" as u said...how to do this. i am intrested in closing these services

thanks again

Easiest way to do this is to start an xterm, su to
root, and type "redhat-config-services &". That will give you a GUI to select the services you wish to run. Depending on how much you selected when installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting into command-line mode, and runlevel 5 is the standard graphical login level.

Quoted 7 lines

The only critical services controlled by this are
network, syslog, xinetd, and nfslock (if you are using NFS). Do not disable those unless you know what you're doing it for. iptables is the firewall control (only disable if you are in a very well protected network).

Quoted 4 lines

do u know any document to know all this?

Some is experience (killed my first box more times than I care to admit), and most of it came from a book I bought that came with RH9. Each service listed is actually a reference to a set of scripts in /etc/rc.d/init.d - Red Hat-based distros use System V-style initialization, with different runlevels for different functionality.

It takes some research, sometimes, to understand what each service mentioned does. Honestly, a dead-tree book or 20 is a great resource - especially when booting off a rescue disk and trying to remember what you need to do to fix your system.

Quoted 50 lines
Quoted 38 lines

Most everything else can be turned off.

Quoted 6 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:
cached:
Mem: 120741888 118902784 1839104 0

1695744

Quoted 13 lines

74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 12 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB
Quoted 11 lines

128 MB RAM is marginal for using KDE or Gnome on
RH9. You can do it (that's all I had on my first Linux box) but it's a pig.

You've got almost 70 MB in swap - over 30% of your
total process memory. BTW - what kind of computer is it? If it's not some oddball hardware, your best solution is some RAM. 256 MB is enough to make X happy.

Quoted 9 lines

no X takes more than 70 % of memory with a system with 512 Mb of RAM i had seen that

and also as calculated it shows tyhat system uses around 99Mb of RAM but it says only 2Mb is free? what else is using that memory?

The filesystem cache. From my machine:

[jim@david c]$ cat /proc/meminfo

MemTotal:       905280 kB
MemFree:         46700 kB
Buffers:        110792 kB
Cached:         267252 kB
SwapCached:         24 kB
Active:         412068 kB
Inactive:       143296 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       905280 kB
LowFree:         46700 kB
SwapTotal:     1048816 kB
SwapFree:      1048728 kB
Dirty:              20 kB
Writeback:           0 kB
Mapped:         227936 kB
Slab:           292576 kB
Committed_AS:   313896 kB
PageTables:       2048 kB
VmallocTotal:   122840 kB
VmallocUsed:      3520 kB
VmallocChunk:   118236 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB

This is from a 2.6 kernel, so a few things might be a bit different, but the general scheme is the same. Notice over 350 MB are consumed by buffers and the cache - but let me go and start GIMP and open a whole bunch of high-resolution pictures and I get:

[jim@david c]$ cat /proc/meminfo

MemTotal:       905280 kB
MemFree:          7280 kB
Buffers:         44084 kB
Cached:         263280 kB
SwapCached:        148 kB
Active:         511560 kB
Inactive:        96392 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       905280 kB
LowFree:          7280 kB
SwapTotal:     1048816 kB
SwapFree:      1046204 kB
Dirty:             760 kB
Writeback:           0 kB
Mapped:         370692 kB
Slab:           278784 kB
Committed_AS:   445752 kB
PageTables:       2524 kB
VmallocTotal:   122840 kB
VmallocUsed:      3520 kB
VmallocChunk:   118236 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB

Notice how the buffer memory consumption is cut in half? I've still got 7 MB free memory - Linux tries to keep some memory free at all times to prevent a machine from thrashing itself to death. Notice also that the active memory count went up - and I actually had some stuff moved to my disk swap space.

Now, my system responsiveness is not hindered at all - even with 20 pictures open in the GIMP.

Let's put the smackdown on this thing and open 120 pictures at 14.7 MB each.

MemTotal:       905280 kB
MemFree:          7412 kB
Buffers:          1404 kB
Cached:          73284 kB
SwapCached:     102004 kB
Active:         776724 kB
Inactive:        85120 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       905280 kB
LowFree:          7412 kB
SwapTotal:     1048816 kB
SwapFree:       622796 kB
Dirty:             604 kB
Writeback:           0 kB
Mapped:         777052 kB
Slab:            23984 kB
Committed_AS:  1250072 kB
PageTables:       3308 kB
VmallocTotal:   122840 kB
VmallocUsed:      3520 kB
VmallocChunk:   118236 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB

Notice 400 MB swapped to disk, the buffers have dwindled to less than 1% of the consumption of an unloaded system, and the I/O cache is 25% of an unloaded system. There is noticable lag when switching between workspaces now.

That's where the extra memory is going.

Quoted 9 lines

thanks

ankit

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#9 lore raw
In reply to Ankit Jain
Quoted 121 lines · Ankit Jain

thanks a lot for help

but at this moment i am trying to find out what services i should stop with this redhat-config service

and also i am confused in 1 more topic. top shows a col on priority under PRI and also ps -Al shows a col of priority i.e PRI what is the difference b/w both becaz both shows different values

rest inline

Quoted 41 lines · --- Jim Nelson
Quoted 9 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons

(PCMCIA,

Quoted 3 lines

ISDN, etc) that are started by default - have you

used

Quoted 10 lines

chkconfig or redhat-config-services to shut off unneded services?" as u said...how to do this. i am intrested in closing these services

thanks again

Easiest way to do this is to start an xterm, su to
root, and type "redhat-config-services &". That will give you a GUI to select the services you wish to run. Depending on how much you selected when installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting into command-line mode, and runlevel 5 is the standard graphical login level.

Quoted 7 lines

The only critical services controlled by this are
network, syslog, xinetd, and nfslock (if you are using NFS). Do not disable those unless you know what you're doing it for. iptables is the firewall control (only disable if you are in a very well protected network).

do u know any document to know all this?

Quoted 38 lines

Most everything else can be turned off.

Quoted 6 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:
cached:
Mem: 120741888 118902784 1839104 0

1695744

Quoted 13 lines

74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 12 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB
Quoted 11 lines

128 MB RAM is marginal for using KDE or Gnome on
RH9. You can do it (that's all I had on my first Linux box) but it's a pig.

You've got almost 70 MB in swap - over 30% of your
total process memory. BTW - what kind of computer is it? If it's not some oddball hardware, your best solution is some RAM. 256 MB is enough to make X happy.

no X takes more than 70 % of memory with a system with 512 Mb of RAM i had seen that

Quoted 9 lines

and also as calculated it shows tyhat system uses around 99Mb of RAM but it says only 2Mb is free? what else is using that memory?

thanks

ankit

Dear Ankit:

I am not sure what your goal is.
Is it to increase available RAM by 'tuning' your system, rather than by installing more RAM memory?
I think that 'top' will display running programs and sort them by the memory they consume
(or try to comsume).
What programs or services are installed in your setup and how much memory are they consuming?
You probably need look no futher than the 'top ten'.

Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#10 lore raw
Quoted 150 lines · --- chuck gelm
Quoted 4 lines · Ankit Jain

thanks a lot for help

but at this moment i am trying to find out what services i should stop with this redhat-config

service

Quoted 3 lines

and also i am confused in 1 more topic. top shows a col on priority under PRI and also ps -Al shows a

col

Quoted 32 lines

of priority i.e PRI what is the difference b/w both becaz both shows different values

rest inline

Quoted 24 lines · --- Jim Nelson
Quoted 9 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons

(PCMCIA,

Quoted 3 lines

ISDN, etc) that are started by default - have you

used

Quoted 2 lines

chkconfig or redhat-config-services to shut off
unneded services?" as u said...how to do this. i

am

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

intrested in closing these services

thanks again

Quoted 5 lines
Quoted 5 lines

Easiest way to do this is to start an xterm, su to root, and type
"redhat-config-services &". That will give you a GUI to select the
services you wish to run. Depending on how much

you

Quoted 4 lines
Quoted 4 lines

selected when
installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting

into

Quoted 7 lines
Quoted 7 lines

command-line mode,
and runlevel 5 is the standard graphical login
level.

The only critical services controlled by this are
network, syslog,
xinetd, and nfslock (if you are using NFS). Do

not

Quoted 2 lines
Quoted 2 lines

disable those unless
you know what you're doing it for. iptables is

the

Quoted 6 lines
Quoted 5 lines

firewall control
(only disable if you are in a very well protected
network).

Quoted 46 lines

do u know any document to know all this?

Quoted 42 lines

Most everything else can be turned off.

Quoted 7 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:

cached:
Mem: 120741888 118902784 1839104 0

1695744

Quoted 13 lines

74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 12 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB

128 MB RAM is marginal for using KDE or Gnome on
RH9. You can do it
(that's all I had on my first Linux box) but it's

a

Quoted 5 lines
Quoted 5 lines

pig.

You've got almost 70 MB in swap - over 30% of your total process
memory. BTW - what kind of computer is it? If

it's

Quoted 2 lines
Quoted 2 lines

not some oddball
hardware, your best solution is some RAM. 256 MB

is

Quoted 6 lines
Quoted 4 lines

enough to make X happy.

no X takes more than 70 % of memory with a system

with

Quoted 4 lines

512 Mb of RAM i had seen that

and also as calculated it shows tyhat system uses around 99Mb of RAM but it says only 2Mb is free?

what

Quoted 2 lines

else is using that memory?

Quoted 8 lines
Quoted 5 lines

thanks

ankit

Dear Ankit:

I am not sure what your goal is.

:) well my goal is to increase available RAM by tuning the sytem

11:08:00 up 25 min, 2 users, load average: 0.21, 0.13, 0.10
60 processes: 57 sleeping, 3 running, 0 zombie, 0 stopped
CPU states: 0.9% user 0.0% system 0.0% nice
0.0% iowait 99.0% idle
Mem: 117912k av, 116684k used, 1228k free,
0k shrd, 1660k buff

                     65128k actv,    4760k in_d,   
1644k in_c
Swap:  522072k av,   40556k used,  481516k free       
           32240k cached

PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM
TIME CPU COMMAND
3598 root 15 0 139M 5316 872 R 0.7 4.5
0:18 0 X
3790 ankit 15 0 1048 1048 848 R 0.1 0.8
0:00 0 top

    1 root      15   0    88   60    40 S     0.0  0.0
  0:03   0 init
    2 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 keventd
    3 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kapmd
    4 root      35  19     0    0     0 SWN   0.0  0.0
  0:00   0 ksoftirqd_CPU0
    9 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 bdflush
    5 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kswapd
    6 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/DMA
    7 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/Normal
    8 root      15   0     0    0     0 SW    0.0  0.0

0:00 0 kscand/HighMem
10 root 15 0 0 0 0 SW 0.0 0.0
0:00 0 kupdated
11 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 mdrecoveryd
110 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 khubd
3180 root 15 0 188 156 112 S 0.0 0.1
0:00 0 syslogd
3184 root 15 0 56 4 0 S 0.0 0.0
0:00 0 klogd
3202 rpc 15 0 72 0 0 SW 0.0 0.0
0:00 0 portmap
3221 rpcuser 25 0 76 0 0 SW 0.0 0.0
0:00 0 rpc.statd
3288 root 24 0 52 4 0 S 0.0 0.0
0:00 0 apmd
3325 root 25 0 240 4 0 S 0.0 0.0
0:00 0 sshd

if u will calculate this it will show very less
compared to qhat it displays. becaz it displays
only1.5 Mb to be free

thanks

ankit

Quoted 14 lines

Is it to increase available RAM by 'tuning' your system,
rather than by installing more RAM memory?
I think that 'top' will display running programs and sort them by the memory they consume
(or try to comsume).
What programs or services are installed in your setup
and how much memory are they consuming?
You probably need look no futher than the 'top ten'.

Chuck

Quoted 9 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.linux-learn.org/faqs

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#11 lore raw

Now that I better understand your goal, let me try to offer some suggestions.

First, try using "ps aux" to get a more readable, and complete, picture of your memory use. "top" sorts by recent activity in its default setting, and that is not the best way to find what processes are using the most memory. "ps aux" will give you a complete list of processes running, and by scanning the "RSS" column (or running the output through "sort" using that column), you can spot the ones using a lot of RAM.

From what you sent, X *itself* is probably not the culprit in your case. Though its VSS size is high, its RSS size is only about 6 MB (4.5% of RAM). Since you only sent a list of the top 20 or so processes sorted by by CPU use (not by RAM use), no one will be able to use this list to suggest ways to trim memory use.

What running processes you can trim depends on what you are using the system for. A workstation oriented toward development, for example, needs fewer services running than a system indended to provide, say, e-mail forwarding to a LAN.

Your choice of window manager also matters. For example, here on a workstation I run KDE, and it starts up a whole bunch of k* processes. Each individually uses very little RAM, but there are something like 20 of them, and cumulatively they occupy a lot of RAM. I can put up with this load because I have 768 MB of RAM in the system, but ut would be intolerable on a system sized like yours.

If you don't need all the KDE hoohas, you can switch to a more lightweight window manager -- for example, blackbox, XFce, or fluxbox ... actually, when compared to KDE, almost *any* other WM is "lightweight" -- and save a lot of RAM. (If you really need to run KDE, you probably want to take the suggestion someone else (Chuck? Jim? it's hard to tell who said what) already made to increase physical RAM.)

BTW, when considering priority issues, you would do better to focus on the NI (nice'ness) entry for each process, not its PRI (priority) entry. The NI value reflects what you (or root) can reset with "nice", and that is probably more important to you than varying representations of the actual, running priority (PRI) of the process.

I don't know, or recall, what the difference you are seeing means ... but as a general matter, "ps" options that are preceded by a "-" call for AT&T-style Unix syntax, while ones without the "-" call for BSD syntax. "top", I believe, uses BSD syntax. So to figure out how the two PRI representations differ, I would look into the differences between the two Unix forks.

If your looking at PRI is based on the system responding sluggishly ... I suspect that derives from its use of swap. Compared to physical RAM, swap access is painfully slow. It just doesn't support acceptable (by most people) performance for real-time processes like UIs or the usual desktop applications. Your other focus, on reducing use of RAM, is the right place to concentrate your efforts.

Quoted 220 lines · Ankit Jain
Quoted 150 lines · --- chuck gelm
Quoted 4 lines · Ankit Jain

thanks a lot for help

but at this moment i am trying to find out what services i should stop with this redhat-config

service

Quoted 3 lines

and also i am confused in 1 more topic. top shows a col on priority under PRI and also ps -Al shows a

col

Quoted 32 lines

of priority i.e PRI what is the difference b/w both becaz both shows different values

rest inline

Quoted 24 lines · --- Jim Nelson
Quoted 9 lines · Ankit Jain

thanks

this is the output

i am using redhat linux 9.0

"I know Red Hat has a lot of standard daemons

(PCMCIA,

Quoted 3 lines

ISDN, etc) that are started by default - have you

used

Quoted 2 lines

chkconfig or redhat-config-services to shut off
unneded services?" as u said...how to do this. i

am

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

intrested in closing these services

thanks again

Quoted 5 lines
Quoted 5 lines

Easiest way to do this is to start an xterm, su to root, and type
"redhat-config-services &". That will give you a GUI to select the
services you wish to run. Depending on how much

you

Quoted 4 lines
Quoted 4 lines

selected when
installing, it could be quite a bit.

Runlevel 3 is the Red Hat standard for booting

into

Quoted 7 lines
Quoted 7 lines

command-line mode,
and runlevel 5 is the standard graphical login
level.

The only critical services controlled by this are
network, syslog,
xinetd, and nfslock (if you are using NFS). Do

not

Quoted 2 lines
Quoted 2 lines

disable those unless
you know what you're doing it for. iptables is

the

Quoted 6 lines
Quoted 5 lines

firewall control
(only disable if you are in a very well protected
network).

Quoted 46 lines

do u know any document to know all this?

Quoted 42 lines

Most everything else can be turned off.

Quoted 7 lines

[ankit@Ankit ankit]$ cat /proc/meminfo
total: used: free: shared: buffers:

cached:
Mem: 120741888 118902784 1839104 0

1695744

Quoted 13 lines

74162176

Swap: 534601728 69509120 465092608
MemTotal:       117912 kB
MemFree:          1796 kB
MemShared:           0 kB
Buffers:          1656 kB
Cached:          36536 kB
SwapCached:      35888 kB
Active:          65144 kB
ActiveAnon:      37092 kB
ActiveCache:     28052 kB
Inact_dirty:      4852 kB
Inact_laundry:    6728 kB
Quoted 12 lines
Inact_clean:      1068 kB
Inact_target:    15556 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       117912 kB
LowFree:          1796 kB
SwapTotal:      522072 kB
SwapFree:       454192 kB

128 MB RAM is marginal for using KDE or Gnome on
RH9. You can do it
(that's all I had on my first Linux box) but it's

a

Quoted 5 lines
Quoted 5 lines

pig.

You've got almost 70 MB in swap - over 30% of your total process
memory. BTW - what kind of computer is it? If

it's

Quoted 2 lines
Quoted 2 lines

not some oddball
hardware, your best solution is some RAM. 256 MB

is

Quoted 6 lines
Quoted 4 lines

enough to make X happy.

no X takes more than 70 % of memory with a system

with

Quoted 4 lines

512 Mb of RAM i had seen that

and also as calculated it shows tyhat system uses around 99Mb of RAM but it says only 2Mb is free?

what

Quoted 2 lines

else is using that memory?

Quoted 8 lines
Quoted 5 lines

thanks

ankit

Dear Ankit:

I am not sure what your goal is.

:) well my goal is to increase available RAM by tuning the sytem

11:08:00 up 25 min, 2 users, load average: 0.21, 0.13, 0.10
60 processes: 57 sleeping, 3 running, 0 zombie, 0 stopped
CPU states: 0.9% user 0.0% system 0.0% nice
0.0% iowait 99.0% idle
Mem: 117912k av, 116684k used, 1228k free,
0k shrd, 1660k buff

                     65128k actv,    4760k in_d,
1644k in_c
Swap:  522072k av,   40556k used,  481516k free
           32240k cached

PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM
TIME CPU COMMAND
3598 root 15 0 139M 5316 872 R 0.7 4.5
0:18 0 X
3790 ankit 15 0 1048 1048 848 R 0.1 0.8
0:00 0 top

    1 root      15   0    88   60    40 S     0.0  0.0
  0:03   0 init
    2 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 keventd
    3 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kapmd
    4 root      35  19     0    0     0 SWN   0.0  0.0
  0:00   0 ksoftirqd_CPU0
    9 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 bdflush
    5 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kswapd
    6 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/DMA
    7 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/Normal
    8 root      15   0     0    0     0 SW    0.0  0.0

0:00 0 kscand/HighMem
10 root 15 0 0 0 0 SW 0.0 0.0
0:00 0 kupdated
11 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 mdrecoveryd
110 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 khubd
3180 root 15 0 188 156 112 S 0.0 0.1
0:00 0 syslogd
3184 root 15 0 56 4 0 S 0.0 0.0
0:00 0 klogd
3202 rpc 15 0 72 0 0 SW 0.0 0.0
0:00 0 portmap
3221 rpcuser 25 0 76 0 0 SW 0.0 0.0
0:00 0 rpc.statd
3288 root 24 0 52 4 0 S 0.0 0.0
0:00 0 apmd
3325 root 25 0 240 4 0 S 0.0 0.0
0:00 0 sshd

Quoted 18 lines

if u will calculate this it will show very less
compared to qhat it displays. becaz it displays
only1.5 Mb to be free

thanks

ankit

Quoted 11 lines

Is it to increase available RAM by 'tuning' your system,
rather than by installing more RAM memory?
I think that 'top' will display running programs and sort them by the memory they consume
(or try to comsume).
What programs or services are installed in your setup
and how much memory are they consuming?
You probably need look no futher than the 'top ten'.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#12 lore raw
In reply to Ankit Jain

Am 2004-10-05 06:01:00, schrieb Ankit Jain:

Quoted 3 lines

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

What is Linux 9.0 ???

Linux = Kernel = 2.4/2.6

9.0 = SuSE, RedHat, Mandrake ???

Quoted 5 lines

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i

This is normaly, because Linux use the Memory very efficient.

Quoted 3 lines

oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

No, because this will slow down Linux.

Quoted 3 lines

thanks

Ankit

#13 lore raw
In reply to Ankit Jain
Quoted 13 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

Quoted 7 lines

thanks

Ankit

________________________________________________________________________

Hi, Ankit:

In my humble opinion:
There is no 'linux 9.0'; perhaps you mean
Red Hat 9.0
Mandrake 9.0
Suse 9.0
Slackware 9.0
Debian 9.0
...
The memory is not 'lost', it has only been used sometime and will be reallocated if it is needed by another application. Have you noticed any errors or warnings about 'low memory' or 'out of memory' ? I am guessing that you had not had anything fail due to 'memory lost'.
...
'how to reduce this load'

Use a window manager that requires less resources. What window manager are you using now?
Gnome, KDE, FVWM[2,95],xfce,icebox,twm,...?
...
Yes, xserver, GUI, graphics,... all use very much memory.
...
;-) Do not use GUI environment. ;-)

HTH, Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#14 lore raw
In reply to Ankit Jain
Quoted 17 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb RAM

i have seen not only on this sytem but the other one having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around 90% is occupied by the xsever and on the sys with 512 Mb RAM around 70% is occupied. how to reduce this load. i oculd not get any article or stuff relate to this . if we can do something in kernel or in some way reduce this load while working in GUI envt

thanks

Ankit

Quoted 10 lines

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Can you post the following

The output of the free command

# free

As well as the top 10 or so processes copied from top?

Run top

# top

Then hit M (capital M) to sort by memory,

Then past the results to the email.. It is a lot easier to know what is going on if everyone can see the actual memory information.

For example

$ free
            total       used       free     shared    buffers     cached
Mem:       1550128    1515028      35100          0     160944     801932
-/+ buffers/cache:     552152     997976
Swap:      2449904      19928    2429976

Output of top, sorted by memory.

19725 tmartin 15 0 145M 145M 26196 S 2.7 9.5 20:17 0 mozilla-bin
9925 root 15 0 135M 66M 8472 S 3.5 4.3 270:54 0 X

17665 tmartin   15   0 20912  20M 16488 S     0.0  1.3   0:00   0 kdeinit
17632 tmartin   15   0 17260  16M 14352 S     0.1  1.1   2:40   0 kdeinit
17659 tmartin   15   0 15332  14M 12684 S     0.0  0.9   0:07   0 kdeinit
17657 tmartin   15   0 14916  14M 12564 S     0.0  0.9   0:00   0 kdeinit
23837 tmartin   15   0 14860  14M 12676 S     0.0  0.9   0:00   0 kdeinit
19561 tmartin   15   0 14792  14M 12584 S     0.0  0.9   0:00   0 kdeinit
19638 tmartin   15   0 14652  14M 12560 S     0.0  0.9   0:00   0 kdeinit
17630 tmartin   15   0 14568  14M 12748 S     0.0  0.9   0:02   0 kdeinit

In my case I am in good shape. I am not using much swap, X is using 133MB of RAM but only 66MB are actually resident. That is there is only 66MB in physical memory, even though the memory size is 135MB. Mozilla on the other hand has asked for 145MB of RAM and it is using all of it.

One way to reduce the Xwindows RAM footprint a bit is to run a much smaller window manager. For example instead of the heavier Gnome or KDE run XFCE.

The current version of Fedora Redhat supports this I believe.

Terrence

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#15 lore raw

well i hope this will give u a idea about my sys
current status

thanks
[ankit@Ankit ankit]$ free
total used free shared
buffers cached
Mem: 117912 116700 1212 0
1068 28472
-/+ buffers/cache: 87160 30752
Swap: 522072 41440 480632
[ankit@Ankit ankit]$ top

10:35:20 up 17 min, 2 users, load average: 0.03,
0.14, 0.16
60 processes: 57 sleeping, 3 running, 0 zombie, 0 stopped
CPU states: 1.3% user 0.0% system 0.0% nice
0.0% iowait 98.6% idle
Mem: 117912k av, 116000k used, 1912k free,
0k shrd, 1100k buff

                     64652k actv,       0k in_d,   
1084k in_c
Swap:  522072k av,   43448k used,  478624k free       
           28232k cached

PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM
TIME CPU COMMAND
3587 root 15 0 140M 6132 1056 R 0.8 5.2
0:22 0 X
3783 ankit 15 0 1052 1052 852 R 0.4 0.8
0:00 0 top

    1 root      15   0    88   60    40 S     0.0  0.0
  0:03   0 init
    2 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 keventd
    3 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kapmd
    4 root      34  19     0    0     0 SWN   0.0  0.0
  0:00   0 ksoftirqd_CPU0
    9 root      25   0     0    0     0 SW    0.0  0.0
  0:00   0 bdflush
    5 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kswapd
    6 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/DMA
    7 root      15   0     0    0     0 SW    0.0  0.0
  0:00   0 kscand/Normal
    8 root      15   0     0    0     0 SW    0.0  0.0

0:00 0 kscand/HighMem
10 root 15 0 0 0 0 SW 0.0 0.0
0:00 0 kupdated
11 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 mdrecoveryd
110 root 25 0 0 0 0 SW 0.0 0.0
0:00 0 khubd
3169 root 15 0 172 120 100 S 0.0 0.1
0:00 0 syslogd
3173 root 15 0 52 4 0 S 0.0 0.0
0:00 0 klogd
3191 rpc 15 0 76 0 0 SW 0.0 0.0
0:00 0 portmap
3210 rpcuser 25 0 80 0 0 SW 0.0 0.0
0:00 0 rpc.statd
3277 root 24 0 52 4 0 S 0.0 0.0
0:00 0 apmd
3315 root 25 0 244 4 0 S 0.0 0.0
0:00 0 sshd

Quoted 114 lines · --- Terrence Martin
Quoted 3 lines · Ankit Jain

hi

well i am using linux 9.0 kernel 2.4 ver. 128 Mb

RAM

Quoted 2 lines

i have seen not only on this sytem but the other

one

Quoted 2 lines

having 512 Mb RAM the most of the memory is lost or taken by graphics or xserver. on my system around

90%

Quoted 1 line

is occupied by the xsever and on the sys with 512

Mb

Quoted 1 line

RAM around 70% is occupied. how to reduce this

load. i

Quoted 1 line

oculd not get any article or stuff relate to this .

if

Quoted 7 lines

we can do something in kernel or in some way reduce this load while working in GUI envt

thanks

Ankit

________________________________________________________________________

Quoted 5 lines

Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line

"unsubscribe linux-kernel" in

Quoted 2 lines

the body of a message to [email protected] More majordomo info at

http://vger.kernel.org/majordomo-info.html

Quoted 4 lines

Please read the FAQ at http://www.tux.org/lkml/

Can you post the following

The output of the free command

# free

As well as the top 10 or so processes copied from
top?

Run top

# top

Then hit M (capital M) to sort by memory,

Then past the results to the email.. It is a lot
easier to know what is
going on if everyone can see the actual memory
information.

For example

$ free
             total       used       free     shared 
  buffers     cached
Mem:       1550128    1515028      35100          0 
   160944     801932
-/+ buffers/cache:     552152     997976
Swap:      2449904      19928    2429976

Output of top, sorted by memory.

19725 tmartin 15 0 145M 145M 26196 S 2.7
9.5 20:17 0
mozilla-bin
9925 root 15 0 135M 66M 8472 S 3.5
4.3 270:54 0 X
17665 tmartin 15 0 20912 20M 16488 S 0.0
1.3 0:00 0 kdeinit
17632 tmartin 15 0 17260 16M 14352 S 0.1
1.1 2:40 0 kdeinit
17659 tmartin 15 0 15332 14M 12684 S 0.0
0.9 0:07 0 kdeinit
17657 tmartin 15 0 14916 14M 12564 S 0.0
0.9 0:00 0 kdeinit
23837 tmartin 15 0 14860 14M 12676 S 0.0
0.9 0:00 0 kdeinit
19561 tmartin 15 0 14792 14M 12584 S 0.0
0.9 0:00 0 kdeinit
19638 tmartin 15 0 14652 14M 12560 S 0.0
0.9 0:00 0 kdeinit
17630 tmartin 15 0 14568 14M 12748 S 0.0
0.9 0:02 0 kdeinit

In my case I am in good shape. I am not using much swap, X is using
133MB of RAM but only 66MB are actually resident. That is there is only
66MB in physical memory, even though the memory size is 135MB. Mozilla
on the other hand has asked for 145MB of RAM and it is using all of it.

One way to reduce the Xwindows RAM footprint a bit is to run a much
smaller window manager. For example instead of the heavier Gnome or KDE
run XFCE.

The current version of Fedora Redhat supports this I believe.

Terrence

Quoted 9 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.linux-learn.org/faqs

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#16 lore raw
Quoted 6 lines · Ankit Jain

well i hope this will give u a idea about my sys
current status

thanks

i had never got memory lost kinda messages but aftger

some hours of working my system gets damn slow and even mozilla never opens on it. when i start mozilla it shows in panel starting mozilla and after a min nothing opens.

thanks

ankit

It might be helpful if we saw the data of 'free' and 'top' after it gets "slow and mozilla never opens on it".

Leave 'top' running on a virtual console and switch to it when the systems gets slow. Try toggling the display with the 'i' switch. Press a lower case 'i' and top will toggle between showing 'idle' processes and not showing them.

In the data capture you shared, it is showing only 41 MB of swap being (ever) used. Perhaps viewing this data while mozilla is running would be more meaningful.

HTH, Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#17 lore raw
In reply to Ankit Jain

Want to free memory?

$ free
             total       used       free     shared    buffers     cached
Mem:        223708     220120       3588          0      28356     107936
-/+ buffers/cache:      83828     139880
Swap:       128480       3996     124484
$ locate /usr/bin/f* or x* or g* ...
$ free
             total       used       free     shared    buffers     cached
Mem:        223708      41364     182344          0       1520      28592
-/+ buffers/cache:      11252     212456
Swap:       128480       5056     123424
Signature · 7 lines
Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#18 lore raw
Quoted 8 lines · Peter

Want to free memory?

$ free
             total       used       free     shared    buffers     cached
Mem:        223708     220120       3588          0      28356     107936
-/+ buffers/cache:      83828     139880
Swap:       128480       3996     124484
Quoted 8 lines
$ locate /usr/bin/f* or x* or g* ...
$ free
             total       used       free     shared    buffers     cached
Mem:        223708      41364     182344          0       1520      28592
-/+ buffers/cache:      11252     212456
Swap:       128480       5056     123424

Peter -- This is a pretty strange consequence of running the "locate" command. And I cannot replicate it here. For example:

ray@waverly:~$ free
             total       used       free     shared    buffers     cached
Mem:        773892     742056      31836          0      87600     441912
-/+ buffers/cache:     212544     561348
Swap:            0          0          0
ray@waverly:~$ locate /usr/bin/f*
/usr/bin/factor
[about 40 more lines, deleted here]
ray@waverly:~$ free
             total       used       free     shared    buffers     cached
Mem:        773892     742076      31816          0      87608     441924
-/+ buffers/cache:     212544     561348
Swap:            0          0          0

Any idea what's causing the change on your system? My understanding of Linux says it shouldn't work the way you report seeing it, so I'm wondering what I am missing.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#19 lore raw
Quoted 35 lines · Ray Olszewski
Quoted 8 lines · Peter

Want to free memory?

$ free
             total       used       free     shared    buffers     cached
Mem:        223708     220120       3588          0      28356     107936
-/+ buffers/cache:      83828     139880
Swap:       128480       3996     124484
Quoted 8 lines
$ locate /usr/bin/f* or x* or g* ...
$ free
             total       used       free     shared    buffers     cached
Mem:        223708      41364     182344          0       1520      28592
-/+ buffers/cache:      11252     212456
Swap:       128480       5056     123424

Peter -- This is a pretty strange consequence of running the "locate" command. And I cannot replicate it here. For example:

ray@waverly:~$ free
              total       used       free     shared    buffers     cached
Mem:        773892     742056      31836          0      87600     441912
-/+ buffers/cache:     212544     561348
Swap:            0          0          0
ray@waverly:~$ locate /usr/bin/f*
/usr/bin/factor
[about 40 more lines, deleted here]
ray@waverly:~$ free
              total       used       free     shared    buffers     cached
Mem:        773892     742076      31816          0      87608     441924
-/+ buffers/cache:     212544     561348
Swap:            0          0          0
Quoted 3 lines

Any idea what's causing the change on your system? My understanding of Linux says it shouldn't work the way you report seeing it, so I'm wondering what I am missing.

It's not really anything to do with locate. You create an enormous amount of memory pressure that won't be needed but the once. This causes tho VM to dump most of what is in RAM to swap or just free the pages.

I believe that is the LRU algorithm doing its job :)

In my case most of my applications were dumped to swap. X was still snappy but almost everything else was massively sluggish and locate ate all available memory plus a big chunk of swap.

spider ~ # free
total used free shared buffers cached
Mem: 1034704 1023732 10972 0 53008 334368
-/+ buffers/cache: 636356 398348
Swap: 2048248 25464 2022784
spider ~ # locate /usr/bin/g*
<snip>
spider ~ # free
total used free shared buffers cached
Mem: 1034704 132848 901856 0 652 36024
-/+ buffers/cache: 96172 938532
Swap: 2048248 252972 1795276
spider ~ #

Signature · 4 lines
Owen Ford <[email protected]>

()  ascii ribbon campaign - against html e-mail 
/\                        - against proprietary attachments
author
#20 lore raw
In reply to Peter

what is this doing

thanks

ankit

Quoted 13 lines · --- Peter

Want to free memory?

$ free
             total       used       free     shared 
  buffers     cached
Mem:        223708     220120       3588          0 
    28356     107936
-/+ buffers/cache:      83828     139880
Swap:       128480       3996     124484
$ locate /usr/bin/f* or x* or g* ...
Quoted 21 lines
$ free
             total       used       free     shared 
  buffers     cached
Mem:        223708      41364     182344          0 
     1520      28592
-/+ buffers/cache:      11252     212456
Swap:       128480       5056     123424
Signature · 10 lines
Peter

-
To unsubscribe from this list: send the line
"unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at 
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at
http://www.linux-learn.org/faqs

________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs