board/board/flash.c
Hello All,
If we only have Nand flash on our board, does board/ourboard/flash.c really have to be implemented?
Shouldn't it be sufficient to just use cmd_nand.c and env_nand.c?
For our configuration, U-Boot will actually come up and running from SDRAM itself as we will be using a Primary Bootloader to load U-Boot from Nand Flash. So the only functionality that we should really need is reading and writing to nand flash for writing downloaded images and booting kernels.
Regards,
Signature · 2 lines
Bradley Remedios bremedios at gmail.com
Quoted 3 lines · In message <[email protected]> you wrote:
If we only have Nand flash on our board, does
board/ourboard/flash.creally have to be implemented?
What for then?
Quoted 5 lines
For our configuration, U-Boot will actually come up and running from SDRAM itself as we will be using a Primary Bootloader to load U-Boot from Nand Flash. So the only functionality that we should really need is reading and writing to nand flash for writing downloaded images and booting kernels.
You answered your own question.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Question: How does one get fresh air into a Russian church? Answer: One clicks on an icon, and a window opens!