s390 (9/12): z/VM watchdog timer.
Subsystems (2)
PATCH 1/1 s390 (9/12): z/VM watchdog timer.
[PATCH] s390: z/VM watchdog timer.
From: Arnd Bergmann <[email protected]>
Add support for z/VM watchdog timer.
Signed-off-by Martin Schwidefsky <[email protected]>
diffstat:
arch/s390/defconfig | 5 drivers/char/watchdog/Kconfig | 14 + drivers/s390/Kconfig | 2 drivers/s390/char/Makefile | 2 drivers/s390/char/vmwatchdog.c | 296 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 319 insertions(+)
arch/s390/defconfig +5 -0
@@ -192,6 +192,11 @@ CONFIG_UNIX98_PTY_COUNT=2048 # +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set + +# # S/390 character device drivers # CONFIG_TN3270=y
drivers/char/watchdog/Kconfig +14 -0
@@ -336,6 +336,20 @@ timer expired and no process has written to /dev/watchdog during that time. +# S390 Architecture + +config ZVM_WATCHDOG + tristate "z/VM Watchdog Timer" + depends on WATCHDOG && ARCH_S390 + help + IBM s/390 and zSeries machines running under z/VM 5.1 or later + provide a virtual watchdog timer to their guest that cause a + user define Control Program command to be executed after a + timeout. + + To compile this driver as a module, choose M here. The module + will be called vmwatchdog. + # SUPERH Architecture config SH_WDT
drivers/s390/char/Makefile +2 -0
@@ -17,6 +17,8 @@ obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o obj-$(CONFIG_SCLP_CPI) += sclp_cpi.o +obj-$(CONFIG_ZVM_WATCHDOG) += vmwatchdog.o + tape-$(CONFIG_S390_TAPE_BLOCK) += tape_block.o tape-$(CONFIG_PROC_FS) += tape_proc.o tape-objs := tape_core.o tape_std.o tape_char.o $(tape-y)
drivers/s390/char/vmwatchdog.c +296 -0
296 lines not on this page · raw message
drivers/s390/Kconfig +2 -0
@@ -51,6 +51,8 @@ When not in use, each additional set of 256 PTYs occupy approximately 8 KB of kernel memory on 32-bit architectures. +source "drivers/char/watchdog/Kconfig" + comment "S/390 character device drivers" config TN3270