s390 (11/12): crypto device driver.
Subsystems (2)
PATCH 1/1 s390 (11/12): crypto device driver.
[PATCH] s390: crypto device driver.
From: Eric Rossman <[email protected]>
crypto driver changes:
- Add support for zero-pad and crypto express II (CEX2C).
Signed-off-by Martin Schwidefsky <[email protected]>
diffstat:
drivers/s390/crypto/z90common.h | 69 +++- drivers/s390/crypto/z90crypt.h | 73 ++-- drivers/s390/crypto/z90hardware.c | 285 ++++++++++------ drivers/s390/crypto/z90main.c | 653 +++++++++++++++++++++++++++----------- 4 files changed, 756 insertions(+), 324 deletions(-)
drivers/s390/crypto/z90common.h +54 -15
@@ -1,11 +1,11 @@/* * linux/drivers/s390/misc/z90common.h * -* z90crypt 1.3.1 +* z90crypt 1.3.2 * * Copyright (C) 2001, 2004 IBM Corporation * Author(s): Robert Burroughs ([email protected]) -* Eric Rossman ([email protected]) +* Eric Rossman ([email protected]) * * Hotplug & misc device support: Jochen Roehrig ([email protected]) *
@@ -16,7 +16,7 @@* * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License
@@ -27,12 +27,13 @@#ifndef _Z90COMMON_#define _Z90COMMON_ -#define VERSION_Z90COMMON_H "$Revision: 1.8 $" +#define VERSION_Z90COMMON_H "$Revision: 1.15 $"#define RESPBUFFSIZE 256#define PCI_FUNC_KEY_DECRYPT 0x5044#define PCI_FUNC_KEY_ENCRYPT 0x504B +extern int ext_bitlens;enum devstat { DEV_GONE,
@@ -56,6 +57,7 @@ HD_TSQ_EXCEPTION }; +#define Z90C_NO_DEVICES 1#define Z90C_AMBIGUOUS_DOMAIN 2#define Z90C_INCORRECT_DOMAIN 3#define ENOTINIT 4
@@ -74,13 +76,13 @@#define REC_OPERAND_SIZE 9#define REC_EVEN_MOD 10#define REC_NO_WORK 11 -#define REC_HARDWAR_ERR 12 -#define REC_NO_RESPONSE 13 +#define REC_HARDWAR_ERR 12 +#define REC_NO_RESPONSE 13#define REC_RETRY_DEV 14#define REC_USER_GONE 15 -#define REC_BAD_MESSAGE 16 -#define REC_INVALID_PAD 17 -#define REC_RELEASED 28 +#define REC_BAD_MESSAGE 16 +#define REC_INVALID_PAD 17 +#define REC_USE_PCICA 18#define WRONG_DEVICE_TYPE 20
@@ -89,18 +91,55 @@#define TSQ_FATAL_ERROR 34#define RSQ_FATAL_ERROR 35 -#define PCICA 0 -#define PCICC 1 -#define PCIXCC 2 -#define NILDEV -1 -#define ANYDEV -1 +#define Z90CRYPT_NUM_TYPES 5 +#define PCICA 0 +#define PCICC 1 +#define PCIXCC_MCL2 2 +#define PCIXCC_MCL3 3 +#define CEX2C 4 +#define NILDEV -1 +#define ANYDEV -1 +#define PCIXCC_UNK -2enum hdevice_type {PCICC_HW =3 ,PCICA_HW =4 ,PCIXCC_HW =5 ,OTHER_HW =6 , -OTHER2_HW =7 +CEX2C_HW =7 +}; + +struct CPRBX { +unsigned short cprb_len; +unsigned char cprb_ver_id; +unsigned char pad_000[3 ]; +unsigned char func_id[2 ]; +unsigned char cprb_flags[4 ]; +unsigned int req_parml; +unsigned int req_datal; +unsigned int rpl_msgbl; +unsigned int rpld_parml; +unsigned int rpl_datal; +unsigned int rpld_datal; +unsigned int req_extbl; +unsigned char pad_001[4 ]; +unsigned int rpld_extbl; +unsigned char req_parmb[16 ]; +unsigned char req_datab[16 ]; +unsigned char rpl_parmb[16 ]; +unsigned char rpl_datab[16 ]; +unsigned char req_extb[16 ]; +unsigned char rpl_extb[16 ]; +unsigned short ccp_rtcode; +unsigned short ccp_rscode; +unsigned int mac_data_len; +unsigned char logon_id[8 ]; +unsigned char mac_value[8 ]; +unsigned char mac_content_flgs; +unsigned char pad_002; +unsigned short domain; +unsigned char pad_003[12 ]; +unsigned char pad_004[36 ]; };#ifndef DEV_NAME
drivers/s390/crypto/z90crypt.h +50 -23
161 lines not on this page · raw message
drivers/s390/crypto/z90hardware.c +172 -113
611 lines not on this page · raw message
drivers/s390/crypto/z90main.c +480 -173
1,186 lines not on this page · raw message