Skip to contentSkip to conversation

alsa-driver-1.0.6a unresolved symbol

DISCUSSION Mario Loritz 3 participants 5 messages Oct 9, 2004 – Oct 15, 2004

lore
Share & tools
lore
#0 lore raw

Hello everyone,

On my system, alsa-driver-1.0.6a and alsa-lib-1.0.6 compile and install fine, but when the soung server is restarted (by rcalsasound restart) the new compiled driver cant be loaded.

Error message:

Shutting down sound driver: done
Starting sound driver: snd-intel8x0 /lib/modules/2.4.21-243-athlon/kernel/ sound/acore/snd.o: unresolved symbol snd_compat_strlcpy_Rb4409a1e /lib/modules/2.4.21-243-athlon/kernel/sound/acore/snd.o: insmod /lib/ modules/2.4.21-243-athlon/kernel/sound/acore/snd.o failed /lib/modules/2.4.21-243-athlon/kernel/sound/acore/snd.o: insmod snd-intel8x0 failed
done

I think I've seen this error before in an earlier version of alsa. There, it could be fixed...

Greetings,
Mario Loritz

System Information:
SuSE-Linux 9.0 kernel 2.4.21-243-athlon
Realtek ALC850
Athlon64, nforce3 250Gb Chipset

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#1 lore raw
Quoted 2 lines · On Sat, 9 Oct 2004 11:13:32 +0200 Mario Loritz <[email protected]> wrote:

I think I've seen this error before in an earlier version of alsa. There, it could be fixed...

I don't think this is an alsa error. This is rather a module build error. Make sure your kernel source tree is in a suitable state for building modules against it.

flo

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#2 lore raw

Am Samstag, 9. Oktober 2004 14:59 schrieb Florian Schmidt:

Quoted 11 lines

On Sat, 9 Oct 2004 11:13:32 +0200

Quoted 2 lines · Mario Loritz

I think I've seen this error before in an earlier version of alsa. There, it could be fixed...

I don't think this is an alsa error. This is rather a module build error. Make sure your kernel source tree is in a suitable state for building modules against it.

flo

Could you, in short words, explain why alsa-1.0.5 compiles just fine and alsa-1.0.6 doesn't?
And yes, the last time I observed this error it was gone with a new alsa release.

Greetings
Mario Loritz

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#3 lore raw
Quoted 7 lines · Mario Loritz

Am Samstag, 9. Oktober 2004 14:59 schrieb Florian Schmidt:

Quoted 3 lines

I don't think this is an alsa error. This is rather a module build error. Make sure your kernel source tree is in a suitable state for building modules against it.

Could you, in short words, explain why alsa-1.0.5 compiles just fine and alsa-1.0.6 doesn't?

In 1.0.6, I moved snd_compat_strlcpy() to another module.

It may be possible that you didn't reload the snd-page-alloc module (usually this is _not_ done by the alsa script).

HTH
Clemens

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#4 lore raw

Re: alsa-driver-1.0.6a unresolved symbol [SOLVED]

Am Montag, 11. Oktober 2004 13:58 schrieb Clemens Ladisch:

Quoted 8 lines

In 1.0.6, I moved snd_compat_strlcpy() to another module.

It may be possible that you didn't reload the snd-page-alloc module (usually this is _not_ done by the alsa script).

HTH
Clemens

It was exactly that problem. Thank you!

Greetings,
Mario

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl