NAT+mangle+tc
Hi All,
I wonder can I do NAT+mangle+tc on same maschine? I want to shape
outgoing traffic per IP on my gateway computer.
Regards
Emil Terziev
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · emo terziev
Hi All,
I wonder can I do NAT+mangle+tc on same maschine? I want to shape
outgoing traffic per IP on my gateway computer.
Sure, you can do that on the same machine.
You can do NAT with a variety of scripts or just hand written iptables rules. Personally, I use the gShield iptables firewall. As for tc, you might look into the LARTC HOWTO.
Signature · 8 lines
Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi , Jason
I know LARTC HOWTO. mi download shapers work fine, but
I don't know can i limit upload when i have NAT because source IP address is changed
and i cannot make u32 src filter.
in other hand package marking isn't usable in my case because i want
user A to have for example 128K to Group A networks and 64K to group B
user B to have 256k to group A and 1Mbit to group B
download is easy, but for upload i unfortunatly don't know how should to be :(
,This is over my knowlage i think.
Please anyone with more experience just to give mi idea how can be done.
+-----------+ | S |
| User A |---+ W | +NAT
+----------+ | I | eth1 eth0 group A
+----------+ | T | +--------+ +--- 180 diferent
Networks -----------------+
| User B |----+ C +-----| Router |--------|
Internet
+----------+ | H | +--------+ +---all rest
internet ---------------------------+
.... ... / ...
group B
+----------+ | H |
| User N |---+ U |
+-----------+ | B | ---------------->
+-----+Best Regards
emo terziev
Quoted 15 lines · Jason Boxman
Quoted 3 lines · emo terziev
Hi All,
I wonder can I do NAT+mangle+tc on same maschine? I want to shape
outgoing traffic per IP on my gateway computer.Sure, you can do that on the same machine.
You can do NAT with a variety of scripts or just hand written iptables rules. Personally, I use the gShield iptables firewall. As for
tc, you might look into the LARTC HOWTO.--
Quoted 9 lines
Jason Boxman
Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida
http://edseek.com/ - Linux and FOSS stuff_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
What you can do is mark the packets in netfilter (iptables) and then use the marks to assign the packets to classes
you can do something like
iptables -t mangle -A PREROUTING -s AddrIWantToShape -j mark 0x02 iptables -t mangle -A PREROUTING -s AddrIWantToShape2 -j mark 0x03
iptables -t nat -A POSTROUTING -s AddrIWantToShape -o InternetInt -j MASQ iptables -t nat -A POSTROUTING -s AddrIWantToShape2 -o InternetInt -j MASQ
tc filter add dev InternetInt parent 1: protocol ip pref 5 handle 2 fw flowid 1:30 tc filter add dev InternetInt parent 1: protocol ip pref 5 handle 3 fw flowid 1:40
Something like that
Alex
Quoted 66 lines · emo terziev
Hi , Jason
I know LARTC HOWTO. mi download shapers work fine, but
I don't know can i limit upload when i have NAT because source IP address is changed
and i cannot make u32 src filter.in other hand package marking isn't usable in my case because i want
user A to have for example 128K to Group A networks and 64K to group B
user B to have 256k to group A and 1Mbit to group Bdownload is easy, but for upload i unfortunatly don't know how should to be :(
,This is over my knowlage i think.Please anyone with more experience just to give mi idea how can be done.
+-----------+ | S | | User A |---+ W | +NAT +----------+ | I | eth1 eth0 group A +----------+ | T | +--------+ +--- 180 diferent Networks -----------------+ | User B |----+ C +-----| Router |--------| Internet +----------+ | H | +--------+ +---all rest internet ---------------------------+ .... ... / ... group B +----------+ | H | | User N |---+ U | +-----------+ | B | ----------------> +-----+Best Regards
emo terzievQuoted 15 lines · Jason Boxman
Quoted 3 lines · emo terziev
Hi All,
I wonder can I do NAT+mangle+tc on same maschine? I want to shape
outgoing traffic per IP on my gateway computer.Sure, you can do that on the same machine.
You can do NAT with a variety of scripts or just hand written iptables rules. Personally, I use the gShield iptables firewall. As for
tc, you might look into the LARTC HOWTO.--
Quoted 9 lines
Jason Boxman
Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida
http://edseek.com/ - Linux and FOSS stuff_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · On Tue, 12 Oct 2004 07:04:17 +1000 Alexander Samad <[email protected]> wrote:
you can do something like
iptables -t mangle -A PREROUTING -s AddrIWantToShape -j mark
0x02iptables -t mangle -A PREROUTING -s AddrIWantToShape2 -j mark0x03
-- SNIP --
Quoted 4 lines
tc filter add dev InternetInt parent 1: protocol ip pref 5 handle 2 fw flowid 1:30 tc filter add dev InternetInt parent 1: protocol ip pref 5 handle 3 fw flowid 1:40
Hi All.
I am also fighting this for some time now. And I got:
(icmp incoming thru eth1 should be put into output eth2 flow 1:1) iptables -t mangle -A PREROUTING -i eth1 -p icmp -j MARK --set-mark 1 tc filter add dev eth2 protocol ip parent 1: pref 1 handle 1 fw flowid 1:1
RTNETLINK answers: Invalid argument
Linux Slackware 8.1
iptables v1.2.6a
Kernel 2.4.20-pre10 with
<*> Firewall based classifier
tc downloaded from docum.org
The funny thing is that the line bellow do not give me any errors:
tc filter add dev $INTERNET protocol ip \
parent 1:0 prio 1 u32 \
match ip src X.Y.W.Z/29 \
flowid 1:FFFEIt is another classifier I know. But what am I doing wrong?
Signature · 7 lines
Ethy H. Brito /"\ InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML +55 (12) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL S.J.Campos - Brasil / \ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/