Difference in priority
hi
if somebody knows the difference b/w /PRI of both these commands because both give different results
ps -Al
&
top
as per priority rule we can set priority upto 0-99
but top never shows this high priority
thanks
ankit
________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
Quoted 11 lines · Ankit Jain
hi
if somebody knows the difference b/w /PRI of both these commands because both give different results
ps -Al
& topas per priority rule we can set priority upto 0-99
but top never shows this high priority
Priority values 0-99 are real time ones and 100-139 are normal scheduling ones. RT scheduling does not change dynamic priority while running wheras normal scheduling does (between 100-139). top shows the value of the current dynamic priority in the PRI column as the current dynamic priority-100. If you have a real time task in top it shows as a -ve value. ps -Al seems to show the current dynamic priority+60.
Con
Quoted 10 lines · Con Kolivas
Quoted 8 lines · Ankit Jain
hi
if somebody knows the difference b/w /PRI of both these commands because both give different results
ps -Al
& top
Quoted 6 lines
Quoted 2 lines
as per priority rule we can set priority upto 0-99 but top never shows this high priority
Priority values 0-99 are real time ones and 100-139 are normal scheduling ones. RT scheduling does not change dynamic priority while running wheras normal scheduling does (between 100-139). top shows the value of the current dynamic priority in the PRI column as the current dynamic priority-100. If you have a real time task in top it shows as a -ve value. ps -Al seems to show the current dynamic priority+60.
That should read dynamic priority-60 in the PRI column.
Cheers,
Con
Sorry but iu could not get why are you adding and subtracting this 60 in priorities. that corelation i had also got but could not understrand whats this 60? and also what is this dynamic priority? hows different from normal priority
thanks
ankit
Quoted 27 lines · --- Con Kolivas
Quoted 6 lines · Con Kolivas
Quoted 4 lines · Ankit Jain
hi
if somebody knows the difference b/w /PRI of both
these commands because both give differentresults
Quoted 5 lines
Quoted 5 lines
ps -Al
& topas per priority rule we can set priority upto
0-99
Quoted 4 lines
Quoted 1 line
but top never shows this high priority
Priority values 0-99 are real time ones and
100-139 are normal
Quoted 1 line
scheduling ones. RT scheduling does not change
dynamic priority while
Quoted 1 line
running wheras normal scheduling does (between
100-139). top shows the
Quoted 1 line
value of the current dynamic priority in the PRI
column as the current
Quoted 1 line
dynamic priority-100. If you have a real time task
in top it shows as a
Quoted 9 lines
Quoted 1 line
-ve value. ps -Al seems to show the current
dynamic priority+60.
That should read dynamic priority-60 in the PRI
column.Cheers,
Con
________________________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html
Quoted 5 lines · Ankit Jain
Sorry but iu could not get why are you adding and subtracting this 60 in priorities. that corelation i had also got but could not understrand whats this 60? and also what is this dynamic priority? hows different from normal priority
Dynamic priority is the current priority the scheduler has allocated to a task. It uses it to decide which task to go next; the lower the number the better it's priority so it goes first. The subtracting 100 and 60 is just what the userspace tools do to represent an obviously complicated value.
Please don't top post. It makes it hard to respond appropriately and follow email threads.
Cheers,
Con
Quoted 54 lines
thanks
ankit
Quoted 48 lines · --- Con Kolivas
Quoted 7 lines · Con Kolivas
Quoted 4 lines · Ankit Jain
hi
if somebody knows the difference b/w /PRI of both
these commands because both give differentresults
Quoted 4 lines
Quoted 4 lines
ps -Al
& topas per priority rule we can set priority upto
0-99
Quoted 4 lines
Quoted 1 line
but top never shows this high priority
Priority values 0-99 are real time ones and
100-139 are normal
Quoted 1 line
scheduling ones. RT scheduling does not change
dynamic priority while
Quoted 1 line
running wheras normal scheduling does (between
100-139). top shows the
Quoted 1 line
value of the current dynamic priority in the PRI
column as the current
Quoted 1 line
dynamic priority-100. If you have a real time task
in top it shows as a
Quoted 1 line
-ve value. ps -Al seems to show the current
dynamic priority+60.
That should read dynamic priority-60 in the PRI
column.