Skip to contentSkip to conversation

: multi+route distort sound

ALSA - driver 0000579 [email protected] 1 participant 1 message Oct 11, 2004

lore
Share & tools
lore
#0 lore raw

The following bug has been SUBMITTED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000579
======================================================================
Reported By: ramendik
Assigned To:
======================================================================

Project:                    ALSA - driver
Bug ID:                     579
Category:                   CORE - pcm
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               ASP Linux, RH9-based
Kernel Version:             2.6.8.1-ck8 , with alsa 1.0.7rc1 stuck in and patches from bug 505 put on top
======================================================================
Date Submitted:             10-11-2004 20:45 CEST
Last Modified:              10-11-2004 20:45 CEST

======================================================================
Summary: multi+route distort sound
Description:
I have Intel ICH5, with both analog and spdif output.

I have made up /etc/asound.conf to route to both hw:0,0 and hw:0,4; I am listening on spdif (hw:0,4). (tiwai: I will try the new patch that may make this redundant, but what we have here seems to be another bug and might happen in other cases too).

Here's my /etc/asound.conf in its entirety:

pcm.analog {
type hw
card 0
device 0
}

pcm.digit {
type hw
card 0
device 4
}

pcm.whole {
    type multi
    slaves.a.pcm "hw:0,0"
    slaves.a.channels 2
    slaves.b.pcm "hw:0,4"
    slaves.b.channels 2
    bindings.0.slave a
    bindings.0.channel 0
    bindings.1.slave a
    bindings.1.channel 1
    bindings.2.slave b
    bindings.2.channel 0
    bindings.3.slave b
    bindings.3.channel 1
}
pcm.rt {
    type route
    slave.pcm whole
    slave.channels 4
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 1
    ttable.1.3 1
}

pcm.!default {
type copy
slave.pcm rt
}

ctl.!default {
type hw
card 0
}

When I play to hw:0,4 or "analog", the sound is OK. When I play to "rt", it is distorted. Not noisy this time; instead, the pitch is shifted somewhat lower.

Checked with alsaplayer and xmms 1.2.10 . (XMMS 1.2.8 also caused high CPU use when playing to "rt", but this may be a CPU bug). Checked with both 44100 Hz and 48000 Hz files.

This may have something to do with a strange fact. When I play a 48k file, iecset still reports a rate of 44100 Hz. And in fact, if I set it to 48000 Hz manualy and start a 48k file in alsaplayer, it still shifts to 44100 ! This is true for both playing to hw:0,4 and to "rt". (Not tested with XMMS, can test if needed)
======================================================================

Bug History
Date Modified Username Field Change
======================================================================

10-11-04 20:45 ramendik       New Bug                                      
10-11-04 20:45 ramendik       Distribution              => ASP Linux, RH9-based
10-11-04 20:45 ramendik       Kernel Version            => 2.6.8.1-ck8 , with alsa 1.0.7rc1 stuck in and patches from bug 505 put on top

======================================================================

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl