Skip to contentSkip to conversation

Weird behaviour of usb printer (drivers/usb/class/usblp.c: usblp0: error -110 reading printer status)

DISCUSSION Pete Zaitcev 2 participants 3 messages Oct 21, 2004 – Oct 25, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 1 line · Georg Schild

drivers/usb/class/usblp.c: usblp0: error -110 reading printer status

A known problem. Also very rare, unfortunately.

Quoted 2 lines

I have tried several kernelversions, some with included patchset from gentoo and some vanilla kernels.

You are making a usual mistake here. It is essential for you not to cover the widest possible field at this point, but to name AT LEAST ONE version which is proven to have this defect. Please do so.

Also, please send your /proc/bus/usb/devices.

-- Pete

#2 lore raw
Quoted 4 lines

You are making a usual mistake here. It is essential for you not to cover the widest possible field at this point, but to name AT LEAST ONE version which is proven to have this defect.

Okay, i am sure that 2.6.9-rc3 has this mistake

Quoted 2 lines

Also, please send your /proc/bus/usb/devices.

Here the output. The printer is accepted and works at this moment. Current kernel is 2.6.9, don't know if the failure still exists though i
am using it just for about 2 hours yet and until the mistake almost 1
day has gone. I will tell immediatly if the error doesn't come up again. If someone needs some more information just tell me.

Thanks for response

Georg Schild

Quoted 70 lines
T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=3304 Rev= 1.00
S:  Manufacturer=Hewlett-Packard
S:  Product=DeskJet 990C
S:  SerialNumber=ES12C1D0Y5LG
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=129/900 us (14%), #Int=  2, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.9-gentoo-r1 uhci_hcd
S:  Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c404 Rev= 2.20
S:  Manufacturer=Logitech
S:  Product=Trackball
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 3
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=045e ProdID=001c Rev= 5.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 64mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.9-gentoo-r1 ehci_hcd
S:  Product=VIA Technologies, Inc. USB 2.0
S:  SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
#3 lore raw

2.6.9 doesn't work either, i had to reboot today morning

Georg Schild