how to read the stats
Hi
I have setup iproute2 and need a bit of help reading the stats from it
===== output
qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17
Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572
requeues 0)
backlog 46p
qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec
Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0)
qdisc sfq 20: limit 128p quantum 1514b flows 128/1024 perturb 10sec
Sent 10136008 bytes 69886 pkts (dropped 0, overlimits 0 requeues 0)
qdisc sfq 30: limit 128p quantum 1514b flows 128/1024 perturb 10sec
Sent 495316458 bytes 541852 pkts (dropped 9303, overlimits 0 requeues
0)
backlog 46p
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
This I belive is my parent class is has access to the whole 64Kbit
class htb 1:1 root rate 64Kbit ceil 64Kbit burst 80b/8 mpu 0b overhead 0b cburst 1507b/8 mpu 0b overhead 0b level 7
Sent 542500093 bytes 1342581 pkts (dropped 0, overlimits 0 requeues 0) rate 7201bit 20pps
lended: 322826 borrowed: 0 giants: 0
tokens: -228224 ctokens: -45568
class htb 1:10 parent 1:1 leaf 10: prio 1 quantum 8 rate 57Kbit ceil 64Kbit burst 80b/8 mpu 0b overhead 0b cburst 1507b/8 mpu 0b overhead 0b level 0
Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) rate 681bit 12pps
lended: 730878 borrowed: 11 giants: 0
tokens: 2966 ctokens: 185856
class htb 1:20 parent 1:1 leaf 20: prio 2 quantum 8 rate 32Kbit ceil 57Kbit burst 80b/8 mpu 0b overhead 0b cburst 71b/8 mpu 0b overhead 0b level 0
Sent 10136008 bytes 69886 pkts (dropped 0, overlimits 0 requeues 0) rate 302bit 1pps
lended: 68718 borrowed: 1168 giants: 0
tokens: -149248 ctokens: -73584
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
this is the low bandwidth class (bittorrent etc)
class htb 1:30 parent 1:1 leaf 30: prio 3 quantum 8 rate 25Kbit ceil 51Kbit burst 63b/8 mpu 0b overhead 0b cburst 47b/8 mpu 0b overhead 0b level 0
Sent 495316458 bytes 541852 pkts (dropped 9303, overlimits 0 requeues
0)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
THIS is the line I have problems understanding
I read it as 6190bit/sec which seems to be way lower than the 25Kbit set for the rate and much lower than the ceil
so why do I have a backlog
rate 6190bit 7pps backlog 46p
lended: 220159 borrowed: 321647 giants: 0
tokens: -493609 ctokens: -242500
Having said all that it does seem to be limiting to 25Kbit, with burst upto 51 !
This is on a patched debian 2.6.8 kernel (pom-ng patch'ed) and iproute2-ss040831
Thanks
Alex
Quoted 11 lines · Alexander Samad
class htb 1:30 parent 1:1 leaf 30: prio 3 quantum 8 rate 25Kbit ceil 51Kbit burst 63b/8 mpu 0b overhead 0b cburst 47b/8 mpu 0b overhead 0b level 0
Sent 495316458 bytes 541852 pkts (dropped 9303, overlimits 0 requeues
0)Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
THIS is the line I have problems understanding
I read it as 6190bit/sec which seems to be way lower than the 25Kbit set for the rate and much lower than the ceil
so why do I have a backlog
Quoted 7 lines
rate 6190bit 7pps backlog 46p
lended: 220159 borrowed: 321647 giants: 0
tokens: -493609 ctokens: -242500Having said all that it does seem to be limiting to 25Kbit, with burst upto 51 !
Can you post the executed tc commands? Much easier for us to see what you did.
Stef
Signature · 6 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi
okay
#!/bin/bash
#
# Script to test TC
IF=${IF:-'eth0'}
SPEED=64
#
# 327b for 256 kbits (1K)
# 131K burst for 100Mb/s
# 12K burst for 10Mb/s
# pipe size /100 /8 BURST=163 BURST=$[$SPEED*1024/100/8] MTU=1600 MTU=1500
TC='/sbin/tc'
TC='/usr/local/bin/tc'
tc_start2(){
# install root HTB, point default traffic to 1:20
tc qdisc add dev $IF root handle 1: htb default 20
# shape everything at $SPEED speed - this prevents huge queues in your
# DSL modem which destroy latency:
tc class add dev $IF parent 1: classid 1:1 htb rate ${SPEED}kbit ceil ${SPEED}kbit burst ${BURST}b mtu $MTU
# high prio class 1:10:
tc class add dev $IF parent 1:1 classid 1:10 htb rate $[9*${SPEED}/10]kbit ceil ${SPEED}kbit burst ${BURST}b prio 1 mtu $MTU quantum 8
# bulk & default class 1:20 - gets slightly less traffic,
# and a lower priority:
tc class add dev $IF parent 1:1 classid 1:20 htb rate $[5*${SPEED}/10]kbit ceil $[9*${SPEED}/10]kbit burst $[10*${BURST}/10]b cburst $[9*${BURST}/10]b prio 2 mtu $MTU quantum 8
# for BTTorrent
tc class add dev $IF parent 1:1 classid 1:30 htb rate $[4*${SPEED}/10]kbit ceil $[8*${SPEED}/10]kbit burst $[8*${BURST}/10]b cburst $[6*${BURST}/10]b prio 3 mtu $MTU quantum 8
# Filters
# both get Stochastic Fairness:
tc qdisc add dev $IF parent 1:10 handle 10: sfq perturb 10
tc qdisc add dev $IF parent 1:20 handle 20: sfq perturb 10
tc qdisc add dev $IF parent 1:30 handle 30: sfq perturb 10
# TOS Minimum Delay (ssh, NOT scp) in 1:10:
tc filter add dev $IF parent 1: protocol ip prio 10 u32 \
match ip tos 0x10 0xff \
flowid 1:10
# ICMP (ip protocol 1) in the interactive class 1:10 so we
# can do measurements & impress our friends:
tc filter add dev $IF parent 1: protocol ip prio 10 u32 \
match ip protocol 1 0xff \
flowid 1:10
# To speed up downloads while an upload is going on, put ACK packets in
# the interactive class:
tc filter add dev $IF parent 1: protocol ip pref 1 u32 \
match ip protocol 6 0xff \
match u8 0x05 0x0f at 0 \
match u16 0x0000 0xffc0 at 2 \
match u8 0x10 0xff at 33 \
flowid 1:10
# limit BTTorent to flow :30
# want to match all packets that have a source of 6880-6888
# as I can only match/rate limit out going
tc filter add dev $IF parent 1: protocol ip prio 10 u32 \
match ip protocol 6 0xff \
match ip sport 6880 0xfff0 \
flowid 1:30# match u16 0x1ae0 0xfff0 at 20 \
# Match firewall marks
tc filter add dev $IF parent 1: protocol ip pref 5 handle 4 fw flowid 1:30
# # For pings !
# tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 1 0xFF flowid 1:10
# rest is 'non-interactive' ie 'bulk' and ends up in 1:20
}
tc_start(){
tc_start2
}
tc_stop(){
$TC qdisc del dev $IF root
}
tc_show(){
$TC -s -d qdisc show dev $IF
$TC -s -d class show dev $IF
$TC -s -d filter show dev $IF
}
case "$1" in
start) tc_start ;; stop) tc_stop ;; restart) tc_stop tc_start ;; show) tc_show ;; *) tc_show #exit 1 ;;
esac
exit 0
Thanks
Quoted 32 lines · Stef Coene
Quoted 11 lines · Alexander Samad
class htb 1:30 parent 1:1 leaf 30: prio 3 quantum 8 rate 25Kbit ceil 51Kbit burst 63b/8 mpu 0b overhead 0b cburst 47b/8 mpu 0b overhead 0b level 0
Sent 495316458 bytes 541852 pkts (dropped 9303, overlimits 0 requeues
0)Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
THIS is the line I have problems understanding
I read it as 6190bit/sec which seems to be way lower than the 25Kbit set for the rate and much lower than the ceil
so why do I have a backlogQuoted 7 lines
rate 6190bit 7pps backlog 46p
lended: 220159 borrowed: 321647 giants: 0
tokens: -493609 ctokens: -242500Having said all that it does seem to be limiting to 25Kbit, with burst upto 51 !
Can you post the executed tc commands? Much easier for us to see what you did.
Stef
Signature · 6 lines
[email protected] ?"Using Linux as bandwidth manager" ? ? ?http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/