Skip to contentSkip to conversation

Machines self-power-up with 2.6.9-rc3 (evo N620c, ASUS, ...)

DISCUSSION Pavel Machek 5 participants 11 messages Oct 20, 2004 – Oct 22, 2004 ACPI

lore
Share & tools
lore
#0 lore raw

Hi!

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

Ouch, acpi=off makes it even worse [2.6.9-rc3, N620c]. I get some very strange show on the leds (battery charge led blinks fast?!), then machine powers up itself. This happens even with lid initially open. 2.6.7 works as expected.

Any ideas?
Pavel

Signature · 2 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
#1 lore raw

Pavel,

Thanks for your report. I have some suggestions to identify your problem and help ACPI developers to work more effectively.

The developers are working both fixing ACPI related bugs and applying work around for bad BIOS behaviors. At this time I think fixing bugs is more important than applying work around.

So if your problem on some machine is so serious, could you please give us the BIOS version and whether the machine suspend/resume is OK in ACPI mode of Windows 2000/XP too? Of course DSDT table check is highly helpful. http://bugzilla.kernel.org/ is prepared for such purpose.

I believe such details help the developers to avoid spending much time to rescue desperate BIOS and to keep tight release schedule.

- Hiro

acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org wrote on 2004/10/21 04:15:31:

Quoted 7 lines

Hi!

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

Quoted 7 lines

Ouch, acpi=off makes it even worse [2.6.9-rc3, N620c]. I get some very strange show on the leds (battery charge led blinks fast?!), then machine powers up itself. This happens even with lid initially open. 2.6.7 works as expected.

Any ideas?
Pavel

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#2 lore raw

Hi!

Quoted 7 lines

Thanks for your report. I have some suggestions to identify your problem and help ACPI developers to work more effectively.

The developers are working both fixing ACPI related bugs and applying work around for bad BIOS behaviors. At this time I think fixing bugs is more important than applying work around.

Quoted 5 lines

So if your problem on some machine is so serious, could you please give us the BIOS version and whether the machine suspend/resume is OK in ACPI mode of Windows 2000/XP too? Of course DSDT table check is highly helpful. http://bugzilla.kernel.org/ is prepared for such purpose.

I was not talking about suspend/resume here, it wakes up even after plain /sbin/shutdown -h now. I do not have Windows here to try, but it works well in 2.6.7...

Pavel

Quoted 11 lines
Quoted 11 lines

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

Ouch, acpi=off makes it even worse [2.6.9-rc3, N620c]. I get some very strange show on the leds (battery charge led blinks fast?!), then machine powers up itself. This happens even with lid initially open. 2.6.7 works as expected.

Any ideas?

Signature · 9 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
#3 lore raw
In reply to Pavel Machek

Hi.

Quoted 6 lines · Pavel Machek

Hi!

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

:> Some people would love to have the machine power up when they open the lid! Wish my XE3 would do that!

Quoted 4 lines

Ouch, acpi=off makes it even worse [2.6.9-rc3, N620c]. I get some very strange show on the leds (battery charge led blinks fast?!), then machine powers up itself. This happens even with lid initially open. 2.6.7 works as expected.

Nigel

Signature · 7 lines
Nigel Cunningham
Pastoral Worker
Christian Reformed Church of Tuggeranong
PO Box 1004, Tuggeranong, ACT 2901

Many today claim to be tolerant. True tolerance, however, can cope with others
being intolerant.
#4 lore raw

Hi!

Quoted 7 lines
Quoted 4 lines

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

:> Some people would love to have the machine power up when they open the lid! Wish my XE3 would do that!

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.
Pavel

Signature · 9 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
#5 lore raw
Quoted 7 lines · Pavel Machek
Quoted 7 lines
Quoted 4 lines

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

:> Some people would love to have the machine power up when they open the lid! Wish my XE3 would do that!

This problem sounds like a wake GPE is enabled for the lid switch and that it has a _PRW that indicates it can wake the system from S5. If this is the case, just disabled the GPE.

Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

This is likely a similar GPE problem. The GPE for the EC fires even in S5. I think the EC GPE should be disabled in the suspend method.

Signature · 8 lines
Nate


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
#6 lore raw
Quoted 17 lines · Nate Lawson
Quoted 1 line · Pavel Machek
Quoted 1 line
Quoted 1 line

I'm seeing bad problem with N620c notebook (and have reports of

more

Quoted 1 line
Quoted 1 line
Quoted 1 line

machines behaving like this, for example ASUS L8400C.) If I

shutdown

Quoted 1 line
Quoted 1 line
Quoted 1 line

machine with lid closed, opening lid will power the machine up.

Ouch.

Quoted 3 lines
Quoted 3 lines
Quoted 1 line

2.6.7 behaves okay.

:> Some people would love to have the machine power up when they

open

Quoted 1 line
Quoted 1 line

the lid! Wish my XE3 would do that!

This problem sounds like a wake GPE is enabled for the lid switch and that it has a _PRW that indicates it can wake the system from S5. If this is the case, just disabled the GPE.

Quoted 7 lines
Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

This is likely a similar GPE problem. The GPE for the EC fires even in
S5. I think the EC GPE should be disabled in the suspend method.

It could be the wakeup GPE issue, but must note Pavel's system suffer the problem even with acpi=off. Could you please try boot your system with acpi=off, and then reboot with acpi=off, what's the result? I expected the wakeup GPE is disabled by the BIOS in this case. Anyway, the DSDT can tell us the wakeup GPE info.

Thanks,
Shaohua

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#7 lore raw

Hi!

Quoted 4 lines
Quoted 4 lines
Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

Quoted 8 lines
Quoted 3 lines

This is likely a similar GPE problem. The GPE for the EC fires even in
S5. I think the EC GPE should be disabled in the suspend method.

It could be the wakeup GPE issue, but must note Pavel's system suffer the problem even with acpi=off. Could you please try boot your system with acpi=off, and then reboot with acpi=off, what's the result? I expected the wakeup GPE is disabled by the BIOS in this case. Anyway, the DSDT can tell us the wakeup GPE info.

You want me to boot with acpi=off twice and see if machine powers down okay in second case?

Compressed DSDT is attached.
Pavel

Signature · 2 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
#8 lore raw
Quoted 9 lines · Pavel Machek

Hi!

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

This is likely a similar GPE problem. The GPE for the EC fires even in
S5. I think the EC GPE should be disabled in the suspend method.

Quoted 8 lines
Quoted 5 lines

It could be the wakeup GPE issue, but must note Pavel's system suffer the problem even with acpi=off. Could you please try boot your system with acpi=off, and then reboot with acpi=off, what's the result? I expected the wakeup GPE is disabled by the BIOS in this case. Anyway, the DSDT can tell us the wakeup GPE info.

You want me to boot with acpi=off twice and see if machine powers down okay in second case?

Yes, indeed.

Quoted 2 lines

Compressed DSDT is attached.

The dmesg shows your system can be waked up by Lid from S4 but not S5. But there is another device (looks like the LPC bridge) can wakeup your system from S5.

Thanks,
Shaohua

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

#9 lore raw

Hi!

Quoted 13 lines
Quoted 13 lines
Quoted 12 lines
Quoted 7 lines
Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

This is likely a similar GPE problem. The GPE for the EC fires even in
S5. I think the EC GPE should be disabled in the suspend method.

It could be the wakeup GPE issue, but must note Pavel's system suffer the problem even with acpi=off. Could you please try boot your system with acpi=off, and then reboot with acpi=off, what's the result? I expected the wakeup GPE is disabled by the BIOS in this case. Anyway, the DSDT can tell us the wakeup GPE info.

Quoted 3 lines
Quoted 2 lines

You want me to boot with acpi=off twice and see if machine powers down okay in second case?

Yes, indeed.

Okay, I did poweron, boot with acpi=off, reboot (again with acpi=off), then shutdown -h now. I got the same strange lightshow at the leds and reboot instead of powerdown.
Pavel

Signature · 9 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
#10 lore raw
In reply to Nate Lawson

Hi!

Quoted 11 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines

I'm seeing bad problem with N620c notebook (and have reports of more machines behaving like this, for example ASUS L8400C.) If I shutdown machine with lid closed, opening lid will power the machine up. Ouch. 2.6.7 behaves okay.

:> Some people would love to have the machine power up when they open the lid! Wish my XE3 would do that!

This problem sounds like a wake GPE is enabled for the lid switch and that it has a _PRW that indicates it can wake the system from S5. If this is the case, just disabled the GPE.

I tried disabling all events in /proc/acpi/wakeup, and that did not change anything.

Quoted 6 lines
Quoted 3 lines

:-). Well for some other people it powers up when they unplug AC power, and *that* is nasty. I'd like my machine to stay powered down when I tell it so.

This is likely a similar GPE problem. The GPE for the EC fires even in S5. I think the EC GPE should be disabled in the suspend method.

How did this hangling changed between 2.6.7 and 2.6.9?
Pavel

Signature · 9 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl