fbdev: S3 Savage Framebuffer Driver

257 lines not on this page · raw message

2,282 lines not on this page · raw message

354 lines not on this page · raw message

48 lines not on this page · raw message

diff -Nru a/include/linux/fb.h b/include/linux/fb.h

Lines of this file are not shown. View the raw message.

diff -puN drivers/video/savage/savagefb.h~savagefb-build-fix drivers/video/savage/savagefb.h
@@ -21,7 +21,7 @@
 # define DBG(x)		printk (KERN_DEBUG "savagefb: %s\n", (x));
 #else
 # define DBG(x)
-# define SavagePrintRegs(x)
+# define SavagePrintRegs(...)
 #endif
 
 

diff -puN drivers/video/savage/savagefb.c~savagefb-build-fix drivers/video/savage/savagefb.c
@@ -2248,9 +2248,9 @@ static void __exit savage_done (void)
 
 /* ************************* init in-kernel code ************************** */
 
-#ifndef MODULE
 int __init savagefb_setup(char *options)
 {
+#ifndef MODULE
 	char *this_opt;
 
 	if (!options || !*options)

@@ -2259,10 +2259,9 @@ int __init savagefb_setup(char *options)
 	while ((this_opt = strsep(&options, ",")) != NULL) {
 		mode_option = this_opt;
 	}
-
+#endif /* !MODULE */
 	return 0;
 }
-#endif /* !MODULE */
 
 int __init savagefb_init(void)
 {

diff -Nru a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
@@ -141,32 +141,37 @@
 static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
 				const char *name)
 {
-	int rc;
+	int (*add_bus)(struct i2c_adapter *) = symbol_get(i2c_bit_add_bus);
+	int rc = 0;
+
+	if (add_bus && chan->par) {
+		strcpy(chan->adapter.name, name);
+		chan->adapter.owner		= THIS_MODULE;
+		chan->adapter.id		= I2C_ALGO_SAVAGE;
+		chan->adapter.algo_data		= &chan->algo;
+		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
+		chan->algo.udelay		= 40;
+		chan->algo.mdelay               = 5;
+		chan->algo.timeout		= 20;
+		chan->algo.data 		= chan;
+
+		i2c_set_adapdata(&chan->adapter, chan);
+
+		/* Raise SCL and SDA */
+		chan->algo.setsda(chan, 1);
+		chan->algo.setscl(chan, 1);
+		udelay(20);
+
+		rc = add_bus(&chan->adapter);
+		if (rc == 0)
+			dev_dbg(&chan->par->pcidev->dev,
+				"I2C bus %s registered.\n", name);
+		else
+			dev_warn(&chan->par->pcidev->dev,
+				 "Failed to register I2C bus %s.\n", name);
+	} else
+		chan->par = NULL;
 
-	strcpy(chan->adapter.name, name);
-	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_ALGO_SAVAGE;
-	chan->adapter.algo_data		= &chan->algo;
-	chan->adapter.dev.parent	= &chan->par->pcidev->dev;
-	chan->algo.udelay		= 40;
-	chan->algo.mdelay               = 5;
-	chan->algo.timeout		= 20;
-	chan->algo.data 		= chan;
-
-	i2c_set_adapdata(&chan->adapter, chan);
-
-	/* Raise SCL and SDA */
-	chan->algo.setsda(chan, 1);
-	chan->algo.setscl(chan, 1);
-	udelay(20);
-
-	rc = i2c_bit_add_bus(&chan->adapter);
-	if (rc == 0)
-		dev_dbg(&chan->par->pcidev->dev,
-			"I2C bus %s registered.\n", name);
-	else
-		dev_warn(&chan->par->pcidev->dev,
-			 "Failed to register I2C bus %s.\n", name);
 	return rc;
 }
 

@@ -174,7 +179,7 @@
 {
 	struct savagefb_par *par = (struct savagefb_par *)info->par;
 	par->chan.par	= par;
-
+
 	switch(info->fix.accel) {
 	case FB_ACCEL_PROSAVAGE_DDRK:
 	case FB_ACCEL_PROSAVAGE_PM:

@@ -193,6 +198,8 @@
 		par->chan.algo.getsda = savage4_gpio_getsda;
 		par->chan.algo.getscl = savage4_gpio_getscl;
 		break;
+	default:
+		par->chan.par = NULL;
 	}
 
 	savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2");

@@ -202,9 +209,12 @@
 void savagefb_delete_i2c_busses(struct fb_info *info)
 {
 	struct savagefb_par *par = (struct savagefb_par *)info->par;
+	int (*del_bus)(struct i2c_adapter *) =
+		symbol_get(i2c_bit_del_bus);
+
+	if (del_bus && par->chan.par)
+		del_bus(&par->chan.adapter);
 
-	if (par->chan.par)
-		i2c_bit_del_bus(&par->chan.adapter);
 	par->chan.par = NULL;
 }
 EXPORT_SYMBOL(savagefb_delete_i2c_busses);

@@ -212,6 +222,8 @@
 static u8 *savage_do_probe_i2c_edid(struct savagefb_i2c_chan *chan)
 {
 	u8 start = 0x0;
+	int (*transfer)(struct i2c_adapter *, struct i2c_msg *, int) =
+		symbol_get(i2c_transfer);
 	struct i2c_msg msgs[] = {
 		{
 			.addr	= SAVAGE_DDC,

@@ -223,20 +235,23 @@
 			.len	= EDID_LENGTH,
 		},
 	};
-	u8 *buf;
+	u8 *buf = NULL;
 
-	buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
-	if (!buf) {
-		dev_warn(&chan->par->pcidev->dev, "Out of memory!\n");
-		return NULL;
+	if (transfer && chan->par) {
+		buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+		if (buf) {
+			msgs[1].buf = buf;
+
+			if (transfer(&chan->adapter, msgs, 2) != 2) {
+				dev_dbg(&chan->par->pcidev->dev,
+					"Unable to read EDID block.\n");
+				kfree(buf);
+				buf = NULL;
+			}
+		}
 	}
-	msgs[1].buf = buf;
 
-	if (i2c_transfer(&chan->adapter, msgs, 2) == 2)
-		return buf;
-	dev_dbg(&chan->par->pcidev->dev, "Unable to read EDID block.\n");
-	kfree(buf);
-	return NULL;
+	return buf;
 }
 
 int savagefb_probe_i2c_connector(struct savagefb_par *par, u8 **out_edid)

diff -Nru a/drivers/video/savage/savagefb.c b/drivers/video/savage/savagefb.c
@@ -738,7 +738,7 @@
 		}
 	}
 
-	if (!mode_valid && !list_empty(&info->modelist))
+	if (!mode_valid && info->monspecs.modedb_len)
 		return -EINVAL;
 
 	/* Is the mode larger than the LCD panel? */

@@ -1821,43 +1821,43 @@
 		break;
 	case FB_ACCEL_SAVAGE_MX_MV:
 		par->chip = S3_SAVAGE_MX;
-		snprintf (info->fix.id, 16, "S3 Savage/MX-MV");
+		snprintf (info->fix.id, 16, "Savage/MX-MV");
 		break;
 	case FB_ACCEL_SAVAGE_MX:
 		par->chip = S3_SAVAGE_MX;
-		snprintf (info->fix.id, 16, "S3 Savage/MX");
+		snprintf (info->fix.id, 16, "Savage/MX");
 		break;
 	case FB_ACCEL_SAVAGE_IX_MV:
 		par->chip = S3_SAVAGE_MX;
-		snprintf (info->fix.id, 16, "S3 Savage/IX-MV");
+		snprintf (info->fix.id, 16, "Savage/IX-MV");
 		break;
 	case FB_ACCEL_SAVAGE_IX:
 		par->chip = S3_SAVAGE_MX;
-		snprintf (info->fix.id, 16, "S3 Savage/IX");
+		snprintf (info->fix.id, 16, "Savage/IX");
 		break;
 	case FB_ACCEL_PROSAVAGE_PM:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 ProSavage");
+		snprintf (info->fix.id, 16, "ProSavagePM");
 		break;
 	case FB_ACCEL_PROSAVAGE_KM:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 ProSavage");
+		snprintf (info->fix.id, 16, "ProSavageKM");
 		break;
 	case FB_ACCEL_S3TWISTER_P:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 Twister");
+		snprintf (info->fix.id, 16, "TwisterP");
 		break;
 	case FB_ACCEL_S3TWISTER_K:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 TwisterK");
+		snprintf (info->fix.id, 16, "TwisterK");
 		break;
 	case FB_ACCEL_PROSAVAGE_DDR:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 ProSavage DDR");
+		snprintf (info->fix.id, 16, "ProSavageDDR");
 		break;
 	case FB_ACCEL_PROSAVAGE_DDRK:
 		par->chip = S3_PROSAVAGE;
-		snprintf (info->fix.id, 16, "S3 ProSavage DDR-K");
+		snprintf (info->fix.id, 16, "ProSavage8");
 		break;
 	}
 

@@ -2033,14 +2033,13 @@
 
 
 	fb_destroy_modedb(info->monspecs.modedb);
-	info->monspecs.modedb_len = 0;
 	info->monspecs.modedb = NULL;
 
 	err = register_framebuffer (info);
 	if (err < 0)
 		goto failed;
 
-	printk (KERN_INFO "fb: %s frame buffer device\n",
+	printk (KERN_INFO "fb: S3 %s frame buffer device\n",
 		info->fix.id);
 
 	/*