pm3fb: remove kernel 2.2 code (fwd)

PATCH New Adrian Bunk 1 participant 1 message Oct 23, 2004 Framebuffer layer

lore

Share & tools

lore

Adrian Bunk

author

2004-10-23 16:12 UTC #0 lore raw

PATCH 1/1 pm3fb: remove kernel 2.2 code (fwd)

FYI:
The patch forwarded below still applies against 2.6.9-mm1 (yew, I know the driver is marked as BROKEN).

Signed-off-by Adrian Bunk <[email protected]>

----- Forwarded message from Adrian Bunk <[email protected]> -----

Date: Sun, 8 Feb 2004 02:06:09 +0100
From: Adrian Bunk <[email protected]>
To: James Simmons <[email protected]>, Andrew Morton <[email protected]>
Cc: [email protected]
Subject: [2.6 patch] pm3fb: remove kernel 2.2 code

The patch below removes kernel 2.2 code from pm3fb.{c,h}.

It also removes KERNEL_2_4 and KERNEL_2_5 since all places where this was used had a
#if (defined KERNEL_2_4) || (defined KERNEL_2_5)

diffstat output:

 drivers/video/pm3fb.c |  287 +++++++-----------------------------------
 include/video/pm3fb.h |   40 -----
 2 files changed, 54 insertions(+), 273 deletions(-)

Please apply
Adrian

include/video/pm3fb.h renamed from include/video/pm3fb.h.old +1 ~~-39~~

@@ -1119,34 +1119,6 @@
 /* ***** pm3fb useful define and macro ***** */
 /* ***************************************** */
 
-/* kernel -specific definitions */
-/* what kernel is this ? */
-#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)))
-#define KERNEL_2_5
-#endif
-
-#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)))
-#define KERNEL_2_4
-#endif
-
-#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,2,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))) 
-#define KERNEL_2_2
-/* pci_resource_start, available in 2.2.18 */
-#include <linux/kcomp.h>
-#ifdef CONFIG_FB_OF
-#define SUPPORT_FB_OF
-#endif
-#endif
-
-#if (!defined(KERNEL_2_2)) && (!defined(KERNEL_2_4)) && (!defined(KERNEL_2_5))
-#error "Only kernel 2.2.x, kernel 2.4.y and kernel 2.5.z might work"
-#endif
-
-/* not sure if/why it's needed. doesn't work without on my PowerMac... */
-#ifdef __BIG_ENDIAN
-#define MUST_BYTESWAP
-#endif
-
 /* permedia3 -specific definitions */
 #define PM3_SCALE_TO_CLOCK(pr, fe, po) ((2 * PM3_REF_CLOCK * fe) / (pr * (1 << (po))))

@@ -1203,19 +1175,9 @@
 /* ******************************************** */
 /* ***** A bunch of register-access macro ***** */
 /* ******************************************** */
-#ifdef KERNEL_2_2
-#ifdef MUST_BYTESWAP /* we are writing big_endian to big_endian through a little_endian macro */
-#define PM3_READ_REG(r) __swab32(readl((l_fb_info->vIOBase + r)))
-#define PM3_WRITE_REG(r, v) writel(__swab32(v), (l_fb_info->vIOBase + r))
-#else /* MUST_BYTESWAP */
-#define PM3_WRITE_REG(r, v) writel(v, (l_fb_info->vIOBase + r))
-#define PM3_READ_REG(r) readl((l_fb_info->vIOBase + r))
-#endif /* MUST_BYTESWAP */
-#endif /* KERNEL_2_2 */
-#if (defined KERNEL_2_4) || (defined KERNEL_2_5) /* native-endian access */
+
 #define PM3_WRITE_REG(r, v) fb_writel(v, (l_fb_info->vIOBase + r))
 #define PM3_READ_REG(r) fb_readl((l_fb_info->vIOBase + r))
-#endif /* KERNEL_2_4 or KERNEL_2_5 */
 
 
 #define depth2bpp(d) ((d + 7L) & ~7L)

drivers/video/pm3fb.c renamed from drivers/video/pm3fb.c.old +53 ~~-234~~

383 lines not on this page · raw message

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

----- End forwarded message -----