Skip to contentSkip to conversation

Why bttv depends on FW_LOADER?

PATCH Petr Vandrovec 2 participants 2 messages Oct 23, 2004 – Oct 25, 2004 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hello,
what is purpose of this change in 2.6.10-rc1? I seem to have no
problems after removing dependency on FW_LOADER, and my hardware definitely does not need any firmware to work.

I also do not understand why bttv depends on I2C and selects
I2C_ALGOBIT. Should not it depend on I2C_ALGOBIT instead, or select both I2C and I2C_ALGOBIT. Doing it this way seems rather strange to me.
Thanks,
Petr Vandrovec

drivers/media/video/Kconfig 2004-10-23 22:09:21 +02:00 +1 -1
diff -Nru a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
@@ -9,7 +9,7 @@
 
 config VIDEO_BT848
        tristate "BT848 Video For Linux"
-       depends on VIDEO_DEV && PCI && I2C && SOUND
+       depends on VIDEO_DEV && PCI && I2C && FW_LOADER
        select I2C_ALGOBIT
        ---help---
          Support for BT848 based frame grabber/overlay boards. This includes
#1 lore raw
Quoted 11 lines · Petr Vandrovec

Hello,
what is purpose of this change in 2.6.10-rc1? I seem to have no
problems after removing dependency on FW_LOADER, and my hardware definitely does not need any firmware to work.

I also do not understand why bttv depends on I2C and selects
I2C_ALGOBIT. Should not it depend on I2C_ALGOBIT instead, or select both I2C and I2C_ALGOBIT. Doing it this way seems rather strange to me.
Thanks,
Petr Vandrovec

I'll second, third, or whatever place I have in the squawk line, this squawk, bttv has been working just fine with the former config settings. I'm on 2.6.9, but when I went to watch a little tv tonight, tvtime had a blue screen, saying it couldn't
open /dev/video0. An lsmod didn't show videodev or bttv and the modules do not exist in /lib/modules/2.6.9/kernel/*. I don't have any firmware to load, so this patch below needs to be reverted.

Quoted 13 lines

diff -Nru a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig --- a/drivers/media/video/Kconfig

  2004-10-23 22:09:21 +02:00 +++ b/drivers/media/video/Kconfig     
 2004-10-23 22:09:21 +02:00 @@ -9,7 +9,7 @@

config VIDEO_BT848
tristate "BT848 Video For Linux"

drivers/media/video/Kconfig 2004-10-23 22:09:21 +02:00 +1 -1
-       depends on VIDEO_DEV && PCI && I2C && SOUND
+       depends on VIDEO_DEV && PCI && I2C && FW_LOADER
       select I2C_ALGOBIT
       ---help---
         Support for BT848 based frame grabber/overlay boards. This

includes

Signature · 8 lines
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.28% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.