Compile problem for ARM / LPD7A400

Hi everyone,

I am using arm-linux GCC 3.3 with GlibC 2.3.2. I have managed to compile a Linux version 2.6 kernel with this setup and patches for Logic PD card engine LPD7A400.

I am trying to get a version of U-Boot with working with the same. I have applied all available patches, that I gathered for the board from this list serve.

I get the following errors when I am trying to compile UBoot. Is there anyone who can encoutnered this problem and if so any lead?

Thanks in advance.

Dump from compile time:
In file included from cfi_flash.c:48:
/home/devraj/lpd7a400/uboot/u-boot-1.1.1.lpd7a400/include/asm/processor.h:52:
parse error before `1' /home/devraj/lpd7a400/uboot/u-boot-1.1.1.lpd7a400/include/asm/processor.h:52:
warning: no semicolon at end of struct or union /home/devraj/lpd7a400/uboot/u-boot-1.1.1.lpd7a400/include/asm/processor.h:54:
parse error before `}' /home/devraj/lpd7a400/uboot/u-boot-1.1.1.lpd7a400/include/asm/processor.h:58:
field `insn' has incomplete type
make[1]: *** [cfi_flash.o] Error 1
make[1]: Leaving directory `/home/devraj/lpd7a400/uboot/u-boot-1.1.1.lpd7a400/drivers'
make: *** [drivers/libdrivers.a] Error 2

Regards,
Devraj

Did you try compiling the tree with some other, known to be working toolchain?

Are you absolutely sure that:

1) none of your source files has been crippled with DOS line endings (for example by downloading or storing on a windoze machine) ?

2) That your toolchain does not defione silly constants like "arm" ?

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Es gibt immer genug fuer die Beduerfnisse aller, aber  niemals  genug
fuer die Gier einzelner.                                    -- Ghandi