IDE warning: "Wait for ready failed before probe!"
Quoted 6 lines
A couple of mails with Bartlomiej assured me that it isn't required on modern(ish) machines that have PCI (in theory), so do not need that option.
That will stop the probe, and the post from Alan re the Redhat thread suggests it is a debug warning anyway that maybe was never removed.
*Reboot*
Also I forgot, Bartlomiej said machine would reboot faster. *Wow* does it ever \o/
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:07.1
ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pioProbing IDE interface ide0...
hda: QUANTUM FIREBALL CR8.4A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=16383/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
No probes on wonky legacy stuff, all works :) :).
I really think the kconfig help on the CONFIG_IDE_GENERIC needs updating instead of the 'if unsure say Y'. I would submit a patch, but I don't really know what the hell I am talking about on this subject.
Thanks Bartlomiej :)
Nick
Signature · 2 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle..."