Problem in 2.4.28-rc1 with e1000 and io-apic
Hello,
I've got problems with a bi-xeon based on Intel E7320 chipset with 2.4.28-rc1. When I boot the smp kernel, IO-APIC works fine for all devices except for both e1000 lan.
e1000 driver reports on dmesg "watchdog tx errors".
I suppose it is an io-apic problem:
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 38000646 0 0 0 IO-APIC-edge timer
1: 2 0 0 0 IO-APIC-edge keyboard
2: 0 0 0 0 XT-PIC cascade
4: 16 0 0 0 IO-APIC-edge serial
8: 1 0 0 0 IO-APIC-edge rtc
71: 0 0 0 0 none eth1
72: 0 0 0 0 none eth0
[...] ^^^^^^The system can't handle the lan interrupts. It should be the problem.
Enable or disable NAPI option for e1000 doesn't resolve the problem.
But, when I boot the kernel with "noapic" option, both lans work fine:
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 1090980 0 0 0 XT-PIC timer
1: 235 0 0 0 XT-PIC keyboard
2: 0 0 0 0 XT-PIC cascade
4: 16 0 0 0 XT-PIC serial
8: 1 0 0 0 XT-PIC rtc
9: 15629 0 0 0 XT-PIC eth0, eth1
[...]Maybe, there are devices that are not supported on this kernel and that create this problem:
# lspci 00:00.0 Host bridge: Intel Corp. E7320 Memory Controller Hub (rev 0a) 00:02.0 PCI bridge: Intel Corp. E7525/E7520/E7320 PCI Express Port A (rev 0a) 00:03.0 PCI bridge: Intel Corp. E7525/E7520/E7320 PCI Express Port A1 (rev 0a) 00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) 00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02) 01:00.0 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge A (rev 09) 01:00.2 PCI bridge: Intel Corp. 6700PXH PCI Express-to-PCI Bridge B (rev 09) 03:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev c1) 05:01.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller 05:02.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller 06:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
Is there a way to force type of interrupts for both e1000 lan on "IO-APIC-level"? or maybe to find the bug?
Thanks in advance.
Miro