Skip to contentSkip to conversation

2.6.10-rc1-mm2: konqueror segfaults for no reason

DISCUSSION Rafael J. Wysocki 3 participants 11 messages Oct 29, 2004 – Nov 1, 2004 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

On 2.6.10-rc1-mm2 with SuSE 9.1 /x86_64 konqueror always crashes for no specific reason and the following messages appear in dmesg:

local[18494]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4
local[18493]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4

This does not happen on 2.6.10-rc1.

The .config is available at:
http://www.sisk.pl/kernel/041029/2.6.10-rc1-mm2.config

Greets,
RJW

Signature · 3 lines
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"
#1 lore raw
Quoted 10 lines · Rafael J. Wysocki

Hi,

On 2.6.10-rc1-mm2 with SuSE 9.1 /x86_64 konqueror always crashes for no specific reason and the following messages appear in dmesg:

local[18494]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4
local[18493]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4

Quoted 4 lines

This does not happen on 2.6.10-rc1.

The .config is available at:
http://www.sisk.pl/kernel/041029/2.6.10-rc1-mm2.config

Can you back out patches and try to figure out which one caused it? Doing a strace -f -o LOG of konqueror before the fault may also be interesting to see what it did before it crashes.

-Andi

#2 lore raw
In reply to Rafael J. Wysocki
Quoted 11 lines · Rafael J. Wysocki

Hi,

On 2.6.10-rc1-mm2 with SuSE 9.1 /x86_64 konqueror always crashes for no specific reason and the following messages appear in dmesg:

local[18494]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4
local[18493]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4

This does not happen on 2.6.10-rc1.

I tested this now too and konqueror also works fine for me.

-Andi

#3 lore raw
Quoted 6 lines · Andi Kleen
Quoted 5 lines · Rafael J. Wysocki

Hi,

On 2.6.10-rc1-mm2 with SuSE 9.1 /x86_64 konqueror always crashes for no specific reason and the following messages appear in dmesg:

Quoted 8 lines
Quoted 6 lines

local[18494]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4
local[18493]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4

This does not happen on 2.6.10-rc1.

I tested this now too and konqueror also works fine for me.

Have you tested this on an SMP machine? Mine is a UP. I'll chek a dual Opteron box in a couple of minutes.

Greets,
RJW

Signature · 3 lines
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"
#4 lore raw
Quoted 1 line

Have you tested this on an SMP machine? Mine is a UP. I'll chek a dual

Yes, on a Dual Opteron with web browsing. Similar with firefox.

-Andi

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw
Quoted 6 lines · Rafael J. Wysocki
Quoted 3 lines · Andi Kleen
Quoted 1 line

Have you tested this on an SMP machine? Mine is a UP. I'll chek a dual

Yes, on a Dual Opteron with web browsing. Similar with firefox.

Can you, please, send me your .config?

arch/x86_64/defconfig as always.

-Andi

#7 lore raw
Quoted 3 lines · Andi Kleen
Quoted 2 lines · Rafael J. Wysocki
Quoted 1 line · Andi Kleen
Quoted 1 line

Have you tested this on an SMP machine? Mine is a UP. I'll chek a

dual

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Yes, on a Dual Opteron with web browsing. Similar with firefox.

Can you, please, send me your .config?

arch/x86_64/defconfig as always.

Same thing. Hmm. What about gcc? I use gcc 3.3.3 (out of SuSE 9.1).

Greets,
RJW

Signature · 3 lines
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"
#8 lore raw

2.6.10-rc1-mm2: konqueror crash because of cputime patches

In reply to a message not in the archive
Quoted 5 lines · Rafael J. Wysocki
Quoted 3 lines · Andi Kleen
Quoted 1 line

Have you tested this on an SMP machine? Mine is a UP. I'll chek a dual

Yes, on a Dual Opteron with web browsing. Similar with firefox.

Quoted 8 lines

Can you, please, send me your .config?

There's something nasty going on here.

For konqueror vs 2.6.10-rc1-mm2, I have the problem reproduced on the dual Opteron machine, although the konqueror itself is different (3.3.1) than on the UP box (3.2.3): it (ie the konqueror) starts normally, but crashes when try to open an arbitrary web page (eg linuxtoday.com).

Well, an arbitrary web page need not be sufficient. Apparently, the web page needs to contain JavaScript to make konqueror crash. Also, when JavaScript is disabled in konqueror, it works normally, so I assume that it crashes on an attempt to execute JavaScript.

[-- snip]

Quoted 2 lines

I think I'll first try to play with the .config settings. Then, I'll search through the patches.

Done. Evidently, if the cputime patches:

cputime-introduce-cputime-fix.patch
cputime-introduce-cputime.patch
cputime-missing-pieces.patch

are reversed, konqueror works fine again on 2.6.10-rc1-mm2 (verified on two different systems).

I have created a bugzilla entry for it at:
http://bugzilla.kernel.org/show_bug.cgi?id=3675

If you need any more information, please let me know and I'll post it there.

Greets,
RJW

Signature · 3 lines
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"
#9 lore raw

Re: 2.6.10-rc1-mm2: konqueror crash because of cputime patches

Quoted 6 lines · Rafael J. Wysocki

Done. Evidently, if the cputime patches:

cputime-introduce-cputime-fix.patch
cputime-introduce-cputime.patch
cputime-missing-pieces.patch

Reversing theese fixed my konqueror issues to. In 2.6.10-rc1-mm2 , konqueror would crash instantly when I tried browsing a webpage ( any page ).

mattt

#10 lore raw

Re: 2.6.10-rc1-mm2: konqueror crash because of cputime patches

In reply to Rafael J. Wysocki

[intentional fullquote]

Quoted 26 lines · Rafael J. Wysocki
Quoted 10 lines
Quoted 1 line

Yes, on a Dual Opteron with web browsing. Similar with firefox.

Can you, please, send me your .config?

There's something nasty going on here.

For konqueror vs 2.6.10-rc1-mm2, I have the problem reproduced on the dual Opteron machine, although the konqueror itself is different (3.3.1) than on the UP box (3.2.3): it (ie the konqueror) starts normally, but crashes when try to open an arbitrary web page (eg linuxtoday.com).

Well, an arbitrary web page need not be sufficient. Apparently, the web page needs to contain JavaScript to make konqueror crash. Also, when JavaScript is disabled in konqueror, it works normally, so I assume that it crashes on an attempt to execute JavaScript.

[-- snip]

Quoted 2 lines

I think I'll first try to play with the .config settings. Then, I'll search through the patches.

Done. Evidently, if the cputime patches:

cputime-introduce-cputime-fix.patch
cputime-introduce-cputime.patch
cputime-missing-pieces.patch

Quoted 7 lines

are reversed, konqueror works fine again on 2.6.10-rc1-mm2 (verified on two different systems).

I have created a bugzilla entry for it at:
http://bugzilla.kernel.org/show_bug.cgi?id=3675

If you need any more information, please let me know and I'll post it there.

Ok thanks. I will leave it to Martin to figure out.

-Andi

#11 lore raw

Re: 2.6.10-rc1-mm2: konqueror segfaults for no reason (2nd update)

In reply to Andi Kleen
Quoted 6 lines · Andi Kleen
Quoted 5 lines · Rafael J. Wysocki

Hi,

On 2.6.10-rc1-mm2 with SuSE 9.1 /x86_64 konqueror always crashes for no specific reason and the following messages appear in dmesg:

Quoted 8 lines
Quoted 6 lines

local[18494]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4
local[18493]: segfault at 0000003000000018 rip 0000000000428f2a rsp 0000007fbfffe870 error 4

This does not happen on 2.6.10-rc1.

I tested this now too and konqueror also works fine for me.

Have you tried to open pages containing JavaScript? It turns out that my konqueror(s) work(s) fine on 2.6.10-rc1-mm2 when I disable JavaScript in it (them).

Greets,
RJW

Signature · 3 lines
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
		-- Lewis Carroll "Alice's Adventures in Wonderland"