convert arlan wireless driver to module_param
Subsystems (2)
PATCH 1/1 convert arlan wireless driver to module_param
Replaces MODULE_PARM with module_param calls in arlan wireless driver.
I also reordered module parameter declarations a little to improve readability. All debug related parameter stuff is now declared in one block, rather than all over the place. Some debug related module parameters even used to be declared outside DEBUG #ifdefs. Generally, the arlan debug code is still broken, though. It currently does not compile, and this patch does not make it compile.
net/wireless/arlan-main.c renamed from net/wireless/arlan-main.c.orig +29 -35
@@ -31,52 +31,46 @@ static int retries = 5;static int tx_queue_len =1 ;static int arlan_EEPROM_bad; -#ifdef ARLAN_DEBUGGING +module_param (arlan_debug, bool,0644 ); +module_param (spreadingCode, int,0644 ); +module_param (channelNumber, int,0644 ); +module_param (channelSet, int,0644 ); +module_param (systemId, int,0644 ); +module_param (registrationMode, int,0644 ); +module_param (radioNodeId, int,0644 ); +module_param (SID , int,0644 ); +module_param (keyStart, int,0644 ); +module_param (tx_delay_ms, int,0644 ); +module_param (retries, int,0644 ); +module_param (tx_queue_len, int,0644 ); +module_param (arlan_EEPROM_bad, bool,0644 ); +MODULE_PARM_DESC (arlan_debug,"Arlan debug enable (0-1)" ); +MODULE_PARM_DESC (retries,"Arlan maximum packet retransmisions" ); -static int arlan_entry_debug; -static int arlan_exit_debug; +#ifdef ARLAN_DEBUGGING static int testMemory = testMemoryUNKNOWN;static int irq = irqUNKNOWN;static int txScrambled =1 ;static int mdebug; -#endif - -MODULE_PARM (irq,"i" ); -MODULE_PARM (mem,"i" ); -MODULE_PARM (arlan_debug,"i" ); -MODULE_PARM (testMemory,"i" ); -MODULE_PARM (spreadingCode,"i" ); -MODULE_PARM (channelNumber,"i" ); -MODULE_PARM (channelSet,"i" ); -MODULE_PARM (systemId,"i" ); -MODULE_PARM (registrationMode,"i" ); -MODULE_PARM (radioNodeId,"i" ); -MODULE_PARM (SID ,"i" ); -MODULE_PARM (txScrambled,"i" ); -MODULE_PARM (keyStart,"i" ); -MODULE_PARM (mdebug,"i" ); -MODULE_PARM (tx_delay_ms,"i" ); -MODULE_PARM (retries,"i" ); -MODULE_PARM (async,"i" ); -MODULE_PARM (tx_queue_len,"i" ); -MODULE_PARM (arlan_entry_debug,"i" ); -MODULE_PARM (arlan_exit_debug,"i" ); -MODULE_PARM (arlan_entry_and_exit_debug,"i" ); -MODULE_PARM (arlan_EEPROM_bad,"i" ); -MODULE_PARM_DESC (irq,"(unused)" ); -MODULE_PARM_DESC (mem,"Arlan memory address for single device probing" ); -MODULE_PARM_DESC (arlan_debug,"Arlan debug enable (0-1)" ); +module_param (testMemory, bool,0644 );MODULE_PARM_DESC (testMemory,"(unused)" ); +module_param (irq, int,0444 ); +MODULE_PARM_DESC (irq,"(unused)" ); +module_param (txScrambled, bool,0644 ); +module_param (mdebug, bool,0644 );MODULE_PARM_DESC (mdebug,"Arlan multicast debugging (0-1)" ); -MODULE_PARM_DESC (retries,"Arlan maximum packet retransmisions" ); +#endif +#ifdef ARLAN_ENTRY_EXIT_DEBUGGING +static int arlan_entry_debug; +static int arlan_exit_debug; +static int arlan_entry_and_exit_debug; +module_param (arlan_entry_debug, bool,0644 ); +module_param (arlan_exit_debug, bool,0644 ); +module_param (arlan_entry_and_exit_debug, bool,0644 );MODULE_PARM_DESC (arlan_entry_debug,"Arlan driver function entry debugging" );MODULE_PARM_DESC (arlan_exit_debug,"Arlan driver function exit debugging" );MODULE_PARM_DESC (arlan_entry_and_exit_debug,"Arlan driver function entry and exit debugging" ); -#else -MODULE_PARM_DESC (arlan_entry_debug,"(ignored)" ); -MODULE_PARM_DESC (arlan_exit_debug,"(ignored)" ); -MODULE_PARM_DESC (arlan_entry_and_exit_debug,"(ignored)" );#endif struct arlan_conf_stru arlan_conf[MAX_ARLANS ];
_______________________________________________
Kernel-janitors mailing list
[email protected]
http://lists.osdl.org/mailman/listinfo/kernel-janitors
Quoted 7 lines · Stefan Sperling
Replaces
MODULE_PARMwithmodule_paramcalls in arlan wireless driver.I also reordered module parameter declarations a little to improve readability. All debug related parameter stuff is now declared in one block, rather than all over the place. Some debug related module parameters even used to be declared outside DEBUG #ifdefs. Generally, the arlan debug code is still broken, though. It currently does not compile, and this patch does not make it compile.
Did you at least make sure that (e.g.)
int debug;
is in the source file *before*
module_param(debug, bool, 0644);
This wasn't required for MODULE_PARM() -- i.e., it's different for module_param().
Quoted 84 lines
net/wireless/arlan-main.c renamed from net/wireless/arlan-main.c.orig +29
-35@@ -31,52 +31,46 @@ static int retries = 5;static int tx_queue_len =1 ;static int arlan_EEPROM_bad; -#ifdef ARLAN_DEBUGGING +module_param (arlan_debug, bool,0644 ); +module_param (spreadingCode, int,0644 ); +module_param (channelNumber, int,0644 ); +module_param (channelSet, int,0644 ); +module_param (systemId, int,0644 ); +module_param (registrationMode, int,0644 ); +module_param (radioNodeId, int,0644 ); +module_param (SID , int,0644 ); +module_param (keyStart, int,0644 ); +module_param (tx_delay_ms, int,0644 ); +module_param (retries, int,0644 ); +module_param (tx_queue_len, int,0644 ); +module_param (arlan_EEPROM_bad, bool,0644 ); +MODULE_PARM_DESC (arlan_debug,"Arlan debug enable (0-1)" ); +MODULE_PARM_DESC (retries,"Arlan maximum packet retransmisions" ); -static int arlan_entry_debug; -static int arlan_exit_debug; +#ifdef ARLAN_DEBUGGING static int testMemory = testMemoryUNKNOWN;static int irq = irqUNKNOWN;static int txScrambled =1 ;static int mdebug; -#endif - -MODULE_PARM (irq,"i" ); -MODULE_PARM (mem,"i" ); -MODULE_PARM (arlan_debug,"i" ); -MODULE_PARM (testMemory,"i" ); -MODULE_PARM (spreadingCode,"i" ); -MODULE_PARM (channelNumber,"i" ); -MODULE_PARM (channelSet,"i" ); -MODULE_PARM (systemId,"i" ); -MODULE_PARM (registrationMode,"i" ); -MODULE_PARM (radioNodeId,"i" ); -MODULE_PARM (SID ,"i" ); -MODULE_PARM (txScrambled,"i" ); -MODULE_PARM (keyStart,"i" ); -MODULE_PARM (mdebug,"i" ); -MODULE_PARM (tx_delay_ms,"i" ); -MODULE_PARM (retries,"i" ); -MODULE_PARM (async,"i" ); -MODULE_PARM (tx_queue_len,"i" ); -MODULE_PARM (arlan_entry_debug,"i" ); -MODULE_PARM (arlan_exit_debug,"i" ); -MODULE_PARM (arlan_entry_and_exit_debug,"i" ); -MODULE_PARM (arlan_EEPROM_bad,"i" ); -MODULE_PARM_DESC (irq,"(unused)" ); -MODULE_PARM_DESC (mem,"Arlan memory address for single device probing" ); -MODULE_PARM_DESC (arlan_debug,"Arlan debug enable (0-1)" ); +module_param (testMemory, bool,0644 );MODULE_PARM_DESC (testMemory,"(unused)" ); +module_param (irq, int,0444 ); +MODULE_PARM_DESC (irq,"(unused)" ); +module_param (txScrambled, bool,0644 ); +module_param (mdebug, bool,0644 );MODULE_PARM_DESC (mdebug,"Arlan multicast debugging (0-1)" ); -MODULE_PARM_DESC (retries,"Arlan maximum packet retransmisions" ); +#endif +#ifdef ARLAN_ENTRY_EXIT_DEBUGGING +static int arlan_entry_debug; +static int arlan_exit_debug; +static int arlan_entry_and_exit_debug; +module_param (arlan_entry_debug, bool,0644 ); +module_param (arlan_exit_debug, bool,0644 ); +module_param (arlan_entry_and_exit_debug, bool,0644 );MODULE_PARM_DESC (arlan_entry_debug,"Arlan driver function entry debugging" );MODULE_PARM_DESC (arlan_exit_debug,"Arlan driver function exit debugging" );MODULE_PARM_DESC (arlan_entry_and_exit_debug,"Arlan driver function entry and exit debugging" ); -#else -MODULE_PARM_DESC (arlan_entry_debug,"(ignored)" ); -MODULE_PARM_DESC (arlan_exit_debug,"(ignored)" ); -MODULE_PARM_DESC (arlan_entry_and_exit_debug,"(ignored)" );#endif struct arlan_conf_stru arlan_conf[MAX_ARLANS ];
Signature · 5 lines
~Randy _______________________________________________ Kernel-janitors mailing list [email protected] http://lists.osdl.org/mailman/listinfo/kernel-janitors
Quoted 10 lines · Randy.Dunlap
Did you at least make sure that (e.g.)
int debug;
is in the source file *before*
module_param(debug, bool, 0644);This wasn't required for
MODULE_PARM()-- i.e., it's different formodule_param().
Yes, I did. I always put variable declarations first, and parameter declarations shortly after.
stefan
Signature · 2 lines
Give me a fish and I will eat today. Teach me to fish and I will eat forever.
_______________________________________________
Kernel-janitors mailing list
[email protected]
http://lists.osdl.org/mailman/listinfo/kernel-janitors