Skip to contentSkip to conversation

maybe OT, Linux TCP programming

LARTC Damjan 2 participants 2 messages Nov 10, 2004 – Nov 13, 2004

lore
Share & tools
lore

Damjan

author
#0 lore raw

Is there a way in Linux socket programming, when using TCP sockets to be able to require notifications of when the TCP ACK packets are received.

If I send some data over a TCP socket, I'd like to know for sure if the data reached its recipient. A blocking "send" call, that blocks until all ACK's for the data are received back, would be good enough.

Signature · 5 lines
damjan | дамјан
This is my jabber ID --> [email protected] <-- not my mail address!!!
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 6 lines · Damjan

Is there a way in Linux socket programming, when using TCP sockets to be able to require notifications of when the TCP ACK packets are received.

If I send some data over a TCP socket, I'd like to know for sure if the data reached its recipient. A blocking "send" call, that blocks until all ACK's for the data are received back, would be good enough.

If you want that, you have to make your own 'tcp' with UDP. Another solution is to set a very small window size, select(2) will then return on reception on the ACK. Set the window size to one packet in that case (~1500 bytes).

Good luck!

Signature · 5 lines
http://www.PowerDNS.com      Open source, database driven DNS Software 
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/