Support for backplane on the Toshiba 4400 board

PATCH New Manish Lachwani 1 participant 1 message Nov 13, 2004 MIPS

lore

Share & tools

lore

Manish Lachwani

author

2004-11-13 03:18 UTC #0 lore raw

PATCH 1/1 Support for backplane on the Toshiba 4400 board

Hi Ralf

Attached patch implements support for backplane on the TX4927 based board. Tested using PCI and IDE on the backplane. Please review ...

Thanks
Manish Lachwani

Source: MontaVista Software, Inc. | http://www.mvista.com | Manish Lachwani <[email protected]>
Type: Enhancement
Disposition: Submitted to Linux-MIPS
Description:
Support for Backplane on the Toshiba 4400. Tested using
PCI and IDE on the backplane

arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +1 -9

Index: linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
===================================================================
@@ -337,7 +337,6 @@
 	return (sw_irq);
 }
 
-//#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL }
 #define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, SA_SHIRQ, CPU_MASK_NONE, s, NULL, NULL }
 static struct irqaction toshiba_rbtx4927_irq_ioc_action =
 TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_IOC_NAME);

@@ -513,7 +512,7 @@
 
 
 #ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init toshiba_rbtx4927_irq_isa_init(void)
+void toshiba_rbtx4927_irq_isa_init(void)
 {
 	int i;

@@ -675,13 +674,6 @@
 
 	tx4927_irq_init();
 	toshiba_rbtx4927_irq_ioc_init();
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			toshiba_rbtx4927_irq_isa_init();
-		}
-	}
-#endif
 
 	wbflush();

arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +81 ~~-50~~

155 lines not on this page · raw message