Skip to contentSkip to conversation

2.6 and route nat. Who know what is going on?

DISCUSSION Peter Volkov Alexandrovich 2 participants 3 messages Nov 19, 2004 – Nov 20, 2004

lore
Share & tools
lore
#0 lore raw

Hello.

The problem I have is route nat.

Short question: Must "route nat", mentioned in ip-cref documentation coming with iproute2 package, work with 2.6.9 kernel?

Long question and description of the problem:
There is an appendix C in ip-cref by Alexey Kuznetsov called "Route NAT Status". I've followed this configuration with 2.4.2x kernel and everything works. But now I'm forced to move to 2.6.9 kernel due to new SATA controller in my server. And problem is that it is not working. When I issue:

# ip route nat <inet_ip_address> via <local_ip_address>

I the answer is: RTNETLINK answers: invalid argument

So seems like some option is not enabled in my kernel. Well actually I have all options and suboptions enabled in my kernel configuration under "TCP/IP networking" -> "IP: advanced router".

I've tried 2.6.8.1 kernel. And found out that there exist option "IP: fast network address translation" under "IP: advanced router" that is absent in 2.6.9. When I enable this option the kernel seems to accept my command. My router starts to answer arp requests for <inet_ip_addres>, as it should. But no route DNAT seems to occur. If I add some LOG rule to FORWARD iptables chain I can see packets to <inet_ip_address> being forwarded but not DNATed as it should.

Who supports this route nat code in the kernel? Are they going to support this cool feature or it's deprecated and I should look for other solution? How can this be done???

I've tried to google and I've even tried to find an answer in sources, but with no success also. I've asked about this about in LARTC mailing list, where Anwara suggested me to ask for help on this list.

If this is the wrong place to ask my question or anybody knows the right place for this question, please tell me.

Thank you very much in advance,

Signature · 12 lines
______________________________________

Volkov Peter, <[email protected]>
Moscow State University, Phys. Dep.
______________________________________

NO ePATENTS, eSIGN now on:
http://petition.eurolinux.org
and maybe this helps...

Linux 2.4.26-gentoo-r9 i686
Mobile Intel(R) Celeron(R) CPU 1.60GHz
#1 lore raw
Quoted 2 lines · Peter Volkov Alexandrovich

Short question: Must "route nat", mentioned in ip-cref documentation coming with iproute2 package, work with 2.6.9 kernel?

Support for CONFIG_IP_ROUTE_NAT was removed from the kernel - it has been broken by some networking changes, and nobody bothered to fix it.

See this thread in linux-netdev:

http://marc.theaimsgroup.com/?l=linux-netdev&m=109582576330019&w=2

You can use netfilter (iptables etc.) for NAT and more, but probably it will consume more resources than the old "route nat" code.

#2 lore raw

Re: 2.6 and route nat. Now I know. It's dead.

Quoted 7 lines · Sergey Vlasov
Quoted 2 lines · Peter Volkov Alexandrovich

Short question: Must "route nat", mentioned in ip-cref documentation coming with iproute2 package, work with 2.6.9 kernel?

Support for CONFIG_IP_ROUTE_NAT was removed from the kernel - it has been broken by some networking changes, and nobody bothered to fix it.

Quoted 6 lines

See this thread in linux-netdev:

http://marc.theaimsgroup.com/?l=linux-netdev&m=109582576330019&w=2

You can use netfilter (iptables etc.) for NAT and more, but probably it will consume more resources than the old "route nat" code.

Thank you for your answer. It's really pity. It's very bad.

Signature · 12 lines
______________________________________

Volkov Peter, <[email protected]>
Moscow State University, Phys. Dep.
______________________________________

NO ePATENTS, eSIGN now on:
http://petition.eurolinux.org
and maybe this helps...

Linux 2.4.26-gentoo-r9 i686
Mobile Intel(R) Celeron(R) CPU 1.60GHz