S5 not working, and another problem
Hi all,
i was testing today acpi with 2.6.10-rc2 kernel on my computer.
0)
there are difference with dmesg and /proc/acpi/sleep
dmesg::
ACPI: (supports S0 S1 S4bios S5)
cat /proc/acpi/sleep ::
S0 S1 S4 S4bios S5
feature or error ?
1)
echo 1 > /proc/acpi/sleep
echo 4 > /proc/acpi/sleep
echo 4b > /proc/acpi/sleep
this states working fine. only problem with emu10k1 chip (no support, but no freeze). module snd-via82xxx freeze with S1,S4 computer (reported today to alsa-devel list).
echo 5 > /proc/acpi/sleep not working.
i look in the log and no information.
button and command "poweroff" work good.
2) i look in the difference of dmesg (2.6.10-rc1->2.6.10-rc2):
ignore ext3-fs recovery.
1c1
< Linux version 2.6.10-rc1 (root@prog3) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #6 Fri Oct 29 20:59:56 CEST 2004
---
Quoted 1 line
Linux version 2.6.10-rc2 (root@prog3) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 Wed Nov 17 20:52:04 CET 2004
21c21
< Kernel command line: BOOT_IMAGE=2.6.10-rc1 ro root=302
---
Quoted 1 line
Kernel command line: BOOT_IMAGE=2.6.10-rc2 ro root=302
29c29
< Memory: 385244k/393152k available (2592k kernel code, 7376k reserved, 883k data, 152k init, 0k highmem)
---
Quoted 1 line
Memory: 385104k/393152k available (2667k kernel code, 7516k reserved, 939k data, 164k init, 0k highmem)
42a43,46
Quoted 4 lines
tbxface-0117 [02]
acpi_load_tables: ACPI Tables successfully acquired
Parsing all Control Methods:.................................................................... Table [DSDT](id F004) - 281 Objects with 27 Devices 68 Methods 18 Regions
ACPI Namespace successfully loaded at rootc04c6ba0
43a48
Quoted 1 line
evxfevnt-0093 [03]
acpi_enable: Transition to ACPI mode successful
48c53,59
< ACPI: Subsystem revision 20040816
---
Quoted 7 lines
ACPI: Subsystem revision 20041105
evgpeblk-0979 [06]ev_create_gpe_block: GPE 00 to 0F [_GPE] 2 regs on int0x9
evgpeblk-0987 [06]ev_create_gpe_block: Found 3 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:....................................... Initialized 18/18 Regions 1/1 Fields 16/16 Buffers 4/6 Packages (290 nodes) Executing all Device_STAand_INImethods:..............................
30 Devices found containing: 30_STA, 1_INImethods
58a70,73
Quoted 4 lines
pnp: PnP ACPI init
acpi_bus-0077 [03]acpi_bus_get_device: Error getting context for object [c13738fc]
acpi_bus-0077 [03]acpi_bus_get_device: Error getting context for object [c13736e8]
pnp: PnP ACPI: found 12 devices
62,72c77,83
< ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
< ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 < ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10 < ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
< ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11 < ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
< ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 < ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10 < ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
< ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 < ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
---
Quoted 7 lines
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to callpci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected] ** so I can fix the driver.
83a95,96
Quoted 2 lines
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
139,142d151
< EXT3-fs: INFO: recovery required on readonly filesystem.
< EXT3-fs: write access will be enabled during recovery.
< (fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 512905 to 512932 < (fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 1124 and revoked 0/8 blocks
144d152
< EXT3-fs: recovery complete.
147c155
< Freeing unused kernel memory: 152k freed
---
Quoted 1 line
Freeing unused kernel memory: 164k freed
154c162,165
< ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
---
Quoted 4 lines
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
158a170
Quoted 1 line
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
171c183,184
< ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
---
Quoted 2 lines
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Processor [CPU0] (supports 2 throttling states)
for information and testing (disk non destructive) contact me.
sorry for my bad english. thank for your time.
bye
pavel kysilka
programmer http://www.bsys.cz/
________ Information from NOD32 ________
This message was checked by NOD32 Antivirus System for Linux Mail Server.
-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE FREE OODBMS DOWNLOAD - A multidimensional database that combines robust object and relational technologies, making it a perfect match for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
Hi!
Quoted 5 lines
i was testing today acpi with 2.6.10-rc2 kernel on my computer.
0)
there are difference with dmesg and/proc/acpi/sleep
Quoted 7 lines
dmesg::
ACPI: (supports S0 S1 S4bios S5)cat
/proc/acpi/sleep::
S0 S1 S4 S4bios S5feature or error ?
Feature.
Pavel
Signature · 9 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl! ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/