Skip to contentSkip to conversation

2.6: drivers/video/aty/xlinit.c unused

DISCUSSION Adrian Bunk 3 participants 3 messages Nov 21, 2004 – Nov 22, 2004

lore
Share & tools
lore
#0 lore raw

It seems drivers/video/aty/xlinit.c should be used with CONFIG_FB_ATY_XL_INIT, but currently, it's under no circumstances compiled...

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#1 lore raw
Quoted 3 lines · Adrian Bunk

It seems drivers/video/aty/xlinit.c should be used with CONFIG_FB_ATY_XL_INIT, but currently, it's under no circumstances compiled...

It's supposed to boot XL cards without using the BIOS.

If nobody complains, I'll remove it.

Thanks.

Tony

#2 lore raw

Hi,

Am Montag, 22. November 2004 01:21 schrieb Antonino A. Daplas:

Quoted 8 lines · Adrian Bunk
Quoted 3 lines

It seems drivers/video/aty/xlinit.c should be used with CONFIG_FB_ATY_XL_INIT, but currently, it's under no circumstances compiled...

It's supposed to boot XL cards without using the BIOS.

If nobody complains, I'll remove it.

why not making it work? I have some of these cards here that I never got working in my Mac or my Powerstack (both PPC).
Or should it be removed to make room for a "general early boot video initialisation infrastructure", which was discussed here some weeks ago?

Greetings

Marc