multiple providers
Hello, I just stumbled across LARTC and am really excited beacuse i think this is exactly what I needed. Several friends of mine are within wlan range of each other and we all have our own cable modem connections. We wanted to 'bind' our connections together so that if one user wasnt using his connection his bandwidth would be split between the remaining users. How would i go about doing this? At this time their are 5-7 people wanting to be a part of this, but 30-50 people will want to join in once we get things working. Any ideas will be greatly appreciated. Thanks in advance.
Signature · 9 lines
____________________________________________ http://www.operamail.com Get OperaMail Premium today - USD 29.99/year Powered by Outblaze _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · kmon fox
Hello, I just stumbled across LARTC and am really excited beacuse i think this is exactly what I needed. Several friends of mine are within wlan range of each other and we all have our own cable modem connections. We wanted to 'bind' our connections together so that if one user wasnt using his connection his bandwidth would be split between the remaining users. How would i go about doing this? At this time their are 5-7 people wanting to be a part of this, but 30-50 people will want to join in once we get things working. Any ideas will be greatly appreciated. Thanks in advance.
Unfortunately, I don't think it would really be worth the effort. You could setup some routing and QoS on everyone's gateways to allow for a type of fail-over situtation, where if your connection was down you could use other peoples' bandwidth.
I can't think of any way for your gateway to know when its bandwidth was all used up, and start trying WLAN routes - maybe someone else does though.
And trying to set it up with 5-7 (30-50) peoples routes would be a nightmare to try and track who was utilising all their bandwidth and who wasn't.
You'd need some kind of dynamic routing protocol that knew about QoS.
that's my 2c worth.
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Damion de Soto
Quoted 8 lines · kmon fox
Hello, I just stumbled across LARTC and am really excited beacuse i think this is exactly what I needed. Several friends of mine are within wlan range of each other and we all have our own cable modem connections. We wanted to 'bind' our connections together so that if one user wasnt using his connection his bandwidth would be split between the remaining users. How would i go about doing this? At this time their are 5-7 people wanting to be a part of this, but 30-50 people will want to join in once we get things working. Any ideas will be greatly appreciated. Thanks in advance.
Unfortunately, I don't think it would really be worth the effort.
nonsense. This will be an excellent little network, and very exciting too.
google for "policy routing book" - there is an example in there somewhere.
/steve
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Unfortunately, I don't think it would really be worth the effort.
I agree with you Steve. I am working in the same project (wireless, my case) but now
i don't have any document to send. So if you are patient i will send you all i have.
Policies, test, and everything.
So i only can say "be patient".
Best regards.
Sebastian A. Aresca
Quoted 8 lines
Hello, I just stumbled across LARTC and am really excited beacuse i think this is exactly what I needed. Several friends of mine are within wlan range of each other and we all have our own cable modem connections. We wanted to 'bind' our connections together so that if one user wasnt using his connection his bandwidth would be split between the remaining users. How would i go about doing this? At this time their are 5-7 people wanting to be a part of this, but 30-50 people will want to join in once we get things working. Any ideas will be greatly appreciated. Thanks in
advance.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · Sebastian A. Aresca
Quoted 1 line
Unfortunately, I don't think it would really be worth the effort.
I agree with you Steve. I am working in the same project (wireless, my case)
ahhh, as am I..
Quoted 6 lines
but now
i don't have any document to send. So if you are patient i will send you all i have.
Policies, test, and everything.So i only can say "be patient".
I can be patient about something like that.. 8-)
Better still, perhaps we can work together. I have a couple of things built so far that may benefit you, and probably vice-versa.
/steve
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
I have Mandrake 10.0 (official). I have read the section in lartc about "Routing for multiple uplinks/providers", but still I have some queries below.
I have a DSL connection where they give pppoe which is directly terminated into eth1 of my Linux box. Now I have another machine connected to dial-up and it is on same LAN connected to eth0 of Linux box. Now, can I use both these bandwidths (this is a test exercise to understand lartc) and do sort of load balancing? Is there any patching needed for my kernel? How do I make sure that indeed both the lines are used?
Thanks a lot for any help in advance.
With warm regards,
-Payal
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/