Skip to contentSkip to conversation

USB: uhci.c poll for wakeup events

PATCH Pete Zaitcev 1 participant 1 message Nov 24, 2004

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Forwarded from: Alan Stern

This patch causes the uhci driver in 2.4 to wake up the controller when the root-hub polling loop detects a connect change event. Normally the wakeup is handled by an interrupt, but it turns out the recent Genesys Logic GL880S UHCI controller is defective and does not generate the necessary IRQ. With this patch the controller becomes useable.

[P3: The usb-uhci is not affected, apparently.]

drivers/usb/host/uhci.c renamed from drivers/usb/host/uhci.c.orig +2 -0
@@ -1981,6 +1981,8 @@
 	if ((data > 0) && (uhci->rh.send != 0)) {
 		dbg("root-hub INT complete: port1: %x port2: %x data: %x",
 			inw(io_addr + USBPORTSC1), inw(io_addr + USBPORTSC2), data);
+		if (uhci->is_suspended)
+			wakeup_hc(uhci);
 		uhci_call_completion(urb);
 	}