k 2.6.9: ub module causes /dev/sda and /dev/sda1 not being created
I had problems with my pen drive.
Module ub (autolodaded) recognized the pendrive. So /dev/sda and /dev/sda1 didn't get created. After removing ub module from kernel config I could mount the pen drive as /dev/sda1.
* Paulo da Silva <[email protected]>:
Quoted 4 lines
I had problems with my pen drive.
Module ub (autolodaded) recognized the pendrive. So/dev/sdaand/dev/sda1didn't get created. After removing ub module from kernel config I could mount the pen drive as/dev/sda1.
Yes, that bit me with CF card reader too. AFAICS The Right Solution is to create /dev/ub -devices and use them.
Following worked for me:
- -
mknod /dev/uba b 125 0
mknod /dev/uba1 b 125 1
mknod /dev/uba2 b 125 2
mknod /dev/ubb b 125 8
mknod /dev/ubb1 b 125 9
mknod /dev/ubb2 b 125 10
mknod /dev/ubc b 125 16
mknod /dev/ubc1 b 125 17
mknod /dev/ubc2 b 125 18
- -
/dev/sda1 becomes /dev/uba1 etc.
There is a notion that 125 -major number will be going away?:
<https://lists.one-eyed-alien.net/pipermail/usb-storage/2004-August/000709.html>
Signature · 1 line
Psi -- <http://www.iki.fi/pasi.savolainen>
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 2 lines · Pasi Savolainen
There is a notion that 125 -major number will be going away?:
<https://lists.one-eyed-alien.net/pipermail/usb-storage/2004-August/000709.html>
Yes, it has to go. I have received number 180 from LANANA.
I am sorry for the delay. My original plan was to use dynamic majors, but a few people wanted to use ub on systems with 2.6 kernels but without hald or udev, so a static major was needed. In such a case, it has to be non-conflicting.
-- Pete