Logging the whole packet
Is it possible to log the packet body and not just the header?
Currently I have this line in my iptables start-up file:
/sbin/iptables -I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j LOG --log-prefix="Packet_Filter:"
And it generates log entries such as this:
Nov 23 16:44:28 athop1 kernel: Packet_Filter:IN=eth0 OUT= MAC=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00 SRC=64.81.214.131 DST=128.173.120.79 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=29621 DF PROTO=TCP SPT=60366 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
I'd like to capture the packet body as well. I'm new to packet logging so forgive me if I'm over looking the obvious.
Thanks,
Brad
Quoted 9 lines · Brad Tilley
Is it possible to log the packet body and not just the header?
Currently I have this line in my iptables start-up file:
/sbin/iptables-I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j LOG --log-prefix="Packet_Filter:"And it generates log entries such as this:
Quoted 7 lines
Nov 23 16:44:28 athop1 kernel: Packet_Filter:IN=eth0 OUT=MAC=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00 SRC=64.81.214.131 DST=128.173.120.79 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=29621 DF PROTO=TCP SPT=60366 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
I'd like to capture the packet body as well. I'm new to packet logging so forgive me if I'm over looking the obvious.
AFAIK, the normal LOG target cannot actually do this. instead, use the ULOG target which will copy the entire packet to the userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to create a tcpdump file of the packets you are interested in. check out:
http://gnumonks.org/gnumonks/projects/project_details?p_id=1
for more details about ulogd.
HTH...
-j
--
"Television! Teacher, mother, secret lover."
--The Simpsons
Quoted 26 lines · Jason Opperisano
Quoted 4 lines · Brad Tilley
Is it possible to log the packet body and not just the header?
Currently I have this line in my iptables start-up file:
Quoted 9 lines
/sbin/iptables-I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j LOG --log-prefix="Packet_Filter:"And it generates log entries such as this:
Nov 23 16:44:28 athop1 kernel: Packet_Filter:IN=eth0 OUT= MAC=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00 SRC=64.81.214.131 DST=128.173.120.79 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=29621 DF PROTO=TCP SPT=60366 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0I'd like to capture the packet body as well. I'm new to packet logging so forgive me if I'm over looking the obvious.
AFAIK, the normal LOG target cannot actually do this. instead, use the ULOG target which will copy the entire packet to the userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to create a tcpdump file of the packets you are interested in. check out:
http://gnumonks.org/gnumonks/projects/project_details?p_id=1
for more details about ulogd.
Quoted 11 lines
HTH...
-j
--
"Television! Teacher, mother, secret lover."
--The Simpsons
Thanks, that works great. I had to recompile the kernel to get ULOG support, but other than that, it's rather straightforward. I added this line to my iptables startup script:
/sbin/iptables -I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j ULOG --ulog-prefix "Packet_Filter:"
I'm using the /usr/lib/ulogd/ulogd_OPRINT.so plugin to write the packet capture to a file for now. Here's a sample of what it looks like:
===>PACKET BOUNDARY
tcp.fin=0
tcp.syn=1
tcp.rst=0
tcp.psh=0
tcp.ack=0
tcp.urg=0
tcp.window=64240
tcp.ackseq=0
tcp.seq=4245420361
tcp.dport=445
tcp.sport=2797
ip.fragoff=16384
ip.id=11011
ip.csum=2618
ip.ihl=5
ip.totlen=48
ip.ttl=111
ip.tos=0
ip.protocol=6
ip.daddr=128.173.120.79
ip.saddr=63.231.157.167
oob.out=
oob.in=eth0
oob.mark=0
oob.time.usec=213408
oob.time.sec=1101257132 oob.prefix=Packet_Filter:
raw.pktlen=48 raw.pkt=raw.mac=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00
Now, all I need to do is figure out what's in the packet body. Any pointers on that? Ideally I'd like to write a script that recreates keystrokes from packets that contain ssh session info. Probably off-topic here, but I thought I'd ask. Thanks for the ULOG tip!
Quoted 77 lines · Brad Tilley
Quoted 22 lines · Jason Opperisano
Quoted 4 lines · Brad Tilley
Is it possible to log the packet body and not just the header?
Currently I have this line in my iptables start-up file:
Quoted 8 lines
/sbin/iptables-I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j LOG --log-prefix="Packet_Filter:"And it generates log entries such as this:
Nov 23 16:44:28 athop1 kernel: Packet_Filter:IN=eth0 OUT= MAC=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00 SRC=64.81.214.131 DST=128.173.120.79 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=29621 DF PROTO=TCP SPT=60366 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0I'd like to capture the packet body as well. I'm new to packet logging so forgive me if I'm over looking the obvious.
AFAIK, the normal LOG target cannot actually do this. instead, use the ULOG target which will copy the entire packet to the userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to create a tcpdump file of the packets you are interested in. check out:
Quoted 15 lines
http://gnumonks.org/gnumonks/projects/project_details?p_id=1
for more details about ulogd.
HTH...
-j
Signature · 2 lines
"Television! Teacher, mother, secret lover." --The SimpsonsThanks, that works great. I had to recompile the kernel to get ULOG support, but other than that, it's rather straightforward. I added this line to my iptables startup script:
/sbin/iptables-I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j ULOG --ulog-prefix "Packet_Filter:"I'm using the
/usr/lib/ulogd/ulogd_OPRINT.soplugin to write the packet capture to a file for now. Here's a sample of what it looks like:===>PACKET BOUNDARY
tcp.fin=0
tcp.syn=1
tcp.rst=0
tcp.psh=0
tcp.ack=0
tcp.urg=0
tcp.window=64240
tcp.ackseq=0
tcp.seq=4245420361
tcp.dport=445
tcp.sport=2797
ip.fragoff=16384
ip.id=11011
ip.csum=2618
ip.ihl=5
ip.totlen=48
ip.ttl=111
ip.tos=0
ip.protocol=6
ip.daddr=128.173.120.79
ip.saddr=63.231.157.167
oob.out=
oob.in=eth0
oob.mark=0
oob.time.usec=213408
oob.time.sec=1101257132 oob.prefix=Packet_Filter:
raw.pktlen=48 raw.pkt=raw.mac=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00
Quoted 4 lines
Now, all I need to do is figure out what's in the packet body. Any pointers on that? Ideally I'd like to write a script that recreates keystrokes from packets that contain ssh session info. Probably off-topic here, but I thought I'd ask. Thanks for the ULOG tip!
I figured it out. BTW, I meant telnet sessions, not ssh... didn't want y'all to think I'm a complete idiot.
Brad
Quoted 1 line · Jason Opperisano
Quoted 1 line
AFAIK, the normal LOG target cannot actually do this. instead, use
the ULOG target which will copy the entire packet to the
Quoted 1 line
Quoted 1 line
userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to
create a tcpdump file of the packets you are
Quoted 1 line
Quoted 1 line
interested in.
I also would like to log the packet data. In fact, I would like to monitor NFS Write calls.
However, using ULOG and copying all packets to user space is time consuming.
I have no interest in Read calls which is most of the traffic. Does iptables provide a tool to filtering packets by looking at the data ?
Thanks,
Israel
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Opperisano
Sent: Wednesday, November 24, 2004 12:12 AM
To: [email protected]
Subject: Re: Logging the whole packet
Quoted 10 lines · Brad Tilley
Is it possible to log the packet body and not just the header?
Currently I have this line in my iptables start-up file:
/sbin/iptables-I INPUT -p tcp -s ! 128.173.120.79 -d 128.173.120.79 -j
LOG --log-prefix="Packet_Filter:"And it generates log entries such as this:
Quoted 7 lines
Nov 23 16:44:28 athop1 kernel: Packet_Filter:IN=eth0 OUT=MAC=00:30:6e:5e:a2:0c:00:d0:01:ab:44:00:08:00 SRC=64.81.214.131 DST=128.173.120.79 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=29621 DF PROTO=TCP SPT=60366 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0
I'd like to capture the packet body as well. I'm new to packet logging so forgive me if I'm over looking the obvious.
AFAIK, the normal LOG target cannot actually do this. instead, use the ULOG target which will copy the entire packet to the userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to create a tcpdump file of the packets you are interested in. check out:
http://gnumonks.org/gnumonks/projects/project_details?p_id=1
for more details about ulogd.
HTH...
-j
--
"Television! Teacher, mother, secret lover."
--The Simpsons
Quoted 16 lines · israel Gold
Quoted 1 line · Jason Opperisano
Quoted 1 line
AFAIK, the normal LOG target cannot actually do this. instead, use
the ULOG target which will copy the entire packet to the
Quoted 1 line
Quoted 1 line
userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to
create a tcpdump file of the packets you are
Quoted 1 line
Quoted 1 line
interested in.
I also would like to log the packet data. In fact, I would like to monitor NFS Write calls.
However, using ULOG and copying all packets to user space is time consuming.
I have no interest in Read calls which is most of the traffic. Does iptables provide a tool to filtering packets by looking at the data ?
Quoted 2 lines
Thanks,
Israel
iptables is a firewall; not a high performance packet capturing tool.
you guys ever heard of tcpdump? snort?
-j
--
"They think they're so high and mighty, just because they never got
caught driving without pants."
--The Simpsons
Jason you correct,
I am looking for tool that is capable of real-time protocol analysis and content matching. SNORT seems to be more appropriate. Thank you for the tip.
Israel.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Jason Opperisano
Sent: Wednesday, November 24, 2004 4:59 PM
To: [email protected]
Subject: RE: Logging the whole packet
Quoted 5 lines · israel Gold
Quoted 1 line · Jason Opperisano
Quoted 1 line
AFAIK, the normal LOG target cannot actually do this. instead, use
the ULOG target which will copy the entire packet to the
Quoted 1 line
Quoted 1 line
userspace ulogd daemon where you can use the ulogd_PCAP.so plugin to
Quoted 8 lines
create a tcpdump file of the packets you are
Quoted 1 line
Quoted 1 line
interested in.
I also would like to log the packet data. In fact, I would like to monitor NFS Write calls. However, using ULOG and copying all packets to user space is time consuming.
I have no interest in Read calls which is most of the traffic. Does iptables provide a tool to filtering packets by looking at the
data
Quoted 4 lines
?
Thanks,
Israel
iptables is a firewall; not a high performance packet capturing tool.
you guys ever heard of tcpdump? snort?
-j
--
"They think they're so high and mighty, just because they never got caught driving without pants."
--The Simpsons