2.6.10-rc2-mm3
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Andrew Morton
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc2/2.6.10-rc2-mm3/
Problem with
/sys/bus/i2c/devicesempty.I am running a 2.10-rc2-mm3 kernel with a couple pathes (unrelated to i2c). It shows me an empty directory in
/sys/bus/i2c/devices, even if I have all suitable modules loaded:
Are you sure these are the proper modules for this system?
Quoted 10 lines
Module Size Used by w83627hf 24224 0 i2c_dev 8192 0 i2c_sensor 3328 1 w83627hf i2c_isa 2304 0 i2c_i801 7692 0 i2c_core 18560 5 w83627hf,i2c_dev,i2c_sensor,i2c_isa,i2c_i801On boxes running 2.6.9, the devices are present with the same module list (different adapters)
Ah, but what about 2.6.9 on this same machine? Are you sure that the i2c_i801 driver is the proper one for this box? How about the w83627hf driver? Are you sure that chip is on it?
Have you tried running sensors-detect to determine what drivers are needed?
thanks,
greg k-h
Quoted 5 lines · Greg KH
Quoted 5 lines · Andrew Morton
Quoted 3 lines
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc2/2.6.10-rc2-mm3/
Quoted 8 lines
Quoted 5 lines
Problem with
/sys/bus/i2c/devicesempty.I am running a 2.10-rc2-mm3 kernel with a couple pathes (unrelated to i2c). It shows me an empty directory in
/sys/bus/i2c/devices, even if I have all suitable modules loaded:Are you sure these are the proper modules for this system?
The same /etc/sysconfig/lm_sensors has been working for many 2.6 kernels ;)
Quoted 8 lines
Quoted 8 lines
Module Size Used by w83627hf 24224 0 i2c_dev 8192 0 i2c_sensor 3328 1 w83627hf i2c_isa 2304 0 i2c_i801 7692 0 i2c_core 18560 5 w83627hf,i2c_dev,i2c_sensor,i2c_isa,i2c_i801
Quoted 4 lines
Quoted 2 lines
On boxes running 2.6.9, the devices are present with the same module list (different adapters)
Ah, but what about 2.6.9 on this same machine? Are you sure that the
See below. I booted again on 2.6.9-jam1 (mm1 with fixes collected from LKML).
Quoted 3 lines
i2c_i801driver is the proper one for this box? How about the w83627hf driver? Are you sure that chip is on it?
I updated my sensors userspace to latest cvs to check if some kind of de-synchronisation was the cause:
werewolf:~> sensors -v
sensors version 2.9.0-CVS with libsensors version 2.9.0-CVS
sensors-detect on 2.6.9-mm1:
Now follows a summary of the probes I have just done. Just press ENTER to continue:
Driver `to-be-written' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 0500' (Algorithm unavailable)
Busdriver `i2c-i801', I2C address 0x2f (and 0x48 0x49)
Chip `Winbond W83792D' (confidence: 8)Driver `smbus-arp' (should be inserted):
Detects correctly:
* Bus SMBus I801 adapter at 0500' (Algorithm unavailable) Busdriver i2c-i801', I2C address 0x61
Chip `SMBus 2.0 ARP-Capable Device' (confidence: 1)
Driver `it87' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE IT8705F / IT8712F / SiS 950' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver i2c-isa') Chip Winbond W83627THF Super IO Sensors' (confidence: 9)
To make the sensors modules behave correctly, add these lines to /etc/modules.conf:
#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----
To load everything that is needed, add this to some /etc/rc* file:
#----cut here----
# I2C adapter drivers
modprobe i2c-i801
modprobe i2c-isa
# I2C chip drivers
# no driver for Winbond W83792D yet modprobe smbus-arp modprobe w83627hf # sleep 2 # optional /usr/local/bin/sensors -s # recommended #----cut here----
With this modules (no smbus-arp):
w83627hf 25128 0 eeprom 7072 0 i2c_sensor 3456 2 w83627hf,eeprom i2c_isa 2304 0 i2c_i801 7820 0 i2c_core 19712 5 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_i801
I can see this:
werewolf:~> ls /sys/bus/i2c/devices
0-0050@ 0-0052@ 1-0290@
Now, 2.6.10-rc2-mm3:
Driver `to-be-written' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 0500' (Algorithm unavailable)
Busdriver `i2c-i801', I2C address 0x2f (and 0x48 0x49)
Chip `Winbond W83792D' (confidence: 8)Driver `smbus-arp' (should be inserted):
Detects correctly:
* Bus SMBus I801 adapter at 0500' (Algorithm unavailable) Busdriver i2c-i801', I2C address 0x61
Chip `SMBus 2.0 ARP-Capable Device' (confidence: 1)
Driver `it87' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `ITE IT8705F / IT8712F / SiS 950' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver i2c-isa') Chip Winbond W83627THF Super IO Sensors' (confidence: 9)
With same modules inserted:
w83627hf 24224 0 eeprom 6168 0 i2c_sensor 3328 2 w83627hf,eeprom i2c_isa 2304 0 i2c_i801 7692 0 i2c_core 18560 6 i2c_dev,w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_i801
werewolf:~# ls /sys/bus/i2c/devices 0-0050@ 0-0052@
So i see the two DIMMS but not the 0x0290 bus.
I'm going to try with the other modules I am missing, smbus-arp and it87, but this setup works in 2.6.9...
If you need any info, just ask for.
Hope this helps. Thanks.
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-rc2-jam3 (gcc 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #1