Remove use of 'mangle' from DNAT/SNAT

PATCH New Phil Oester 1 participant 1 message Nov 30, 2004 netfilter

Share & tools

Phil Oester

author

2004-11-30 01:51 UTC #0 lore raw

PATCH 1/1 Remove use of 'mangle' from DNAT/SNAT

At least one user (via bugzilla) was confused by the use of the word mangle in the man entries for DNAT and SNAT. Might as well clarify it...trivial patch below.

This closes bugzilla #261.

Phil

extensions/libipt_DNAT.man +3 -3

diff -ru ipt-orig/extensions/libipt_DNAT.man ipt-new/extensions/libipt_DNAT.man
@@ -5,9 +5,9 @@
 and
 .B OUTPUT
 chains, and user-defined chains which are only called from those
-chains.  It specifies that the destination address of the packet
-should be modified (and all future packets in this connection will
-also be mangled), and rules should cease being examined.  It takes one
+chains.  It specifies that the destination address of this packet
+(and any future packets associated with this connection) should be
+modified, and rules should cease being examined.  It takes one
 type of option:
 .TP
 .BR "--to-destination " "\fIipaddr\fP[-\fIipaddr\fP][:\fIport\fP-\fIport\fP]"

extensions/libipt_SNAT.man +3 -3

diff -ru ipt-orig/extensions/libipt_SNAT.man ipt-new/extensions/libipt_SNAT.man
@@ -2,9 +2,9 @@
 .B nat
 table, in the
 .B POSTROUTING
-chain.  It specifies that the source address of the packet should be
-modified (and all future packets in this connection will also be
-mangled), and rules should cease being examined.  It takes one type
+chain.  It specifies that the source address of this packet (and any
+future packets associated with this connection) should be modified,
+and rules should cease being examined.  It takes one type
 of option:
 .TP
 .BR "--to-source  " "\fIipaddr\fP[-\fIipaddr\fP][:\fIport\fP-\fIport\fP]"