Build fixes for Broadcom DMA Pageops in 2.6

Index: linux/arch/mips/mm/pg-sb1.c
===================================================================
@@ -162,7 +162,7 @@
 void sb1_dma_init(void)
 {
 	int cpu = smp_processor_id();
-	uint64_t base_val = PHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
+	uint64_t base_val = CPHYSADDR(&page_descr[cpu]) | V_DM_DSCR_BASE_RINGSZ(1);
 
 	__raw_writeq(base_val,
 		     IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_BASE)));

@@ -180,7 +180,7 @@
 	if (KSEGX(page) != CAC_BASE)
 		return clear_page_cpu(page);
 
-	page_descr[cpu].dscr_a = PHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_a = CPHYSADDR(page) | M_DM_DSCRA_ZERO_MEM | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
 	page_descr[cpu].dscr_b = V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
 	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 

@@ -195,16 +195,16 @@
 
 void copy_page(void *to, void *from)
 {
-	unsigned long from_phys = PHYSADDR(from);
-	unsigned long to_phys = PHYSADDR(to);
+	unsigned long from_phys = CPHYSADDR(from);
+	unsigned long to_phys = CPHYSADDR(to);
 	int cpu = smp_processor_id();
 
 	/* if either page is above Kseg0, use old way */
 	if ((KSEGX(to) != CAC_BASE) || (KSEGX(from) != CAC_BASE))
 		return copy_page_cpu(to, from);
 
-	page_descr[cpu].dscr_a = PHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
-	page_descr[cpu].dscr_b = PHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
+	page_descr[cpu].dscr_a = CPHYSADDR(to_phys) | M_DM_DSCRA_L2C_DEST | M_DM_DSCRA_INTERRUPT;
+	page_descr[cpu].dscr_b = CPHYSADDR(from_phys) | V_DM_DSCRB_SRC_LENGTH(PAGE_SIZE);
 	__raw_writeq(1, IOADDR(A_DM_REGISTER(cpu, R_DM_DSCR_COUNT)));
 
 	/*