Skip to contentSkip to conversation

Controlling only few ip addresses

LARTC Amit Vyas 2 participants 2 messages Dec 22, 2004

lore
Share & tools
lore

Amit Vyas

author
#0 lore raw

Hi all,

I think learning curve will decrease if i try to get more info on what i want to do.
I would start with thius problem
Prob #1 I want to give a limited bandwidth to a single IP. and don't allow it to cross its ceil. nor borrow unsed from parent. and allow other ip's to move untouched .

comment on How to it and Best way to do it.

thanks.
Amit

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 10 lines · Amit Vyas

Hi all,

I think learning curve will decrease if i try to get more info on what i want to do.
I would start with thius problem
Prob #1 I want to give a limited bandwidth to a single IP. and don't allow it to cross its ceil. nor borrow unsed from parent. and allow other ip's to move untouched .

comment on How to it and Best way to do it.

The best way to do it, is not like you are doing it :)

We can not answer your question. You really have to understand some basics about shaping before you can proceed. I recommend reading www.lartc.org and visit www.docum.org.

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/