Skip to contentSkip to conversation

2.6.{9,10}: C3 not working once USB driver gets loaded (ThinkPad T40p)

DISCUSSION Tomas Szepe 2 participants 2 messages Dec 26, 2004 – Dec 28, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

In recent kernels (tried 2.6.9, 2.6.10), after I load the uhci_hcd module, the processor never goes to state C3. Unloading the module again puts things back to normal. The system is an IBM ThinkPad T40p.

Is the USB driver setting some kinda flag in the ACPI subsystem to achieve this behavior intentionally or is this a bug?

Thanks,

Signature · 1 line
Tomas Szepe <[email protected]>
#1 lore raw
Quoted 8 lines · Tomas Szepe

Hi,

In recent kernels (tried 2.6.9, 2.6.10), after I load the uhci_hcd module, the processor never goes to state C3. Unloading the module again puts things back to normal. The system is an IBM ThinkPad T40p.

Is the USB driver setting some kinda flag in the ACPI subsystem to achieve this behavior intentionally or is this a bug?

It is not a Linux bug -- it is a system hardware architecture flaw.

There is a workaround for this issue called USB Selective Suspend, which you can google and read all about. Hopefully we'll have this workaround available on Linux systems before too long.

cheers,
-Len