Skip to contentSkip to conversation

wonder shaper and vsftp

LARTC Kinchan 1 participant 1 message Dec 28, 2004

lore
Share & tools
lore

Kinchan

author
#0 lore raw

I have a linux server connecto into a 100mps LAN, i use iptables implementation of shorewall (shorewall.net) and then I used the wondershaper.

When I adjusted the values below, I got a download speed for vsftp at a whooping 1187.91 KB/s but a upload speed is only a painful 27 KB/s.

I dont fully understand the underpinng codes behind the wondershaper htb stuff. can someone guide me on how can i increase my ftp upload speed?

Note: when i disble the firewall, i get a very slow download and upload speed at around 20 KB/s or slower. When I try to enable the firewall and then disable the traffic shaping, I also got a slow download and upload, so I guess the wonder shaper is really doing its job.

here's a snip from my wonder shaper file
#!/bin/bash
# Wonder Shaper

# please read the README before filling out these
values 
#
# Set the following values to somewhat less than your
actual download
# and uplink speed. In kilobits. Also set the device
that is to be shaped.

DOWNLINK�92
UPLINK�92
DEV=eth0

Happy holidays to all. Thanks in advance

xorprime

==Kinchan Cepillo
a.k.a xorprime

Pain is temporary. Pride is forever

__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/