Skip to contentSkip to conversation

hotplug and test and set

DISCUSSION Rainer Dorsch 3 participants 7 messages Jan 1, 2005 – Jan 2, 2005

lore
Share & tools
lore
#0 lore raw

Hello,

I have an Epox DG02A usb dongle for bluetooth.

$ ls usbview
[...]
Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle

I added a script to start pand into my /etc/hotplug.d/usb directory on my Debian system.

rd@topsi:~$ cat /etc/hotplug.d/usb/epox-bluetooth.hotplug
#!/bin/sh
pidfile=/var/run/pand.pid
lockfile=/var/lock/pand.lock
DAEMON=/usr/bin/pand
case `echo $PRODUCT|cut -d / -f 1-2` in
        # a12/1/525 and a12/1/828 have been seen for the Epox BT DB02A
        a12/1) break ;;
        *) exit ;;
esac
case $TYPE in
        224/1/1) break ;;
        *) exit ;;
esac
case $ACTION in
        add)
            # poor man's locking
            if [ ! -e $lockfile ]; then
              touch $lockfile
              echo entered locked area >> /tmp/epox.log
              hcitool scan >> /tmp/epox.log
              sleep 1
              start-stop-daemon --start --exec $DAEMON -- --nodetach --role 
PANU --search --encrypt --pidfile $pidfile
            fi
            ;;
        remove)
            start-stop-daemon --stop --exec $DAEMON --pidfile $pidfile
            rm $lockfile
            ifdown bnep0
            ;;
esac
rd@topsi:~$

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

Many thanks,
Rainer

Signature · 15 lines
Rainer Dorsch
Alzentalstr. 28
D-71083 Herrenberg
07032-919495
Icq: 32550367


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#1 lore raw
Quoted 2 lines · Rainer Dorsch

I added a script to start pand into my /etc/hotplug.d/usb directory on my Debian system.

...

Quoted 2 lines

My problem is that this script is called four times when the dongle is plugged in.

What is in the DEVPATH variable of all four events? I expect you can sort out the right one.

Kay

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#2 lore raw
In reply to Rainer Dorsch
Quoted 4 lines · Rainer Dorsch

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

From http://linux-hotplug.sourceforge.net/?selected=usb:

There are two kinds of usb hotplug event: device, and interface. Kernel 2.6 added device events, as well as reporting the complete set of interface events. You can tell which kind of event by the environment
variables: device events don't include PRODUCT, or any of the other parameters here except DEVPATH and ACTION.

So:

# ignore device events
[ "$PRODUCT" ] || exit 0
Signature · 12 lines
ciao,
Marco


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#3 lore raw
In reply to Rainer Dorsch

Am Sonntag, 2. Januar 2005 02:27 schrieb Marco d'Itri:

Quoted 15 lines · Rainer Dorsch
Quoted 7 lines

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

From http://linux-hotplug.sourceforge.net/?selected=usb:

There are two kinds of usb hotplug event: device, and interface. Kernel 2.6 added device events, as well as reporting the complete set of interface events. You can tell which kind of event by the environment
variables: device events don't include PRODUCT, or any of the other parameters here except DEVPATH and ACTION.

Quoted 4 lines

So:

# ignore device events
[ "$PRODUCT" ] || exit 0

Many thanks for the quick reply.

I added

(date
echo $DEVPATH
echo $PRODUCT
echo $TYPE
echo $ACTION) >> /tmp/epox.log

into the script.

The result is

Sun Jan 2 14:06:32 CET 2005
/devices/pci0000:00/0000:00:07.2/usb1/1-2

add
Sun Jan 2 14:06:32 CET 2005
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
a12/1/525
224/1/1
add
entered locked area
Sun Jan 2 14:06:32 CET 2005
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
a12/1/525
224/1/1
add
Sun Jan 2 14:06:32 CET 2005
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
a12/1/525
224/1/1
add

That means that I should scan for a DEVPATH variable ending with 1.0 (?)

Many thanks,
Rainer

Signature · 15 lines
Rainer Dorsch
Alzentalstr. 28
D-71083 Herrenberg
07032-919495
Icq: 32550367


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#4 lore raw
In reply to Rainer Dorsch
Quoted 23 lines · Rainer Dorsch

Am Sonntag, 2. Januar 2005 02:27 schrieb Marco d'Itri:

Quoted 15 lines · Rainer Dorsch
Quoted 7 lines

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

From http://linux-hotplug.sourceforge.net/?selected=usb:

There are two kinds of usb hotplug event: device, and interface. Kernel 2.6 added device events, as well as reporting the complete set of interface events. You can tell which kind of event by the environment
variables: device events don't include PRODUCT, or any of the other parameters here except DEVPATH and ACTION.

Quoted 4 lines

So:

# ignore device events
[ "$PRODUCT" ] || exit 0

Many thanks for the quick reply.

Quoted 7 lines

/devices/pci0000:00/0000:00:07.2/usb1/1-2
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
a12/1/525

You get one device event and three interface events for this USB device.

Quoted 1 line

That means that I should scan for a DEVPATH variable ending with 1.0 (?)

You may just just match the event for the device. Just add the exit statement Marco suggested and negate it to skip interface events instead.

Kay

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#5 lore raw
In reply to Rainer Dorsch

Am Sonntag, 2. Januar 2005 16:23 schrieb Kay Sievers:

Quoted 32 lines · Rainer Dorsch
Quoted 23 lines

Am Sonntag, 2. Januar 2005 02:27 schrieb Marco d'Itri:

Quoted 15 lines · Rainer Dorsch
Quoted 7 lines

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

From http://linux-hotplug.sourceforge.net/?selected=usb:

There are two kinds of usb hotplug event: device, and interface. Kernel 2.6 added device events, as well as reporting the complete set of interface events. You can tell which kind of event by the environment
variables: device events don't include PRODUCT, or any of the other parameters here except DEVPATH and ACTION.

Quoted 4 lines

So:

# ignore device events
[ "$PRODUCT" ] || exit 0

Many thanks for the quick reply.

Quoted 7 lines

/devices/pci0000:00/0000:00:07.2/usb1/1-2
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
a12/1/525

Quoted 8 lines

You get one device event and three interface events for this USB device.

Quoted 1 line

That means that I should scan for a DEVPATH variable ending with 1.0 (?)

You may just just match the event for the device. Just add the exit statement Marco suggested and negate it to skip interface events instead.

Hmm... $PRODUCT and $TYPE are empty for the interface. Wouldn't that mean that I try to start pand for every usb device?

Thanks,
Rainer

Signature · 15 lines
Rainer Dorsch
Alzentalstr. 28
D-71083 Herrenberg
07032-919495
Icq: 32550367


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#6 lore raw
In reply to Rainer Dorsch
Quoted 37 lines · Rainer Dorsch

Am Sonntag, 2. Januar 2005 16:23 schrieb Kay Sievers:

Quoted 36 lines · Rainer Dorsch
Quoted 23 lines

Am Sonntag, 2. Januar 2005 02:27 schrieb Marco d'Itri:

Quoted 15 lines · Rainer Dorsch
Quoted 7 lines

My problem is that this script is called four times when the dongle is plugged in. I order to avoid to call pand four times, I added a poor test and set to the script to add a lock when a pand is running. Does anybody know, what I could do to get a better locking behaviour, e.g. an atomic test and set?

From http://linux-hotplug.sourceforge.net/?selected=usb:

There are two kinds of usb hotplug event: device, and interface. Kernel 2.6 added device events, as well as reporting the complete set of interface events. You can tell which kind of event by the environment
variables: device events don't include PRODUCT, or any of the other parameters here except DEVPATH and ACTION.

Quoted 4 lines

So:

# ignore device events
[ "$PRODUCT" ] || exit 0

Many thanks for the quick reply.

Quoted 7 lines

/devices/pci0000:00/0000:00:07.2/usb1/1-2
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
a12/1/525
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
a12/1/525

You get one device event and three interface events for this USB device.

Quoted 1 line

That means that I should scan for a DEVPATH variable ending with 1.0 (?)

Quoted 7 lines
Quoted 4 lines

You may just just match the event for the device. Just add the exit statement Marco suggested and negate it to skip interface events instead.

Hmm... $PRODUCT and $TYPE are empty for the interface. Wouldn't that mean that I try to start pand for every usb device?

You are right, sorry. I thought you were using the usermap and not the multiplexer infrastructure.

Kay

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel