HTB + GRED (santa clauss plz help me out)
I 've been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn't use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them.
Tomas Graf suggested to use the tc_index index of u32 classifier
so dear Sant .. i am currently with the following scripts that works!
But when i try to add an HTB before the GRED, everything goes to hell.
tc qdisc add dev $Dev handle 1:0 root dsmark indices 16 set_tc_index tc filter add dev $Dev parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 pass_on
tc filter add dev $Dev parent 1:0 protocol ip prio 1 handle 10 tcindex classid 1:1
tc filter add dev $Dev parent 1:0 protocol ip prio 1 handle 12 tcindex classid 1:2
tc filter add dev $Dev parent 1:0 protocol ip prio 1 handle 14 tcindex classid 1:3
tc qdisc add dev $Dev parent 1:0 gred setup DPs 3 default 30
tc qdisc change dev $Dev parent 1:0 gred limit 6000 min 800 max 1600 burst 12 avpkt 256 bandwidth 10Mbit DP 1probability 0.01
tc qdisc change dev $Dev parent 1:0 gred limit 6000 min 800 max 1600 burst 12 avpkt 256 bandwidth 10Mbit DP 2probability 0.01
tc qdisc change dev $Dev parent 1:0 gred limit 6000 min 800 max 1600 burst 12 avpkt 256 bandwidth 10Mbit DP 3probability 0.01
any ideas guys?
Would really apreciate it
Thanks alg0
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Antonios Chalkiopoulos
I 've been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn't use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them.
Tomas Graf suggested to use the
tc_indexindex of u32 classifierso dear Sant .. i am currently with the following scripts that works!
Have you seen this
http://www.opalsoft.net/qos/DS-27.htm
Though if it works you don't need it :-)
Quoted 2 lines
But when i try to add an HTB before the GRED, everything goes to hell.
You may need to repeat filters to get HTB to go from root to GRED (well you do with PRIO) eg. from a usenet post.
Quoted 6 lines
Hi Everyone
I'm running Fedora Core 2 as a router and am having problems getting the PRIO qdisc to work.
I'm using the Iperf utility to generate traffic flows between
computers on
Quoted 1 line
either side of the Fedora box. I want traffic destined to port 6001
to be
Quoted 10 lines
in band 0, traffic for port 6002 in band 1 and traffic for port 6003 in band 2.
I'm using HTB to restrict the overall bandwidth to 5000 kbit.
So far I've developed the following scripts, based on info I've picked up from the LARTC mailing list archives, man pages and Google searches.
SCRIPT ONE...
Quoted 7 lines
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1: htb default 1
tc class add dev eth1 parent 1: classid 1:1 htb rate 5000kbit tc qdisc add dev eth1 parent 1:1 handle 10: prio
tc filter add dev eth1 parent 1:0 protocol ip handle 1 fw flowid 10:1 tc filter add dev eth1 parent 1:0 protocol ip handle 2 fw flowid 10:2 tc filter add dev eth1 parent 1:0 protocol ip handle 3 fw flowid 10:3
This is the bit that doesn't work as I expected.
Seems HTB doesn't forward direct to prio bands from root so you have to repeat the filters.
Below is what just seemed to work for me - It works without the bfifos aswell but you don't get per band stats with tc -s qdisc ls dev eth0 if you don't have them.
Andy.
IPTABLES=/usr/local/sbin/iptables
MODPROBE=/sbin/modprobe
IP=/usr/sbin/ip
TC=/usr/sbin/tc
$IPTABLES -t mangle -D POSTROUTING --dst 192.168.0.1 -j MARK --set-mark 2 &>/dev/null
$IPTABLES -t mangle -D POSTROUTING --dst 192.168.0.2 -j MARK --set-mark 3 &>/dev/null
$IPTABLES -t mangle -D POSTROUTING -m length --length 0:64 -j MARK --set-mark 1 &>/dev/null
$TC qdisc del dev eth0 root &>/dev/null
if [ "$1" = "stop" ]
then
echo "stopped"
exit
fi
$IPTABLES -t mangle -A POSTROUTING --dst 192.168.0.1 -j MARK --set-mark 2 $IPTABLES -t mangle -A POSTROUTING --dst 192.168.0.2 -j MARK --set-mark 3 $IPTABLES -t mangle -A POSTROUTING -m length --length 0:64 -j MARK --set-mark 1
$TC qdisc add dev eth0 root handle 1:0 htb default 0 $TC class add dev eth0 parent 1:0 classid 1:1 htb rate 5mbit $TC qdisc add dev eth0 parent 1:1 handle 2: prio
$TC qdisc add dev eth0 parent 2:1 handle 10:0 bfifo limit 64k $TC qdisc add dev eth0 parent 2:2 handle 20:0 bfifo limit 64k $TC qdisc add dev eth0 parent 2:3 handle 30:0 bfifo limit 64k
$TC filter add dev eth0 parent 1:0 prio 0 protocol ip handle 1 fw flowid 1:1 $TC filter add dev eth0 parent 1:0 prio 1 protocol ip handle 2 fw flowid 1:1 $TC filter add dev eth0 parent 1:0 prio 2 protocol ip handle 3 fw flowid 1:1
$TC filter add dev eth0 parent 2:0 prio 0 protocol ip handle 1 fw flowid 2:1 $TC filter add dev eth0 parent 2:0 prio 1 protocol ip handle 2 fw flowid 2:2 $TC filter add dev eth0 parent 2:0 prio 2 protocol ip handle 3 fw flowid 2:3
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Dear Andy,
Quoted 10 lines
Quoted 7 lines
I 've been trynig for a long time now to make HTB and GRED to work together. The problem beeing that GRED doesn't use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them.
Tomas Graf suggested to use the
tc_indexindex of u32 classifierso dear Sant .. i am currently with the following scripts that works!
Quoted 5 lines
Have you seen this
http://www.opalsoft.net/qos/DS-27.htm
Though if it works you don't need it :-)
I am aware of it and have spend a few hours trying to make it work... without any success.
Quoted 5 lines
Quoted 2 lines
But when i try to add an HTB before the GRED, everything goes to hell.
You may need to repeat filters to get HTB to go from root to GRED (well you do with PRIO) eg. from a usenet post.
That IS EXCACTLY MY PROBLEM. In the case of ordinary qdiscs i repeat my filters to the new handles (3:1 3:2 etc).
In the case of GRED there are no handles to play with and i am unuable to filter traffic into GRED...
Antonios
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/