Skip to contentSkip to conversation

ca0106 (audigyls) driver: working in 5.1?

DISCUSSION Lenart Janos 2 participants 2 messages Jan 5, 2005

lore
Share & tools
lore
#0 lore raw

Hi!

I have a "Sound Blaster Live! 24 bit 7.1" soundcard. I am happily reporting that analog output to two channels (simple stereo) is fully working (at least for me) with the ca0106 (audigyls) driver. However, I could not get it to work in 6 channels. I looked into the code and got this from the main.c:

/* hardware definition */

static snd_pcm_hardware_t snd_ca0106_playback_hw = {
        ...
	.channels_min =		2,  //1,
	.channels_max =		2,  //6,
	.buffer_bytes_max =	(32*1024),
	.period_bytes_min =	64,
	.period_bytes_max =	(16*1024),
	.periods_min =		2,
	.periods_max =		8,
	.fifo_size =		0,
};

Hmm. Why is the comment for .channels_min and .channels_max? [Please note that I definetly not kernel developer] I tried to change them to 1 and 6. No success. In this case, when I try to play anything in _not_ 2 channels it's seems too slow (the whole box, and the sound too) and distorted. I found out ( ;) ), that I should increase the .period_bytes_{min,max} too. I tried as I found in other driver, but no success so far.
So.. the question is: does anyone have a ca0106 driver which works for 5.1 (I don't care with 7.1), or such just does not exists at all?

Thank you all, and please, do not forgot to Cc: me, as I am not subscribed to this list!

Regards,

Signature · 8 lines
LENART, Janos
<[email protected]>


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
#1 lore raw
Quoted 31 lines · Lenart Janos

Hi!

I have a "Sound Blaster Live! 24 bit 7.1" soundcard. I am happily reporting that analog output to two channels (simple stereo) is fully working (at least for me) with the ca0106 (audigyls) driver. However, I could not get it to work in 6 channels. I looked into the code and got this from the main.c:

/* hardware definition */

static snd_pcm_hardware_t snd_ca0106_playback_hw = {
        ...
	.channels_min =		2,  //1,
	.channels_max =		2,  //6,
	.buffer_bytes_max =	(32*1024),
	.period_bytes_min =	64,
	.period_bytes_max =	(16*1024),
	.periods_min =		2,
	.periods_max =		8,
	.fifo_size =		0,
};

Hmm. Why is the comment for .channels_min and .channels_max? [Please note that I definetly not kernel developer] I tried to change them to 1 and 6. No success. In this case, when I try to play anything in _not_ 2 channels it's seems too slow (the whole box, and the sound too) and distorted. I found out ( ;) ), that I should increase the .period_bytes_{min,max} too. I tried as I found in other driver, but no success so far.
So.. the question is: does anyone have a ca0106 driver which works for 5.1 (I don't care with 7.1), or such just does not exists at all?

Quoted 4 lines

Thank you all, and please, do not forgot to Cc: me, as I am not subscribed to this list!

Regards,

Hehe, the comments should not be there.
If you want 5.1 output, open the alsa device name "plug:surround51" instead of "default" or "plug:front" that give only stereo.

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt