SDP & RFCOMM SYNC
Hi frds,
I am working over SDP layer & i want to suport multiple profile over rfcomm.
I want to know how I can implement the following situation.
Already there is one rfcomm (ACL) connection with the remote device by a profile .Other profile wants to make sdp session with the same device.How can we send query request over the l2cap chanel?
If so, wat will happen after if sdp sends a disconnect request after query?
Regards
Amit
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann
maintainerHi Amit,
Quoted 9 lines
I am working over SDP layer & i want to suport multiple profile over rfcomm.
I want to know how I can implement the following situation.
Already there is one rfcomm (ACL) connection with the remote device by a profile .Other profile wants to make sdp session with the same device.How can we send query request over the l2cap chanel?
If so, wat will happen after if sdp sends a disconnect request after query?
this simply works. The kernel is able to handle multiple L2CAP and RFCOMM connections without any problems.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Marcel,
can u explain how it is possible?
Because only one l2cap connection is possible over a ACL connection (between 2 devices).
According to SDP specification, SDP seesion first issue a SDP connect, send SDP query, wait for response and then send SDP disconnect.
if we start a SDP session, What will happen with the l2cap
connection, over which 1( or more ) rfcomm session is running?
Should l2cap implementation provide a support for this or SDP should check for that?
if so how to implement this at the l2cap level?
Regards
Amit
Quoted 19 lines · Marcel Holtmann
Hi Amit,
Quoted 9 lines
I am working over SDP layer & i want to suport multiple profile over rfcomm.
I want to know how I can implement the following situation.
Already there is one rfcomm (ACL) connection with the remote device by a profile .Other profile wants to make sdp session with the same device.How can we send query request over the l2cap chanel?
If so, wat will happen after if sdp sends a disconnect request after query?
this simply works. The kernel is able to handle multiple L2CAP and RFCOMM connections without any problems.
Regards
Marcel
Quoted 9 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Hi Amit,
l2cap is a multiplexer protocol, which means that every l2cap connection has a different "channel". Each upper layer Protocol uses a different PSM (protocol service multiplexer). If I remeber right the PSM for RFCOMM is 3 and 2 for SDP. If you conect a RFCOMM session this is completly independent from a SDP session. Check l2cap protocoll specification.
Ciao,
Peter
Quoted 52 lines · Amit Kumar Goel
Hi Marcel,
can u explain how it is possible?
Because only one l2cap connection is possible over a ACL connection (between 2 devices).
According to SDP specification, SDP seesion first issue a SDP connect, send SDP query, wait for response and then send SDP disconnect.
if we start a SDP session, What will happen with the l2cap
connection, over which 1( or more ) rfcomm session is running?Should l2cap implementation provide a support for this or SDP should check for that?
if so how to implement this at the l2cap level?
Regards
AmitQuoted 19 lines · Marcel Holtmann
Hi Amit,
Quoted 9 lines
I am working over SDP layer & i want to suport multiple profile over rfcomm.
I want to know how I can implement the following situation.
Already there is one rfcomm (ACL) connection with the remote device by a profile .Other profile wants to make sdp session with the same device.How can we send query request over the l2cap chanel?
If so, wat will happen after if sdp sends a disconnect request after query?
this simply works. The kernel is able to handle multiple L2CAP and RFCOMM connections without any problems.
Regards
Marcel
Quoted 9 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 9 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
| Peter Wippich Voice: +49 30 46776411 | | G&W Instruments GmbH fax: +49 30 46776419 | | Gustav-Meyer-Allee 25, Geb. 12 Email: [email protected] | | D-13355 Berlin / Germany |
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
[Bluez-devel] headset emulator apps
Hi guys,
sorry for off-topic, but anybody know any headset emulator for linux?
My idea is send mp3 from my phone via bluetooth connection to my linux box, and may redirect sound for real sound sistem.
Thanks in advance,
./nelson -murilo
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Re: [Bluez-devel] headset emulator apps
Nelson,
You are not likely to find a phone that can send quality audio. You'd need it to support A2DP and most devices still don't.
Plus, to decode it, you'd need to write the AVDTP signaling to operate the A2DP "sink" to receive audio. The only good news is you would be able to use the sbc decoder we have at bluetooth-alsa.sf.net to uncompress the audio.
Brad
Quoted 10 lines · Nelson Murilo
Hi guys,
sorry for off-topic, but anybody know any headset emulator for
linux? My idea is send mp3 from my phone via bluetooth connection to my linux box, and may redirect sound for real sound sistem.Thanks in advance,
./nelson -murilo
Quoted 8 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Re: [Bluez-devel] headset emulator apps
Great!
Now I have one point of start.
Thanks a lot.
./nelson -murilo
Quoted 35 lines · Brad Midgley
Nelson,
You are not likely to find a phone that can send quality audio. You'd need it to support A2DP and most devices still don't.
Plus, to decode it, you'd need to write the AVDTP signaling to operate the A2DP "sink" to receive audio. The only good news is you would be able to use the sbc decoder we have at bluetooth-alsa.sf.net to uncompress the audio.
Brad
Quoted 12 lines · Nelson Murilo
Hi guys,
sorry for off-topic, but anybody know any headset emulator for linux?
My idea is send mp3 from my phone via bluetooth connection to my linux box, and may redirect sound for real sound sistem.Thanks in advance,
./nelson -murilo
Quoted 8 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 8 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Marcel Holtmann
maintainerHi Amit,
Quoted 4 lines
can u explain how it is possible?
Because only one l2cap connection is possible over a ACL connection (between 2 devices).
who said so? There can only be one ACL connection between two devices, but there is no limit for L2CAP connections. You can even have multiple connections on the same PSM.
Quoted 10 lines
According to SDP specification, SDP seesion first issue a SDP connect, send SDP query, wait for response and then send SDP disconnect.
if we start a SDP session, What will happen with the l2cap
connection, over which 1( or more ) rfcomm session is running?Should l2cap implementation provide a support for this or SDP should check for that?
if so how to implement this at the l2cap level?
Read the specification and look at the source code. As I said, this simply works.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel