- Delete obsolete header file
PATCH 1/1 - Delete obsolete header file
Delete obsolete header file.
Signed-off-by Jack Steiner <[email protected]>
Index: linux/arch/ia64/sn/include/shub.h
=================================--- linux.orig/arch/ia64/sn/include/shub.h 2005-01-10 12:46:58.327704059 -0600
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUB_H
-#define _ASM_IA64_SN_SHUB_H
-
-
-#define MD_MEM_BANKS 4
-
-
-/*
- * Junk Bus Address Space
- * The junk bus is used to access the PROM, LED's, and UART. It's - * accessed through the local block MMR space. The data path is - * 16 bits wide. This space requires address bits 31-27 to be set, and - * is further divided by address bits 26:15. - * The LED addresses are write-only. To read the LEDs, you need to use - * SH_JUNK_BUS_LED0-3, defined in shub_mmr.h - * - */ -#define SH_REAL_JUNK_BUS_LED0 0x7fed00000UL -#define SH_REAL_JUNK_BUS_LED1 0x7fed10000UL -#define SH_REAL_JUNK_BUS_LED2 0x7fed20000UL -#define SH_REAL_JUNK_BUS_LED3 0x7fed30000UL -#define SH_JUNK_BUS_UART0 0x7fed40000UL -#define SH_JUNK_BUS_UART1 0x7fed40008UL -#define SH_JUNK_BUS_UART2 0x7fed40010UL -#define SH_JUNK_BUS_UART3 0x7fed40018UL -#define SH_JUNK_BUS_UART4 0x7fed40020UL -#define SH_JUNK_BUS_UART5 0x7fed40028UL -#define SH_JUNK_BUS_UART6 0x7fed40030UL -#define SH_JUNK_BUS_UART7 0x7fed40038UL
-
-#endif /* _ASM_IA64_SN_SHUB_H */
Signature · 4 lines
Thanks Jack Steiner ([email protected]) 651-683-5302 Principal Engineer SGI - Silicon Graphics, Inc.