M-Audio Qattro USB
HI!
I read the Install-Howto for snd-usb-audio on www.alsa-project.org. I use Gentoo-Linux (kernel 2.6.9). I have the feeling that the .asoundrc file had no effect on my system.
When I tried to record with a samplerate of 96000 Hz audacity could not open the sounddevice. With 48000 Hz it worked fine in audacity.
With arecord I get the following error message. It doesn't make a difference if I use other sample rates or sample formates.
arecord gives the following output:
bash-2.05b$ arecord -D quattro -f S24_3LE -r 96000 -c 2 -d 10 test.raw Recording WAVE 'test.raw' : Signed 24 bit Little Endian in 3bytes, Rate 96000 Hz, Stereo
arecord: set_params:854: Sample format non available
Thanks for your help!
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Hi,
It's possible the alsa drivers you are using had a broken implementation.
what is the ouput of:
cat /proc/asound/version
Quoting Michael Hoffer <[email protected]>:
Quoted 22 lines
HI!
I read the Install-Howto for snd-usb-audio on www.alsa-project.org. I use Gentoo-Linux (kernel 2.6.9). I have the feeling that the .asoundrc file had no effect on my system.
When I tried to record with a samplerate of 96000 Hz audacity could not open the sounddevice. With 48000 Hz it worked fine in audacity.
With arecord I get the following error message. It doesn't make a difference if I use other sample rates or sample formates.
arecord gives the following output:bash-2.05b$ arecord -D quattro -f
S24_3LE-r 96000 -c 2 -d 10 test.raw Recording WAVE 'test.raw' : Signed 24 bit Little Endian in 3bytes, Rate 96000 Hz, Stereo
arecord: set_params:854: Sample format non availableThanks for your help!
Quoted 9 lines
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com Http://www.djcj.org/ - The Linux Audio Users guide Http://www.djcj.org/gigs - Gigs Guide Korea
========================================
Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Quoted 6 lines · Patrick Shirkey
Quoting Michael Hoffer <[email protected]>:
Quoted 4 lines
bash-2.05b$ arecord -D quattro -f
S24_3LE-r 96000 -c 2 -d 10 test.raw Recording WAVE 'test.raw' : Signed 24 bit Little Endian in 3bytes, Rate 96000 Hz, Stereo
arecord: set_params:854: Sample format non available
What sample formats appear in /proc/asound/cardX/stream0, 1?
Quoted 1 line
It's possible the alsa drivers you are using had a broken implementation.
I just committed a patch against 1.0.8 which should improve the behaviour in some cases (I don't know if it is related to this problem).
Clemens
Signature · 153 lines
Index: alsa-kernel/usb/usbaudio.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbaudio.h,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36
--- alsa-kernel/usb/usbaudio.h 30 Sep 2004 10:11:25 -0000 1.35
+++ alsa-kernel/usb/usbaudio.h 17 Jan 2005 17:41:38 -0000 1.36
@@ -157,6 +157,7 @@
#define QUIRK_MIDI_STANDARD_INTERFACE 6
#define QUIRK_AUDIO_EDIROL_UA700_UA25 7
#define QUIRK_AUDIO_EDIROL_UA1000 8
+#define QUIRK_IGNORE_INTERFACE 9
typedef struct snd_usb_audio_quirk snd_usb_audio_quirk_t;
typedef struct snd_usb_midi_endpoint_info snd_usb_midi_endpoint_info_t;
@@ -190,6 +191,8 @@
/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_IGNORE_INTERFACE, data is null */
+
/*
*/
Index: alsa-kernel/usb/usbaudio.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbaudio.c,v
retrieving revision 1.113
retrieving revision 1.114
diff -u -r1.113 -r1.114
--- alsa-kernel/usb/usbaudio.c 16 Dec 2004 16:12:51 -0000 1.113
+++ alsa-kernel/usb/usbaudio.c 17 Jan 2005 17:41:34 -0000 1.114
@@ -2977,6 +2977,8 @@
return create_ua700_ua25_quirk(chip, iface);
case QUIRK_AUDIO_EDIROL_UA1000:
return create_ua1000_quirk(chip, iface);
+ case QUIRK_IGNORE_INTERFACE:
+ return 0;
default:
snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
return -ENXIO;
Index: alsa-kernel/usb/usbquirks.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbquirks.h,v
retrieving revision 1.38
retrieving revision 1.39
diff -u -r1.38 -r1.39
--- alsa-kernel/usb/usbquirks.h 30 Sep 2004 10:11:25 -0000 1.38
+++ alsa-kernel/usb/usbquirks.h 17 Jan 2005 17:41:38 -0000 1.39
@@ -876,6 +876,22 @@
* but captured samples are big-endian (see usbaudio.c).
*/
{
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
.ifnum = 4,
.type = QUIRK_AUDIO_STANDARD_INTERFACE
},
@@ -884,6 +900,10 @@
.type = QUIRK_AUDIO_STANDARD_INTERFACE
},
{
+ .ifnum = 6,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
.ifnum = 7,
.type = QUIRK_AUDIO_STANDARD_INTERFACE
},
@@ -936,11 +956,56 @@
.driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
.vendor_name = "M-Audio",
.product_name = "OmniStudio",
- .ifnum = 9,
- .type = QUIRK_MIDI_MIDIMAN,
- .data = & (const snd_usb_midi_endpoint_info_t) {
- .out_cables = 0x0001,
- .in_cables = 0x0001
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = & (const snd_usb_audio_quirk_t[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 5,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 6,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 7,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 8,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 9,
+ .type = QUIRK_MIDI_MIDIMAN,
+ .data = & (const snd_usb_midi_endpoint_info_t) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
}
}
},
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirtThat's interesting.
I have been unable to get inputs to work with jackd using a recent cvs. I'll update now.
Regards.
Quoting Clemens Ladisch <[email protected]>:
Quoted 160 lines
Quoted 4 lines · Patrick Shirkey
Quoting Michael Hoffer <[email protected]>:
Quoted 2 lines
bash-2.05b$ arecord -D quattro -f
S24_3LE-r 96000 -c 2 -d 10 test.raw Recording WAVE 'test.raw' : Signed 24 bit Little Endian in 3bytes, Rate96000
Quoted 2 lines
Quoted 2 lines
Hz, Stereo
arecord: set_params:854: Sample format non availableWhat sample formats appear in
/proc/asound/cardX/stream0, 1?Quoted 1 line
It's possible the alsa drivers you are using had a broken implementation.
I just committed a patch against 1.0.8 which should improve the behaviour in some cases (I don't know if it is related to this problem).
Clemens
--
Index:alsa-kernel/usb/usbaudio.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbaudio.h,v retrieving revision 1.35
retrieving revision 1.36
diff -u -r1.35 -r1.36usb/usbaudio.h +3
-0@@ -157,6 +157,7 @@#define QUIRK_MIDI_STANDARD_INTERFACE 6#define QUIRK_AUDIO_EDIROL_UA700_UA25 7#define QUIRK_AUDIO_EDIROL_UA1000 8 +#define QUIRK_IGNORE_INTERFACE 9typedef struct snd_usb_audio_quirk snd_usb_audio_quirk_t ;typedef struct snd_usb_midi_endpoint_info snd_usb_midi_endpoint_info_t ;@@ -190,6 +191,8 @@/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */ +/* for QUIRK_IGNORE_INTERFACE, data is null */ +/* */ Index:
alsa-kernel/usb/usbaudio.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbaudio.c,v retrieving revision 1.113
retrieving revision 1.114
diff -u -r1.113 -r1.114usb/usbaudio.c +2
-0@@ -2977,6 +2977,8 @@return create_ua700_ua25_quirk (chip, iface);case QUIRK_AUDIO_EDIROL_UA1000 :return create_ua1000_quirk (chip, iface); +case QUIRK_IGNORE_INTERFACE : +return 0 ;default :snd_printd (KERN_ERR "invalid quirk type %d\n" , quirk->type);return -ENXIO ;Index:
alsa-kernel/usb/usbquirks.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/usb/usbquirks.h,v retrieving revision 1.38
retrieving revision 1.39
diff -u -r1.38 -r1.39usb/usbquirks.h +63
-5@@ -876,6 +876,22 @@* but captured samples are big-endian (see usbaudio.c). */ { + .ifnum = 0, + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 1, + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 2, + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum = 3, + .type =QUIRK_IGNORE_INTERFACE + }, + { .ifnum = 4, .type =QUIRK_AUDIO_STANDARD_INTERFACE },@@ -884,6 +900,10 @@ .type = QUIRK_AUDIO_STANDARD_INTERFACE }, { + .ifnum = 6, + .type =QUIRK_IGNORE_INTERFACE + }, + { .ifnum = 7, .type =QUIRK_AUDIO_STANDARD_INTERFACE },@@ -936,11 +956,56 @@ .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) { .vendor_name ="M-Audio" , .product_name ="OmniStudio" , - .ifnum =9 , - .type =QUIRK_MIDI_MIDIMAN , - .data = & (const snd_usb_midi_endpoint_info_t ) { - .out_cables =0x0001 , - .in_cables =0x0001 + .ifnum =QUIRK_ANY_INTERFACE , + .type =QUIRK_COMPOSITE , + .data = & (const snd_usb_audio_quirk_t []) { + { + .ifnum =0 , + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum =1 , + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum =2 , + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum =3 , + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum =4 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =5 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =6 , + .type =QUIRK_IGNORE_INTERFACE + }, + { + .ifnum =7 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =8 , + .type =QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum =9 , + .type =QUIRK_MIDI_MIDIMAN , + .data = & (const snd_usb_midi_endpoint_info_t ) {
usb/usbquirks.h line 1011
Quoted 10 lines
usb/usbquirks.h +7
-0+ .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } } } },
--
Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com Http://www.djcj.org/ - The Linux Audio Users guide Http://www.djcj.org/gigs - Gigs Guide Korea
========================================
Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt