Skip to contentSkip to conversation

Alps touchpad probing failure

PATCH In review Daniel Caujolle-Bert 3 participants 4 messages Jan 19, 2005 – Jan 20, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Alps touchpad probing failure

Hi,

With 2.6.11-rc1 bk6 and bk7 (didn't tried with < bk6), my alps touchpad is no
more correctly probed, it's recognised as a standard PS/2 mouse.
So, with this trivial two line patch, everything is working again.

Cheers.

Signature · 4 lines
73's de Daniel "Der Schreckliche", F1RMB.

             -=- Daniel Caujolle-Bert -=- [email protected] -=-
                        -=- http://naboo.homelinux.org -=-
drivers/input/mouse/alps.c +6 -0
@@ -194,6 +194,12 @@
 	int i;
 
 	/*
+	 * Let's clean the stuff.
+	 */
+	if(psmouse_reset(psmouse) < 0)
+	  printk(KERN_ERR "alps reset failed\n");
+
+	/*
 	 * First try "E6 report".
 	 * ALPS should return 0x00,0x00,0x0a or 0x00,0x00,0x64
 	 */
#1 lore raw
Quoted 7 lines · Daniel Caujolle-Bert

Hi,

With 2.6.11-rc1 bk6 and bk7 (didn't tried with < bk6), my alps touchpad is no
more correctly probed, it's recognised as a standard PS/2 mouse.
So, with this trivial two line patch, everything is working again.

Cheers.

Hi,

I think Peter Osterlund has send similar patch recently - the breakage appears to be caused by Kensington mouse detection. It looks like these two don't like each other.

Signature · 1 line
Dmitry
#2 lore raw

Hi Dmitry,

Le Jeudi 20 Janvier 2005 04:45, Dmitry Torokhov a écrit :

Quoted 7 lines · Daniel Caujolle-Bert
Quoted 6 lines

Hi,

With 2.6.11-rc1 bk6 and bk7 (didn't tried with < bk6), my alps touchpad
is no more correctly probed, it's recognised as a standard PS/2 mouse. So, with this trivial two line patch, everything is working again.

Quoted 7 lines
Quoted 1 line

Cheers.

Hi,

I think Peter Osterlund has send similar patch recently - the breakage appears to be caused by Kensington mouse detection. It looks like these two don't like each other.

Oh, i see. Okay, maybe that explain why the ps2 command _CMD_GETINFO returned
the wrong 0x0 0x0 0x16 values.

Cheers.

Signature · 4 lines
73's de Daniel "Der Schreckliche", F1RMB.

             -=- Daniel Caujolle-Bert -=- [email protected] -=-
                        -=- http://naboo.homelinux.org -=-
#3 lore raw
In reply to Daniel Caujolle-Bert
Quoted 7 lines · Daniel Caujolle-Bert

Hi,

With 2.6.11-rc1 bk6 and bk7 (didn't tried with < bk6), my alps touchpad is no
more correctly probed, it's recognised as a standard PS/2 mouse.
So, with this trivial two line patch, everything is working again.

Cheers.

I have had the same problems...
Now solved ...

Thanks for the patch,

Juergen.

Quoted 21 lines
Signature · 4 lines
73's de Daniel "Der Schreckliche", F1RMB.

             -=- Daniel Caujolle-Bert -=- [email protected] -=-
                        -=- http://naboo.homelinux.org -=-
drivers/input/mouse/alps.c +6 -0
@@ -194,6 +194,12 @@
 	int i;
 
 	/*
+	 * Let's clean the stuff.
+	 */
+	if(psmouse_reset(psmouse) < 0)
+	  printk(KERN_ERR "alps reset failed\n");
+
+	/*
 	 * First try "E6 report".
 	 * ALPS should return 0x00,0x00,0x0a or 0x00,0x00,0x64
 	 */