2.6.11-rc2-mm2
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 21 lines · Andrew Morton
help!
Begin forwarded message:
Date: Sat, 29 Jan 2005 23:56:23 +0000
From: Sean Neakums <[email protected]>
To: Andrew Morton <[email protected]>
Cc: [email protected]
Subject: Re: 2.6.11-rc2-mm2Quoted 3 lines · Sean Neakums
On a PowerBook (PowerBook5.4), when
snd_powermacis modprobed during the boot, I get the following. After similar messages for a few more modules, the machine seems wedged.Brice Goglin's patch fixes this.
However, when I modprobe radeonfb I get:
Quoted 7 lines
Jan 29 23:38:16 briny kernel: PCI: Unable to reserve mem region #1:8000000@b8000000 for device 0000:00:10.0 Jan 29 23:38:16 briny kernel: radeonfb: probe of 0000:00:10.0 failed with error -16Not sure if this is expected or not on this platform.
With radeonfb built-in (my current working configuration with 2.6.9) the screen clears and the machine seems to hang early in the boot.
So, I did more tests. As I wrote previously, it's normal that radeonfb as a module doesn't work when offb is in the kernel, we don't quite have an infrastructure to deal with driver "replacement" yet.
It seems -mm2 definitely has some problems regarding loading of modules, it pretty much fails loading all of them for me with some kobject_register errors, I haven't really found out what was up, but then, I didn't have much time neither.
radeonfb built-in operations seem to be ok on my PowerBook3,5 (ATI M9 based), I'll try on a PowerBook5,4 (same as yours) tomorrow hopefully.
Does the machine hang with the screen completely cleared ? Do you see the penguin logo ? Did you try just using pmac_defconfig ?
Ben.
Quoted 2 lines · Benjamin Herrenschmidt
It seems -mm2 definitely has some problems regarding loading of modules,
include/linux/stop_machine.h renamed from include/linux/stop_machine.h~fix-kallsyms-insmod-rmmod-race-fix-fix-fix +1 -1
@@ -57,7 +57,7 @@ static inline int stop_machine_run(int (static inline int stop_machine_run (int (*fn)(void *),void *data,unsigned int cpu) { -return 0 ; +return fn (data); }#endif /* CONFIG_STOP_MACHINE */
_
Quoted 25 lines · Benjamin Herrenschmidt
Quoted 24 lines · Andrew Morton
help!
Begin forwarded message:
Date: Sat, 29 Jan 2005 23:56:23 +0000
From: Sean Neakums <[email protected]>
To: Andrew Morton <[email protected]>
Cc: [email protected]
Subject: Re: 2.6.11-rc2-mm2Quoted 3 lines · Sean Neakums
On a PowerBook (PowerBook5.4), when
snd_powermacis modprobed during the boot, I get the following. After similar messages for a few more modules, the machine seems wedged.Brice Goglin's patch fixes this.
However, when I modprobe radeonfb I get:
Jan 29 23:38:16 briny kernel: PCI: Unable to reserve mem region #1:8000000@b8000000 for device 0000:00:10.0 Jan 29 23:38:16 briny kernel: radeonfb: probe of 0000:00:10.0 failed with error -16
Quoted 8 lines
Quoted 4 lines
Not sure if this is expected or not on this platform.
With radeonfb built-in (my current working configuration with 2.6.9) the screen clears and the machine seems to hang early in the boot.
So, I did more tests. As I wrote previously, it's normal that radeonfb as a module doesn't work when offb is in the kernel, we don't quite have an infrastructure to deal with driver "replacement" yet.
Not to worry. I only ended up with modular radeonfb when I was trying to narrow down the cause of the boot hang.
[...]
Quoted 5 lines
radeonfb built-in operations seem to be ok on my PowerBook3,5 (ATI M9 based), I'll try on a PowerBook5,4 (same as yours) tomorrow hopefully.
Does the machine hang with the screen completely cleared ? Do you see the penguin logo ? Did you try just using
pmac_defconfig?
I seem some openpic messages and then the screen is cleared completely. Alas, I have the logo disabled in my configuration. I'll give pmac_defconfig a go this evening.
I forgot to mention, after radeonfb failed to load as above, I fired up X. The display was unreadably corrupted, although the hardware cursor was fine and I could launch programs. Killing the X server did not return me to the console. I neglected to check if the machine was still accessible via the network.
My current configuration (appended as oldconfig'd for 2.6.11-rc2-mm2) is the Debian one (2.6.8, flavour powerpc) with most of the =m changed to =y (for stuff I use) or else removed.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc2-mm2
# Sat Jan 29 23:41:14 2005
#CONFIG_MMU=yCONFIG_GENERIC_HARDIRQS=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_HAVE_DEC_LOCK=yCONFIG_PPC=yCONFIG_PPC32=yCONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_CLEAN_COMPILE=yCONFIG_BROKEN_ON_SMP=y
#
# General setup
#CONFIG_LOCALVERSION=""CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_SYSCTL=y
# CONFIG_AUDIT is not setCONFIG_LOG_BUF_SHIFT=18CONFIG_HOTPLUG=yCONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_FUTEX=yCONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_LTT is not setCONFIG_SHMEM=yCONFIG_CC_ALIGN_FUNCTIONS=0CONFIG_CC_ALIGN_LABELS=0CONFIG_CC_ALIGN_LOOPS=0CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_OBSOLETE_MODPARM=yCONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_KMOD=y
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E500 is not setCONFIG_ALTIVEC=yCONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_KEXEC is not set CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_PMAC=y CONFIG_CPU_FREQ_TABLE=y CONFIG_PPC601_SYNC_FIX=yCONFIG_PM=yCONFIG_PPC_STD_MMU=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Platform options
#CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_ADIR is not set
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not setCONFIG_PPC_CHRP=yCONFIG_PPC_PMAC=yCONFIG_PPC_PREP=yCONFIG_PPC_OF=yCONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not setCONFIG_HIGHMEM=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=yCONFIG_PROC_DEVICETREE=yCONFIG_PREP_RESIDUAL=yCONFIG_PROC_PREPRESIDUAL=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
#
# Bus options
#
# CONFIG_ISA is not setCONFIG_GENERIC_ISA_DMA=yCONFIG_PCI=yCONFIG_PCI_DOMAINS=yCONFIG_PCI_LEGACY_PROC=yCONFIG_PCI_NAMES=y
#
# PCCARD (PCMCIA/CardBus) support
#CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not setCONFIG_PCCARD_NONSTATIC=m
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used #CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker #CONFIG_CONNECTOR=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not setCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_INITRAMFS_SOURCE=""CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not setCONFIG_BLK_DEV_IDE_PMAC=yCONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=yCONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_SCSI=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not setCONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#CONFIG_ADB=yCONFIG_ADB_CUDA=yCONFIG_ADB_PMU=yCONFIG_PMAC_PBOOK=yCONFIG_PMAC_APM_EMU=yCONFIG_PMAC_BACKLIGHT=yCONFIG_ADB_MACIO=yCONFIG_INPUT_ADBHID=yCONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_WINDTUNNEL is not setCONFIG_THERM_ADT746X=y
# CONFIG_ANSLCD is not set
#
# Networking support
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not setCONFIG_UNIX=yCONFIG_NET_KEY=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_FWMARK=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not setCONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not setCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=yCONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not setCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_TUNNEL=yCONFIG_IP_TCPDIAG=yCONFIG_IP_TCPDIAG_IPV6=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not setCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=yCONFIG_INET6_AH=yCONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=yCONFIG_INET6_TUNNEL=yCONFIG_IPV6_TUNNEL=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=yCONFIG_IP_NF_CT_ACCT=yCONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_LIMIT=yCONFIG_IP_NF_MATCH_IPRANGE=yCONFIG_IP_NF_MATCH_MAC=yCONFIG_IP_NF_MATCH_PKTTYPE=yCONFIG_IP_NF_MATCH_MARK=yCONFIG_IP_NF_MATCH_MULTIPORT=yCONFIG_IP_NF_MATCH_TOS=yCONFIG_IP_NF_MATCH_RECENT=yCONFIG_IP_NF_MATCH_ECN=yCONFIG_IP_NF_MATCH_DSCP=yCONFIG_IP_NF_MATCH_AH_ESP=yCONFIG_IP_NF_MATCH_LENGTH=yCONFIG_IP_NF_MATCH_TTL=yCONFIG_IP_NF_MATCH_TCPMSS=yCONFIG_IP_NF_MATCH_HELPER=yCONFIG_IP_NF_MATCH_STATE=yCONFIG_IP_NF_MATCH_CONNTRACK=yCONFIG_IP_NF_MATCH_OWNER=yCONFIG_IP_NF_MATCH_ADDRTYPE=yCONFIG_IP_NF_MATCH_REALM=y
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not setCONFIG_IP_NF_MATCH_CONNMARK=yCONFIG_IP_NF_MATCH_HASHLIMIT=yCONFIG_IP_NF_FILTER=yCONFIG_IP_NF_TARGET_REJECT=yCONFIG_IP_NF_TARGET_LOG=yCONFIG_IP_NF_TARGET_ULOG=yCONFIG_IP_NF_TARGET_TCPMSS=yCONFIG_IP_NF_NAT=yCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=yCONFIG_IP_NF_TARGET_REDIRECT=yCONFIG_IP_NF_TARGET_NETMAP=yCONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not setCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_TOS=yCONFIG_IP_NF_TARGET_ECN=yCONFIG_IP_NF_TARGET_DSCP=yCONFIG_IP_NF_TARGET_MARK=yCONFIG_IP_NF_TARGET_CLASSIFY=yCONFIG_IP_NF_TARGET_CONNMARK=yCONFIG_IP_NF_TARGET_CLUSTERIP=yCONFIG_IP_NF_RAW=yCONFIG_IP_NF_TARGET_NOTRACK=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not setCONFIG_XFRM=yCONFIG_XFRM_USER=y
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not setCONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not setCONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_IRDA is not setCONFIG_BT=yCONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not setCONFIG_BT_RFCOMM=yCONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not setCONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=y
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not setCONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not setCONFIG_SUNGEM=y
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#CONFIG_HERMES=m
# CONFIG_APPLE_AIRPORT is not set
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_PMACZILOG=yCONFIG_SERIAL_PMACZILOG_CONSOLE=y
# CONFIG_SERIAL_TXX9 is not setCONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_NVRAM=yCONFIG_GEN_RTC=yCONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#CONFIG_AGP=yCONFIG_AGP_UNINORTH=yCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_HYDRA is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not setCONFIG_I2C_KEYWEST=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=y
# CONFIG_DVB_CORE is not set
#
# Graphics support
#CONFIG_FB=yCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_OF=yCONFIG_FB_CONTROL=yCONFIG_FB_PLATINUM=yCONFIG_FB_VALKYRIE=yCONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not setCONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not setCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_NEEPALT10x20 is not set
# CONFIG_FONT_NEEPALT12x24 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#CONFIG_SOUND=y
# CONFIG_DMASOUND_PMAC is not set
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_TIMER=mCONFIG_SND_PCM=m
# CONFIG_SND_SEQUENCER is not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=yCONFIG_SND_PCM_OSS=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# ALSA PowerMac devices
#CONFIG_SND_POWERMAC=m
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not setCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_AUDIO=y
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem #
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information #CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not setCONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not setCONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not setCONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not setCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not setCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
#
# Library routines
#
# CONFIG_CRC_CCITT is not setCONFIG_CRC32=yCONFIG_LIBCRC32C=y
# CONFIG_QSORT is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=y
#
# Profiling support
#CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_INFO is not setCONFIG_DEBUG_FS=y
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not setCONFIG_BOOTX_TEXT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_WP512=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not setCONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
Quoted 14 lines · Sean Neakums
Not to worry. I only ended up with modular radeonfb when I was trying to narrow down the cause of the boot hang.
[...]
Quoted 5 lines
radeonfb built-in operations seem to be ok on my PowerBook3,5 (ATI M9 based), I'll try on a PowerBook5,4 (same as yours) tomorrow hopefully.
Does the machine hang with the screen completely cleared ? Do you see the penguin logo ? Did you try just using
pmac_defconfig?I seem some openpic messages and then the screen is cleared completely. Alas, I have the logo disabled in my configuration. I'll give
pmac_defconfiga go this evening.
Quoted 5 lines
I forgot to mention, after radeonfb failed to load as above, I fired up X. The display was unreadably corrupted, although the hardware cursor was fine and I could launch programs. Killing the X server did not return me to the console. I neglected to check if the machine was still accessible via the network.
X tend to be upset on macs if radeonfb hasn't pre-initialized the chip. I think I fixed all of these problems in Xorg CVS tho.
Ben.
Quoted 11 lines · Benjamin Herrenschmidt
On Sat, 2005-01-29 at 16:31 -0800, Andrew Morton wrote:
It seems -mm2 definitely has some problems regarding loading of modules, it pretty much fails loading all of them for me with somekobject_registererrors, I haven't really found out what was up, but then, I didn't have much time neither.radeonfb built-in operations seem to be ok on my PowerBook3,5 (ATI M9 based), I'll try on a PowerBook5,4 (same as yours) tomorrow hopefully.
Does the machine hang with the screen completely cleared ? Do you see the penguin logo ? Did you try just using
pmac_defconfig?
I'm getting a blank screen with radeonfb on two boxes here as
well. One is a beige g3, the other is i386; both have PCI Radeon 7000s with radeonfb non-modular.
On the PC I could see the earliest kernel messages in VGA text
mode before radeonfb took over and the screen went blank -- no penguin, and the logo is enabled. Booting with radeonfb:off seemed to work except for the module problem in -rc2-mm2:
On the ppc box I tried both -rc2-mm1 and -rc2-mm2. Both hung and
then rebooted after 3 minutes, so it seems to be panicing somewhere. I backed the massive-radeonfb patch out of -mm2 and radeonfb worked, so I got as far as the module thing again.
So yeah, it's possible that there's something in -mm1 that panics
my ppc, and radeonfb is just making a blank screen, but it seems more likely that radeonfb is panicing. I tried to get netconsole working on both machines, but it didn't work out for unrelated reasons.
Hopefully I'll have more time to poke at this tomorrow; maybe this
is helpful somehow.
Signature · 2 lines
Joseph Fannin [email protected]
Quoted 14 lines · Joseph Fannin
I'm getting a blank screen with radeonfb on two boxes here as
well. One is a beige g3, the other is i386; both have PCI Radeon 7000s with radeonfb non-modular.On the PC I could see the earliest kernel messages in VGA text
mode before radeonfb took over and the screen went blank -- no penguin, and the logo is enabled. Booting with radeonfb:off seemed to work except for the module problem in -rc2-mm2:On the ppc box I tried both -rc2-mm1 and -rc2-mm2. Both hung and
then rebooted after 3 minutes, so it seems to be panicing somewhere. I backed the massive-radeonfb patch out of -mm2 and radeonfb worked, so I got as far as the module thing again.
Quoted 7 lines
So yeah, it's possible that there's something in -mm1 that panics
my ppc, and radeonfb is just making a blank screen, but it seems more likely that radeonfb is panicing. I tried to get netconsole working on both machines, but it didn't work out for unrelated reasons.Hopefully I'll have more time to poke at this tomorrow; maybe this
is helpful somehow.
Hrm... indeed, there seem to be a problem, though I can't tell for sure what's up now, it just works on all the configs I had a chance to test on. Can you try to boot your G3 with serial console so you can see the panic message if any ?
Ben.
Quoted 17 lines · Benjamin Herrenschmidt
Quoted 9 lines · Joseph Fannin
I'm getting a blank screen with radeonfb on two boxes here as
well. One is a beige g3, the other is i386; both have PCI Radeon 7000s with radeonfb non-modular.On the PC I could see the earliest kernel messages in VGA text
mode before radeonfb took over and the screen went blank -- no penguin, and the logo is enabled. Booting with radeonfb:off seemed to work except for the module problem in -rc2-mm2:Quoted 4 lines
On the ppc box I tried both -rc2-mm1 and -rc2-mm2. Both hung and
then rebooted after 3 minutes, so it seems to be panicing somewhere. I backed the massive-radeonfb patch out of -mm2 and radeonfb worked, so I got as far as the module thing again.
Quoted 4 lines
Hrm... indeed, there seem to be a problem, though I can't tell for sure what's up now, it just works on all the configs I had a chance to test on. Can you try to boot your G3 with serial console so you can see the panic message if any ?
Okay, I managed to get this Oops message on ppc, when modprobing a
modular radeonfb. I got a similar backtrace on i386 too (lost it though).
radeonfb_pci_register BEGIN
PCI: Enabling device 0000:00:0e.0 (0086 -> 0087)aper_base: 88000000 MC_FB_LOC to: 8bff8800, MC_AGP_LOC to: ffff9000 radeonfb (0000:00:0e.0): Found 32768k of DDR 64 bits wide videoram radeonfb (0000:00:0e.0): mapped 16384k videoram
radeonfb: Found Open Firmware ROM Image
radeonfb: Retreived PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... found CRT display
radeonfb: I2C (port 3) ... found CRT display
radeonfb: I2C (port 4) ... not foundradeon_probe_OF_head
head: ATY,RV100ad_A (letter: A, head_no: 0)
analyzing OF properties...
display-type: CRTradeon_probe_OF_head
head: ATY,RV100ad_A (letter: A, head_no: 1)
radeonfb: I2C (port 3) ... found CRT display
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type CRT found
radeonfb: EDID probed
Oops: kernel access of bad area, sig: 11 [#1]
PREEMPT
NIP: C00F3DD8 LR: DD2AEF48 SP: D8C8BB50 REGS: d8c8baa0 TRAP: 0300 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000008, DSISR: 40000000
TASK = c040f1e0[4326] 'modprobe' THREAD: d8c8a000
Last syscall: 128
GPR00: DD2B1950 D8C8BB50 C040F1E0 D8C8BB90 00000000 00000000 D8C8BC2C DD480008
GPR08: FFFFFFFF 00000000 DD2B0000 C00F3DD8 24004482 1001E294 00000000 100013C4
GPR16: 00000000 00000000 00000000 00000000 100013C4 00000000 C0320000 DD2B0000
GPR24: C0320000 D8C8BBD4 DD2B6470 DD2B647C D8C8BB90 DD2B6438 C08C1000 D8DBA000 NIP [c00f3dd8] fb_videomode_to_var+0x0/0x5c
LR [dd2aef48] display_to_var+0x2c/0xb4 [fbcon]
Call trace: [dd2b1950] fbcon_switch+0x17c/0x4d8 [fbcon] [c0124f20] redraw_screen+0x13c/0x1e8 [c01288c0] take_over_console+0x400/0x518 [dd2ae3e4] fbcon_takeover+0x98/0xfc [fbcon] [dd2b31cc] fbcon_fb_registered+0x68/0xc4 [fbcon] [dd2b3348] fbcon_event_notify+0x6c/0xd8 [fbcon] [c002bbc0] notifier_call_chain+0x40/0x68 [c00f0ec0] register_framebuffer+0x180/0x198 [dd32e834] radeonfb_pci_register+0x3bc/0x4f0 [radeonfb] [c00e9990] pci_device_probe_static+0x54/0x84 [c00e99f8] __pci_device_probe+0x38/0x6c [c00e9a5c] pci_device_probe+0x30/0x5c [c0137464] driver_probe_device+0x60/0x9c [c01375d4] driver_attach+0x58/0xbc [c0137be4] bus_add_driver+0xb0/0x108
Signature · 2 lines
Joseph Fannin [email protected]
Quoted 18 lines · Joseph Fannin
Quoted 17 lines · Benjamin Herrenschmidt
Quoted 13 lines · Joseph Fannin
I'm getting a blank screen with radeonfb on two boxes here as
well. One is a beige g3, the other is i386; both have PCI Radeon 7000s with radeonfb non-modular.On the PC I could see the earliest kernel messages in VGA text
mode before radeonfb took over and the screen went blank -- no penguin, and the logo is enabled. Booting with radeonfb:off seemed to work except for the module problem in -rc2-mm2:On the ppc box I tried both -rc2-mm1 and -rc2-mm2. Both hung and
then rebooted after 3 minutes, so it seems to be panicing somewhere. I backed the massive-radeonfb patch out of -mm2 and radeonfb worked, so I got as far as the module thing again.
Quoted 7 lines
Quoted 4 lines
Hrm... indeed, there seem to be a problem, though I can't tell for sure what's up now, it just works on all the configs I had a chance to test on. Can you try to boot your G3 with serial console so you can see the panic message if any ?
Okay, I managed to get this Oops message on ppc, when modprobing a
modular radeonfb. I got a similar backtrace on i386 too (lost it though).
Interesting ... I'll have a look. Seems like some generic change is causing it.
Ben.