non-PC parport config change
Subsystems (2)
PATCH 1/1 non-PC parport config change
This patch adds a config option PARPORT_NOT_PC (and removes the PARPORT_OTHER option) that get's selected if any non-PC hardware was chosen.
This way, the mega #if in parport.h is gone now.
Additionally, it removes the unneeded PARPORT_NEED_GENERIC_OPS #define.
Signed-off-by Adrian Bunk <[email protected]>
---
include/linux/parport.h | 12 +++++------- drivers/parport/Kconfig | 20 +++++++++----------- drivers/usb/Kconfig | 1 + 3 files changed, 15 insertions(+), 18 deletions(-)
This patch was already sent on:
- 20 Jan 2005
include/linux/parport.h renamed from include/linux/parport.h.old +5 -7
@@ -105,8 +105,6 @@#include <asm/ptrace.h> #include <asm/semaphore.h> -#define PARPORT_NEED_GENERIC_OPS -/* Define this later. */ struct parport ;struct pardevice ;
@@ -520,9 +518,8 @@extern int parport_device_proc_unregister (struct pardevice *device);/* If PC hardware is the only type supported, we can optimise a bit. */ -#if (defined(CONFIG_PARPORT_PC ) || defined(CONFIG_PARPORT_PC_MODULE )) && !(defined(CONFIG_PARPORT_ARC ) || defined(CONFIG_PARPORT_ARC_MODULE )) && !(defined(CONFIG_PARPORT_AMIGA ) || defined(CONFIG_PARPORT_AMIGA_MODULE )) && !(defined(CONFIG_PARPORT_MFC3 ) || defined(CONFIG_PARPORT_MFC3_MODULE )) && !(defined(CONFIG_PARPORT_ATARI ) || defined(CONFIG_PARPORT_ATARI_MODULE )) && !(defined(CONFIG_USB_USS720 ) || defined(CONFIG_USB_USS720_MODULE )) && !(defined(CONFIG_PARPORT_SUNBPP ) || defined(CONFIG_PARPORT_SUNBPP_MODULE )) && !defined(CONFIG_PARPORT_OTHER ) +#if !defined(CONFIG_PARPORT_NOT_PC ) -#undef PARPORT_NEED_GENERIC_OPS#include <linux/parport_pc.h> #define parport_write_data (p,x) parport_pc_write_data(p,x)#define parport_read_data (p) parport_pc_read_data(p)
@@ -534,9 +531,9 @@#define parport_disable_irq (p) parport_pc_disable_irq(p)#define parport_data_forward (p) parport_pc_data_forward(p)#define parport_data_reverse (p) parport_pc_data_reverse(p) -#endif -#ifdef PARPORT_NEED_GENERIC_OPS +#else /* !CONFIG_PARPORT_NOT_PC */ +/* Generic operations vector through the dispatch table. */ #define parport_write_data (p,x) (p)->ops->write_data(p,x)#define parport_read_data (p) (p)->ops->read_data(p)
@@ -548,7 +545,8 @@#define parport_disable_irq (p) (p)->ops->disable_irq(p)#define parport_data_forward (p) (p)->ops->data_forward(p)#define parport_data_reverse (p) (p)->ops->data_reverse(p) -#endif + +#endif /* !CONFIG_PARPORT_NOT_PC */ #endif /* __KERNEL__ */ #endif /* _PARPORT_H_ */
drivers/parport/Kconfig renamed from drivers/parport/Kconfig.old +9 -11
@@ -88,13 +88,18 @@ Say Y here if you need PCMCIA support for your PC-style parallel ports. If unsure, say N. +config PARPORT_NOT_PC + bool + config PARPORT_ARC tristate "Archimedes hardware" depends on ARM && PARPORT + select PARPORT_NOT_PC config PARPORT_AMIGA tristate "Amiga builtin port" depends on AMIGA && PARPORT + select PARPORT_NOT_PC help Say Y here if you need support for the parallel port hardware on Amiga machines. This code is also available as a module (say M),
@@ -103,6 +108,7 @@ config PARPORT_MFC3 tristate "Multiface III parallel port" depends on ZORRO && PARPORT + select PARPORT_NOT_PC help Say Y here if you need parallel port support for the MFC3 card. This code is also available as a module (say M), called
@@ -111,6 +117,7 @@ config PARPORT_ATARI tristate "Atari hardware" depends on ATARI && PARPORT + select PARPORT_NOT_PC help Say Y here if you need support for the parallel port hardware on Atari machines. This code is also available as a module (say M),
@@ -123,22 +130,13 @@ config PARPORT_SUNBPP tristate "Sparc hardware (EXPERIMENTAL)" - depends on SBUS && EXPERIMENTAL && PARPORT + depends on SBUS && PARPORT && EXPERIMENTAL + select PARPORT_NOT_PC help This driver provides support for the bidirectional parallel port found on many Sun machines. Note that many of the newer Ultras actually have pc style hardware instead. -# If exactly one hardware type is selected then parport will optimise away -# support for loading any others. Defeat this if the user is keen. -config PARPORT_OTHER - bool "Support foreign hardware" - depends on PARPORT - help - Say Y here if you want to be able to load driver modules to support - other non-standard types of parallel ports. This causes a - performance loss, so most people say N. - config PARPORT_1284 bool "IEEE 1284 transfer modes" depends on PARPORT
drivers/usb/Kconfig renamed from drivers/usb/Kconfig.old +1 -0
@@ -62,6 +62,7 @@ config USB_USS720 tristate "USS720 parport driver" depends on USB && PARPORT + select PARPORT_NOT_PC ---help--- This driver is for USB parallel port adapters that use the Lucent Technologies USS-720 chip. These cables are plugged into your USB