Configure MTU via kernel DHCP
Subsystems (2)
PATCH 1/1 Configure MTU via kernel DHCP
The attached patch enhances the kernel's DHCP client support (in net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.
More background: it's currently difficult to netboot on a jumbo frame network because when clients try to mount the root partition, they are still configured with a small MTU and therefore reject packets sent by the jumbo-frame-enabled NFS server. Linux needs to set the client MTU before mounting any NFS shares. Fortunately, the DHCP protocol already supports setting the MTU; this patch just integrates that feature into the kernel.
Incidentally, ipconfig.c doesn't appear to do enough bounds checking on byte 1 of DHCP/BOOTP extension fields (the length field). It looks like a malicious DHCP server could mess with kernel memory that way. I could try to fix the hole, but maybe someone more experienced with this code would like to verify there's a problem first.
Shane
ipconfig.c renamed from ipconfig.c.orig +15 -2
@@ -126,6 +126,7 @@int ic_host_name_set__initdata =0 ;/* Host name set by us? */ +u16 ic_mtu =0 ;/* Interface MTU */ u32 ic_myaddr =INADDR_NONE ;/* My IP address */ u32 ic_netmask =INADDR_NONE ;/* Netmask for local subnet */ u32 ic_gateway =INADDR_NONE ;/* Gateway IP address */
@@ -322,6 +323,13 @@printk (KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n" , err);return -1 ; } +rtnl_shlock (); + err =dev_set_mtu (ic_dev, ic_mtu); +rtnl_shunlock (); +if (err <0 ) { +printk (KERN_ERR "IP-Config: Unable to set interface MTU (%d).\n" , err); +return -1 ; + }return 0 ; }
@@ -609,6 +617,7 @@12 ,/* Host name */ 15 ,/* Domain name */ 17 ,/* Boot path */ +26 ,/* MTU */ 40, /* NIS domain name */ };
@@ -812,6 +821,9 @@if (!root_server_path[0 ])ic_bootp_string (root_server_path, ext+1 , *ext,sizeof (root_server_path));break ; +case 26 :/* Interface MTU */ + ic_mtu = (((u16 ) ext[1 ]) <<8 ) | ext[2 ]; +break ;case 40 :/* NIS Domain name (_not_ DNS) */ ic_bootp_string (system_utsname.domainname, ext+1 , *ext, __NEW_UTS_LEN);break ;
@@ -1362,8 +1374,9 @@* Clue in the operator. */ printk ("IP-Config: Complete:" ); -printk ("\n device=%s" , ic_dev->name); -printk (", addr=%u.%u.%u.%u" ,NIPQUAD (ic_myaddr)); +printk ("\n device=%s" , ic_dev->name); +printk (", mtu=%u" , (unsigned int )ic_mtu); +printk (",\n addr=%u.%u.%u.%u" ,NIPQUAD (ic_myaddr));printk (", mask=%u.%u.%u.%u" ,NIPQUAD (ic_netmask));printk (", gw=%u.%u.%u.%u" ,NIPQUAD (ic_gateway)); printk(",\n host=%s, domain=%s, nis-domain=%s",
Quoted 6 lines · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.
Have you looked at using initramfs and running the DHCP client in user space? You'll get a lot more freedom that way.
Cheers,
Signature · 4 lines
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txtQuoted 7 lines · Herbert Xu
Quoted 1 line · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.Have you looked at using initramfs and running the DHCP client in user space? You'll get a lot more freedom that way.
Hey, that's a good idea. I'll explore it.
Shane
Followup to: <[email protected]> By author: Herbert Xu <[email protected]> In newsgroup: linux.dev.kernel
Quoted 4 lines
Have you looked at using initramfs and running the DHCP client in user space? You'll get a lot more freedom that way.
Note that the klibc distribution already contains a working dhcp client. The only thing missing is just "putting the backwards into backwards compatible", i.e. handling *all* the (sometimes weird) kernel behaviours for full compatibility.
-hpa
Quoted 13 lines · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.More background: it's currently difficult to netboot on a jumbo frame network because when clients try to mount the root partition, they are still configured with a small MTU and therefore reject packets sent by the jumbo-frame-enabled NFS server. Linux needs to set the client MTU before mounting any NFS shares. Fortunately, the DHCP protocol already supports setting the MTU; this patch just integrates that feature into the kernel.
Quoted 5 lines
Incidentally,
ipconfig.cdoesn't appear to do enough bounds checking on byte 1 of DHCP/BOOTP extension fields (the length field). It looks like a malicious DHCP server could mess with kernel memory that way. I could try to fix the hole, but maybe someone more experienced with this code would like to verify there's a problem first.
Long term solution is to use approptiately configured initramfs or initrd image and do above mentioned stuff in userspace.
--
vda
Hi Shane,
Quoted 6 lines · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.
Well, I've been there before, and asked for exact the same back in June 2003, but had much less luck, nobody of kernel fame even responded:
http://marc.theaimsgroup.com/?l=linux-kernel&m=105624464918574&w=4
Only Ken Yap of etherboot fame told me:
Quoted 3 lines
I have a feeling you will not get much sympathy for 2.[56] because there ipconfig in the kernel is deprecated in favour of userspace config from the initrd.
Well that's life.
For what is worth it, I ported my patch to current 2.6, which raised some comments compared to yours:
- Is it really necessary to protect the dev_set_mtu call, since it is just setting up the device?
- I prefer to call dev_set_mtu only, if a change mtu request is sent..
- Are you sure, you got the endianess right?
Here's the "cost": ipconfig.o without my patch on x86:
3 .init.data 0000005a 00000000 00000000 00000220 2**2
CONTENTS, ALLOC, LOAD, RELOC, DATA
4 .rodata.str1.1 000001a2 00000000 00000000 0000027a 2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 .rodata.str1.4 000003ad 00000000 00000000 0000041c 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .init.text 00001a45 00000000 00000000 000007d0 2**4
CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODE
With patch:
3 .init.data 0000005e 00000000 00000000 00000220 2**2
CONTENTS, ALLOC, LOAD, RELOC, DATA
4 .rodata.str1.1 000001ab 00000000 00000000 0000027e 2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 .rodata.str1.4 000003e5 00000000 00000000 0000042c 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .init.text 00001ab5 00000000 00000000 00000820 2**4
CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODE
Difference: 181 Bytes (padding ignored)
The whole module takes about 9K, compared to dhcp in initrd, which takes a few hundred K! Hmm.
Quoted 6 lines
Incidentally,
ipconfig.cdoesn't appear to do enough bounds checking on byte 1 of DHCP/BOOTP extension fields (the length field). It looks like a malicious DHCP server could mess with kernel memory that way. I could try to fix the hole, but maybe someone more experienced with this code would like to verify there's a problem first.
That's an interesting question. Please keep me informed on any new perceptions in this respect.
May the linux gods indulge on this topic one day or remove the ipconfig module completely.
net/ipv4/ipconfig.c renamed from net/ipv4/ipconfig.c.orig +19 -0
@@ -29,6 +29,10 @@* * Multiple Nameservers in /proc/net/pnp * -- Josef Siemes <[email protected]>, Aug 2002 +* +* Support for MTU selection via DHCP +* -- Hans-Peter Jansen <[email protected]>, June 2003 +* redone for 2.6 in February 2005 */ #include <linux/config.h>
@@ -151,6 +155,9 @@/* Protocols supported by available interfaces */ static int ic_proto_have_if__initdata =0 ; +/* MTU of device (if requested) */ +static int ic_dev_mtu__initdata =0 ; +#ifdef IPCONFIG_DYNAMIC static DEFINE_SPINLOCK (ic_recv_lock);static volatile int ic_got_reply__initdata =0 ;/* Proto(s) that replied */
@@ -322,6 +329,12 @@printk (KERN_ERR "IP-Config: Unable to set interface broadcast address (%d).\n" , err);return -1 ; } +if (ic_dev_mtu) { +if ((err =dev_set_mtu (ic_dev, ic_dev_mtu)) <0 ) +printk (KERN_ERR "IP-Config: Unable to set interface mtu to %d (%d).\n" , + ic_dev_mtu, err); +/* Don't error out because set mtu failure, just notice the operator */ + }return 0 ; }
@@ -609,6 +622,7 @@12 ,/* Host name */ 15 ,/* Domain name */ 17 ,/* Boot path */ +26 ,/* MTU */ 40, /* NIS domain name */ };
@@ -812,6 +826,9 @@if (!root_server_path[0 ])ic_bootp_string (root_server_path, ext+1 , *ext,sizeof (root_server_path));break ; +case 26 :/* MTU */ + ic_dev_mtu =ntohs (*(u16 *)(ext+1 )); +break ;case 40 :/* NIS Domain name (_not_ DNS) */ ic_bootp_string (system_utsname.domainname, ext+1 , *ext, __NEW_UTS_LEN);break ;
@@ -1363,6 +1380,8 @@*/ printk ("IP-Config: Complete:" );printk ("\n device=%s" , ic_dev->name); +if (ic_dev_mtu) +printk (", mtu=%d" , ic_dev_mtu);printk (", addr=%u.%u.%u.%u" ,NIPQUAD (ic_myaddr));printk (", mask=%u.%u.%u.%u" ,NIPQUAD (ic_netmask));printk (", gw=%u.%u.%u.%u" ,NIPQUAD (ic_gateway));
Compile tested. Any takers?
Cheers,
Pete
Quoted 7 lines · Hans-Peter Jansen
Quoted 6 lines · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.
What will this code do at the (increasingly common) misconfigured sites
- many places (hotels, airports, etc) return a MTU of 64... to which the DHCP3 client faithfully attempts to set, only to receive:
SIOCSIFMTU: Invalid argument
And is one of the easiest issues I've had during my travels - thankfully I don't do it all that often; trying to tell the helpdesk folk that their DHCP server is handing out bogus DNS servers, MTU, even networks is an exercise in futility.
Signature · 4 lines
Rick Nelson "Absolutely nothing should be concluded from these figures except that no conclusion can be drawn from them." (By Joseph L. Brothers, Linux/PowerPC Project)
Quoted 6 lines · Richard A Nelson
What will this code do at the (increasingly common) misconfigured sites - many places (hotels, airports, etc) return a MTU of 64... to which the DHCP3 client faithfully attempts to set, only to receive:
SIOCSIFMTU: Invalid argument
Well, the ip auto configuration is mainly intended for diskless setups, not something, one will use in an uncontrolled environment. I doubt, it will behave different, as well as usual distribution kernels will never enable this by default..
Pete
Quoted 10 lines · Hans-Peter Jansen
Quoted 6 lines · Shane Hathaway
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server. Without this patch, it's difficult to netboot on a network that uses jumbo frames. The patch is based on 2.6.10, but I'll update it to the latest testing kernel if that would expedite its inclusion in the kernel.
Quoted 2 lines
Well, I've been there before, and asked for exact the same back in June 2003, but had much less luck, nobody of kernel fame even responded:
http://marc.theaimsgroup.com/?l=linux-kernel&m=105624464918574&w=4
I wish I had found your patch before I went to the trouble of writing my own! Yours is just as good as mine.
Quoted 4 lines
For what is worth it, I ported my patch to current 2.6, which raised some comments compared to yours:
- Is it really necessary to protect the
dev_set_mtucall, since it is just setting up the device?
Without rtnl_shlock(), something complains about RTNL not being locked. I don't know much beyond that.
Quoted 2 lines
- I prefer to call
dev_set_mtuonly, if a change mtu request is sent..
Yes, I can see that. Either way is fine by me.
Quoted 1 line
- Are you sure, you got the endianess right?
On the MTU parameter? Yes, it's network byte order, big-endian.
Quoted 22 lines
Here's the "cost": ipconfig.o without my patch on x86:
3 .init.data
0000005a00000000 00000000 00000220 2**2
CONTENTS, ALLOC, LOAD, RELOC, DATA
4 .rodata.str1.1000001a200000000 000000000000027a2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 .rodata.str1.4000003ad00000000 000000000000041c2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .init.text00001a4500000000 00000000000007d02**4
CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODEWith patch:
3 .init.data
0000005e00000000 00000000 00000220 2**2
CONTENTS, ALLOC, LOAD, RELOC, DATA
4 .rodata.str1.1000001ab00000000 000000000000027e2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 .rodata.str1.4000003e500000000 000000000000042c2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .init.text00001ab500000000 00000000 00000820 2**4
CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODE
Quoted 3 lines
Difference: 181 Bytes (padding ignored)
The whole module takes about 9K, compared to dhcp in initrd, which takes a few hundred K! Hmm.
It's probably better to compare your patch with its apparent successor, however. The tiny DHCP client in the klibc package already supports setting the MTU.
Quoted 1 line
May the linux gods indulge on this topic one day or remove the ipconfig module completely.
A friend of mine just had the misfortune of running into the exact same problem, but then he had the fortune of finding your patch. So at least the curse has a temporary remedy. :-) The long-term solution is klibc, I hope. klibc in initramfs could ease a lot of pain.
Shane
Quoted 7 lines · Hans-Peter Jansen
Hi Shane,
Difference: 181 Bytes (padding ignored)
The whole module takes about 9K, compared to dhcp in initrd, which takes a few hundred K! Hmm.
And the kinit from the klibc package (A static executable that does everything the kernel currently does for mounting root including handling what ipconfig handles it in only 35K (uncompressed).
Quoted 5 lines
That's an interesting question. Please keep me informed on any new perceptions in this respect.
May the linux gods indulge on this topic one day or remove the ipconfig module completely.
Well that actually is the goal. A major problem is that there are enough policy issues that the kernel simply cannot get it right, for all users.
Eric