Skip to contentSkip to conversation

udev not reading permissions

DISCUSSION Mark Healey 4 participants 10 messages Feb 4, 2005 – Feb 6, 2005

lore
Share & tools
lore
#0 lore raw

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

#] ls -l /etc/udev/rules.d
total 28

-rw-r--r--  1 root root   60 Jan 31 21:56 05-marks.rules
-rw-r--r--  1 root root  146 Sep 29 06:38 10-wacom.rules
-rw-r--r--  1 root root 4739 Dec 15 07:34 50-udev.rules

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]ls -l /etc/udev/permissions.d
total 16
-rw-r--r-- 1 root root 20 Feb 1 06:32 05-marks.permissions
-rw-r--r-- 1 root root 3508 Dec 15 07:34 50-udev.permissions

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Signature · 13 lines
Mark Healey
[email protected]


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#1 lore raw
Quoted 21 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

#] ls -l /etc/udev/rules.d
total 28

(quoted diff) +0 -3
-rw-r--r--  1 root root   60 Jan 31 21:56 05-marks.rules
-rw-r--r--  1 root root  146 Sep 29 06:38 10-wacom.rules
-rw-r--r--  1 root root 4739 Dec 15 07:34 50-udev.rules

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]ls -l /etc/udev/permissions.d
total 16

(quoted diff) +0 -2
-rw-r--r--  1 root root   20 Feb  1 06:32 05-marks.permissions
-rw-r--r--  1 root root 3508 Dec 15 07:34 50-udev.permissions
Quoted 5 lines

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

What version of udev?

What does 'udevtest' for the device say?

thanks,

greg k-h

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#2 lore raw
In reply to Mark Healey
Quoted 21 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

#] ls -l /etc/udev/rules.d
total 28

(quoted diff) +0 -3
-rw-r--r--  1 root root   60 Jan 31 21:56 05-marks.rules
-rw-r--r--  1 root root  146 Sep 29 06:38 10-wacom.rules
-rw-r--r--  1 root root 4739 Dec 15 07:34 50-udev.rules

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]ls -l /etc/udev/permissions.d
total 16

(quoted diff) +0 -2
-rw-r--r--  1 root root   20 Feb  1 06:32 05-marks.permissions
-rw-r--r--  1 root root 3508 Dec 15 07:34 50-udev.permissions
Quoted 5 lines

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Hmm, does the rule work without ',' between the keys? And please use 4 digit octal numbers for the mode.

Other than that, I can't see what's going wrong here. How about just adding the permissions to the rule. In newer versions of udev the .permissions files are gone and you need to specify it along with the rules anyway.

SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Good luck,
Kay

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#3 lore raw
In reply to Mark Healey
Quoted 22 lines · Kay Sievers
Quoted 7 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

Quoted 8 lines

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Hmm, does the rule work without ',' between the keys? And please use 4 digit octal numbers for the mode.

Quoted 6 lines

Other than that, I can't see what's going wrong here. How about just adding the permissions to the rule. In newer versions of udev the .permissions files are gone and you need to specify it along with the rules anyway.

SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

permissions file now reads:
pilot:root:root:0666

rules file now reads (minus mailer induced wraping):
SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Still get:
crw------- 1 mark root 188, 1 Feb 5 08:45 /dev/pilot

How do I determine the version? I'm just uning yum to keep things up to date.

Signature · 14 lines
Mark Healey
[email protected]



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#4 lore raw
In reply to Mark Healey
Quoted 30 lines · Mark Healey
Quoted 22 lines · Kay Sievers
Quoted 7 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

Quoted 8 lines

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Hmm, does the rule work without ',' between the keys? And please use 4 digit octal numbers for the mode.

Quoted 6 lines

Other than that, I can't see what's going wrong here. How about just adding the permissions to the rule. In newer versions of udev the .permissions files are gone and you need to specify it along with the rules anyway.

SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Quoted 8 lines

permissions file now reads:
pilot:root:root:0666

rules file now reads (minus mailer induced wraping):
SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Still get:
crw------- 1 mark root 188, 1 Feb 5 08:45 /dev/pilot

Strange. What does:
udevinfo -q all -n /dev/pilot

print?

Quoted 2 lines

How do I determine the version? I'm just uning yum to keep things up to date.

udevinfo -V

But the version in FC3 should be fine.

Kay

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#5 lore raw
In reply to Mark Healey
Quoted 9 lines · Mark Healey
Quoted 5 lines · Kay Sievers

On Fri, 2005-02-04 at 14:08 -0800, Mark Healey wrote:
...

Quoted 3 lines

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

...

Quoted 2 lines
Quoted 2 lines

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

It could it be console.perms kicks in, overriding the udev permissions.

On my FC3 box:

	[root@aardbei security]# grep pilot /etc/security/console.perms
	<pilot>=/dev/pilot
	<console>  0600 <pilot>      0660 root.uucp
	[root@aardbei security]#

Your file modes are consistent with these settings. Console.perms is interpreted by PAM when you log in.

Regards,
Erik

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#6 lore raw
In reply to Mark Healey
Quoted 40 lines · Kay Sievers
Quoted 38 lines · Mark Healey
Quoted 23 lines · Kay Sievers
Quoted 7 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

Quoted 8 lines

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Hmm, does the rule work without ',' between the keys? And please use 4 digit octal numbers for the mode.

Quoted 6 lines

Other than that, I can't see what's going wrong here. How about just adding the permissions to the rule. In newer versions of udev the .permissions files are gone and you need to specify it along with the rules anyway.

SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

permissions file now reads:
pilot:root:root:0666

rules file now reads (minus mailer induced wraping):
SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Quoted 6 lines
Quoted 2 lines

Still get:
crw------- 1 mark root 188, 1 Feb 5 08:45 /dev/pilot

Strange. What does:
udevinfo -q all -n /dev/pilot

[mark@buttercup ~]$ udevinfo -q all -n /dev/pilot
P: /class/tty/ttyUSB0
N: pilot
T: c
M: 020666
S:
O: root
G: uucp
F: /etc/udev/rules.d/05-marks.rules
L: 1
U: 18508
R: 0

Quoted 1 line

print?

I don't know what you are asking here.

After reading Erik ban Konijnenburgs post I did some experiments.

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", MODE="0666", SYMLINK="pilot"

[root@buttercup rules.d]# ll /dev/pi*

crw-------  1 mark root 188, 1 Feb  5 13:49 /dev/piKYO7135
lrwxrwxrwx  1 root root      9 Feb  5 13:49 /dev/pilot -> piKYO7135

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", MODE="0666"

[root@buttercup rules.d]# ll /dev/pi*
crw-rw-rw- 1 root root 188, 1 Feb 5 13:52 /dev/piKYO7135

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", SYMLINK="pilot"

[root@buttercup rules.d]# ll /dev/pi*

crw-------  1 mark root 188, 0 Feb  5 13:54 /dev/piKYO7135
lrwxrwxrwx  1 root root      9 Feb  5 13:54 /dev/pilot -> piKYO7135

It looks like when there is a SYMLINK the MODE is ignored and the SYMLINK is 777ed no matter what.

Mabey the NAMEs and SYMLINKs should take permissions file type values. Such as:

NAME="pilot:hotsyncer:hotsyncgroup:0666"

Anyway it looks like you have a conflict with some other service and will have to decide which will take priority.

Thanks and Good Luck

Signature · 13 lines
Mark Healey
[email protected]


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#7 lore raw
In reply to Mark Healey
Quoted 61 lines · Mark Healey
Quoted 40 lines · Kay Sievers
Quoted 38 lines · Mark Healey
Quoted 23 lines · Kay Sievers
Quoted 7 lines · Mark Healey

I hope I'm not pissing anybody off but I can't find a support list. If I am, sorry.

Anyway, it seems that udev is ignoring my 05-marks.permissions. I would like to use my FC3 box to back up my Kyocera 7135 smartphone. Here is what I think is the relevant info. What am I doing wrong?

Quoted 8 lines

#]cat /etc/udev/rules.d/05-marks.rules SYSFS{idVendor}="0c88" SYSFS{idProduct}="0021" NAME="pilot"

#]cat /etc/udev/permissions.d/05-marks.permissions pilot:root:root:666

#]ls -l /dev/pi*
crw------- 1 mark root 188, 0 Feb 4 13:52 /dev/pilot

Hmm, does the rule work without ',' between the keys? And please use 4 digit octal numbers for the mode.

Quoted 6 lines

Other than that, I can't see what's going wrong here. How about just adding the permissions to the rule. In newer versions of udev the .permissions files are gone and you need to specify it along with the rules anyway.

SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

permissions file now reads:
pilot:root:root:0666

rules file now reads (minus mailer induced wraping):
SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="pilot", MODE="0666"

Quoted 6 lines
Quoted 2 lines

Still get:
crw------- 1 mark root 188, 1 Feb 5 08:45 /dev/pilot

Strange. What does:
udevinfo -q all -n /dev/pilot

[mark@buttercup ~]$ udevinfo -q all -n /dev/pilot
P: /class/tty/ttyUSB0
N: pilot
T: c
M: 020666
S:
O: root
G: uucp
F: /etc/udev/rules.d/05-marks.rules
L: 1
U: 18508
R: 0

Quoted 3 lines
Quoted 1 line

print?

I don't know what you are asking here.

I was asking for the content of the udev database. Your rules is applied correctly. You can see the 0666 for the mode.

Btw: That looks like a very old version of udev and not an actual FC3 one.

Quoted 21 lines

After reading Erik ban Konijnenburgs post I did some experiments.

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", MODE="0666", SYMLINK="pilot"

[root@buttercup rules.d]# ll /dev/pi*

crw-------  1 mark root 188, 1 Feb  5 13:49 /dev/piKYO7135
lrwxrwxrwx  1 root root      9 Feb  5 13:49 /dev/pilot -> piKYO7135

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", MODE="0666"

[root@buttercup rules.d]# ll /dev/pi*
crw-rw-rw- 1 root root 188, 1 Feb 5 13:52 /dev/piKYO7135

[root@buttercup rules.d]# cat 05-marks.rules SYSFS{idVendor}="0c88", SYSFS{idProduct}="0021", NAME="piKYO7135", SYMLINK="pilot"

Quoted 6 lines

[root@buttercup rules.d]# ll /dev/pi*

crw-------  1 mark root 188, 0 Feb  5 13:54 /dev/piKYO7135
lrwxrwxrwx  1 root root      9 Feb  5 13:54 /dev/pilot -> piKYO7135

It looks like when there is a SYMLINK the MODE is ignored and the SYMLINK is 777ed no matter what.

You can see that something other, probably the pam-console stuff changed the owner of the node to your username along with the permissions. As Erik pointed out, that looks like the reason for this.

Quoted 4 lines

Mabey the NAMEs and SYMLINKs should take permissions file type values. Such as:

NAME="pilot:hotsyncer:hotsyncgroup:0666"

We have OWNER, GROUP, MODE. What's the problem with that?

Thanks,
Kay

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel

#8 lore raw
In reply to Mark Healey
Quoted 2 lines · Kay Sievers

Btw: That looks like a very old version of udev and not an actual FC3 one.

I never installed it independently. Mabey Redhad it laging on keeping this one up to date.

Quoted 3 lines

You can see that something other, probably the pam-console stuff changed the owner of the node to your username along with the permissions. As Erik pointed out, that looks like the reason for this.

As long as it ignores symlinks I can get by.

Quoted 7 lines
Quoted 4 lines

Mabey the NAMEs and SYMLINKs should take permissions file type values. Such as:

NAME="pilot:hotsyncer:hotsyncgroup:0666"

We have OWNER, GROUP, MODE. What's the problem with that?

I was thinking so that you could do symlinks seperately.

Signature · 13 lines
Mark Healey
[email protected]


-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list  http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
#9 lore raw
In reply to Mark Healey
Quoted 9 lines · Mark Healey
Quoted 2 lines · Kay Sievers

Btw: That looks like a very old version of udev and not an actual FC3 one.

I never installed it independently. Mabey Redhad it laging on keeping this one up to date.

Quoted 5 lines
Quoted 3 lines

You can see that something other, probably the pam-console stuff changed the owner of the node to your username along with the permissions. As Erik pointed out, that looks like the reason for this.

As long as it ignores symlinks I can get by.

Be aware that the pam_console.dev uses the symlink names to match what to apply.

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

Mabey the NAMEs and SYMLINKs should take permissions file type values. Such as:

NAME="pilot:hotsyncer:hotsyncgroup:0666"

We have OWNER, GROUP, MODE. What's the problem with that?

I was thinking so that you could do symlinks seperately.

Symlink permissions are meaningless.

Thanks,
Kay

-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel