Skip to contentSkip to conversation

DiNovo in Bluetooth-Mode

Bluez-devel Markus Kohli 1 participant 1 message Feb 12, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi

I read some posts in the archives, because I was trying to get my DiNovo working under SuSE 9.2, and found this here:

Quoted 1 line
Quoted 1 line

I tested it with SuSE 9.2, Fedora Core 3 and Ubuntu. The only thing you

have

Quoted 12 lines
Quoted 12 lines

to do, is to call

hid2hci

Then you should see a message, like

Switching device XXXX:XXXX to HCI mode was successful

Now check with

hcitool dev

Quoted 8 lines
Quoted 2 lines

if it sees the bluetooth hub.

yes it did that, said it was successful,
BUT the keyboard & mouse stopped responding! The only way to get them working again was to reboot.

Laurence

Now, I found out how to get this working... Only enable the following bluetooth-services:
HCI
SDP
HID
HID2HCI

If you have any others, like obex stuff enabled, that'll block the keyboard and the mouse. With SuSE you can easily configure that by help of yast2, or by hand in /etc/sysconfig/bluetooth.
Then additionaly, once I had this working, the F-keys had gone missing, but an update to the latest kernel-of-the-day also fixed that (I'm running on 2.6.11rc3 now, that's probably got the -mh patch included).

Hope this helps anyone.

Kind regards
Markus

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel