Skip to contentSkip to conversation

kernel panic with 2.4.26

DISCUSSION Klaus Muth 2 participants 6 messages Jan 21, 2005 – Feb 21, 2005

lore
Share & tools
lore

Klaus Muth

author
#0 lore raw

Hi.
Every now and then (maybe twice a week) my server panics. This is a dual Xeon system with 5Gb memory. I did my best to get the full oops from the screen and doublechecked. Sorry, but I don't understand anything from the ksymoops output.
Any help will be appreciated.

ksymoops 2.4.5 on i686 2.4.26-msi1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.26-msi1/ (default)
-m System.map-2.4.26-msi1.nogood (specified)

f893281d
*pde = 00000000

Oops: 0002
CPU:    0
EIP:    0010:[<f893281d>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010256
eax: fffc43fc ebx: 00000002 ecx: f703b000 edx: 0000000d
esi: f187d000 edi: 00000000 ebp: f7005c1c esp: c0353ed4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0353000)

Stack: 00000000 f7040d00 00000000 f778a480 00000040 f7005c00 00000000 f703b000
       00040d00 f7007e80 f8921982 f7040d00 f7030b08 f778a480 00000002 00000000
       00000000 00000000 f703b200 00000000 f8921a9c f778a480 f7040d08 f77dc680
Call Trace:    [<f8921982>] [<f8921a9c>] [<c010a041>] [<c010a236>] [<c0106d60>]
  [<c0106d60>] [<c0106d60>] [<c0106d60>] [<c0106d89>] [<c0106df2>] [<c0105000>]
  [<c010504f>]
Code: 88 08 8b 86 58 01 00 00 ff 86 5c 01 00 00 88 10 ff 86 58 01
Quoted 7 lines
Quoted 7 lines

EIP; f893281d <_end+3851dc61/385fa444> <=====

eax; fffc43fc <END_OF_CODE+74ee74d/????>
ecx; f703b000 <_end+36c26444/385fa444>
esi; f187d000 <_end+31468444/385fa444>
ebp; f7005c1c <_end+36bf1060/385fa444>
esp; c0353ed4 <init_task_union+1ed4/2000>

Trace; f8921982 <_end+3850cdc6/385fa444>
Trace; f8921a9c <_end+3850cee0/385fa444>
Trace; c010a041 <handle_IRQ_event+5d/88>
Trace; c010a236 <do_IRQ+a6/ec>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d89 <default_idle+29/34>
Trace; c0106df2 <cpu_idle+3e/54>
Trace; c0105000 <_stext+0/0>
Trace; c010504f <rest_init+4f/50>

Code; f893281d <_end+3851dc61/385fa444>
00000000 <_EIP>:
Code; f893281d <_end+3851dc61/385fa444> <=====
0: 88 08 mov %cl,(%eax) <=====
Code; f893281f <_end+3851dc63/385fa444>
2: 8b 86 58 01 00 00 mov 0x158(%esi),%eax
Code; f8932825 <_end+3851dc69/385fa444>
8: ff 86 5c 01 00 00 incl 0x15c(%esi)
Code; f893282b <_end+3851dc6f/385fa444>
e: 88 10 mov %dl,(%eax)
Code; f893282d <_end+3851dc71/385fa444>
10: ff 86 58 01 00 00 incl 0x158(%esi)

<0>Kernel panic: Aiee, killing interrupt handler!

Could you please help me out?

klaus

author
#1 lore raw

Am Freitag, 21. Januar 2005 07:15 schrieb Klaus Muth:

Quoted 2 lines

Every now and then (maybe twice a week) my server panics. [...] Any help will be appreciated.

Did help myself. Seems to work.

Quoted 1 line

ksymoops 2.4.5 on i686 2.4.26-msi1. Options used

Updated to 2.4.29, keeping my kernel config. No panic since then (2 weeks) which seems to be a drastic decrease of the panics/week ratio ;).

klaus

#2 lore raw
Quoted 6 lines · Klaus Muth

Am Freitag, 21. Januar 2005 07:15 schrieb Klaus Muth:

Quoted 2 lines

Every now and then (maybe twice a week) my server panics. [...] Any help will be appreciated.

Quoted 7 lines

Did help myself. Seems to work.

Quoted 1 line

ksymoops 2.4.5 on i686 2.4.26-msi1. Options used

Updated to 2.4.29, keeping my kernel config. No panic since then (2 weeks) which seems to be a drastic decrease of the panics/week ratio ;).

Sorry, didn't spot your previous email.

I've not set aside time to investigate further, but turning HT off made the problem go away. Would be interested to hear further reports.

Regards,
Jonathan

author
#3 lore raw

Am Mittwoch, 16. Februar 2005 12:14 schrieb Jonathan Sambrook:

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Every now and then (maybe twice a week) my server panics. [...] Any help will be appreciated.

Sorry, didn't spot your previous email.

No problem ;).

Quoted 2 lines

I've not set aside time to investigate further, but turning HT off made the problem go away. Would be interested to hear further reports.

Server oopsed again 10 minutes ago. Same symptoms. The kernel upgrade did not help... Would an update to an 2.6 kernel help or should I better turn hyperthreading off?

klaus

#4 lore raw
Quoted 3 lines · Klaus Muth

Am Mittwoch, 16. Februar 2005 12:14 schrieb Jonathan Sambrook:

Server oopsed again 10 minutes ago. Same symptoms.

<sigh> schade

Quoted 1 line

The kernel upgrade did not help... Would an update to an 2.6 kernel help or should I better turn hyperthreading off?

My experience is running _modified_ 2.4 kernels. Turning HT off solved the problem here. Of course YMMV if the root cause is different.

I have no experience of running HT on 2.6. My hunch would be that more HT users run 2.6 than 2.4 nowadays, so the problem would've been raised by now? If so your choice depends on whether the joint benefits of HT and of 2.6 outweigh any effort of moving to 2.6.

Jonathan

author
#5 lore raw

Am Mittwoch, 16. Februar 2005 16:16 schrieb Jonathan Sambrook:

Quoted 6 lines
Quoted 3 lines · Klaus Muth

Am Mittwoch, 16. Februar 2005 12:14 schrieb Jonathan Sambrook:

Server oopsed again 10 minutes ago. Same symptoms.

<sigh> schade

Your help is really appreciated.

Quoted 6 lines
Quoted 3 lines

The kernel upgrade did not
help... Would an update to an 2.6 kernel help or should I better turn hyperthreading off?

My experience is running _modified_ 2.4 kernels. Turning HT off solved the problem here. Of course YMMV if the root cause is different.

Hypertreading turned off, machine crashed again in a matter of minutes. But
I took a photograph again and did run kymoops over the yield:
---------------------------------------

Unable to handle kernel paging request at virtual addresss ffffffff
f8a3589d
*pde = 00000000
Oops: 0002
CPU:    0
EIP:    0010:[<f8a3589d>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010256
eax: ffffffff ebx: 00000002 ecx: f5942000 edx: 0000000d
esi: e162f000 edi: 00000000 ebp: f60d701c esp: c0379ee4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0379000)

Stack: 00000000 f593d580 00000000 f77ba480 00000040 f60d7000 00000000 f5942000
       0093d580 f593fd80 f8a24982 f593d580 f6347188 f77ba480 00000002 00000000
       00000000 00000000 f5942200 00000000 f8a24a61 f77ba480 f593d588 f621ec40
Call Trace:    [<f8a24982>] [<f8a24a61>] [<c010a041>] [<c010a236>] [<c0106d60>]
  [<c0106d60>] [<c0106d60>] [<c0106d60>] [<c0106d89>] [<c0106df2>] [<c0105000>]
  [<c010504f>]
 <0>Kernel panic: Aiee, killing interrupt handler!

Warning (Oops_read): Code line not seen, dumping what data is available

Quoted 7 lines
Quoted 7 lines

EIP; f8a3589d <[ftdi_sio]ftdi_read_bulk_callback+361/438> <=====

eax; ffffffff <END_OF_CODE+754d54c/????>
ecx; f5942000 <_end+35507244/385d6244>
esi; e162f000 <_end+211f4244/385d6244>
ebp; f60d701c <_end+35c9c260/385d6244>
esp; c0379ee4 <init_task_union+1ee4/2000>

Trace; f8a24982 <[usb-uhci]process_urb+1e6/230>
Trace; f8a24a61 <[usb-uhci]uhci_interrupt+95/fc>
Trace; c010a041 <handle_IRQ_event+5d/88>
Trace; c010a236 <do_IRQ+a6/ec>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d60 <default_idle+0/34>
Trace; c0106d89 <default_idle+29/34>
Trace; c0106df2 <cpu_idle+3e/54>
Trace; c0105000 <_stext+0/0>
Trace; c010504f <rest_init+4f/50>
---------------------------------------

This strongly suggests a problem in the ftdi_sio_usb USB to serial driver and I filed this at the SourceForge bugtracker already.

klaus